1. Appearance inspection
When the mine box arrives at the site, the overall integrity should be determined as soon as possible.
2. Power supply system
Prior to operation, tighten all the screws of the power supply system first to avoid loosening of the screws during transportation. The total leakage protector is a 3-phase 380V power supply. It is necessary to ensure the correct connection and installation of 3 fires and 1 zero. During use, customers are not allowed to modify the power supply system in any form, and it is forbidden to carry the mining machine when it is powered on, so as to avoid unnecessary electric shock. If you ignore this regulation. All losses caused shall be borne by the customer.
3. Attention on the machine
When on the machine, the power supply of the miner should be placed under the miner. Otherwise, the number of seats will be insufficient. The customer is responsible for trimming the isolation board according to the size of the air outlet of the mining machine, and the manufacturer of the 4 corner heat return caused by the failure of the isolation board trimming.
4. Water supply system
The water curtain must pass water when the air temperature is greater than 35 degrees. A small stream of water can be used for drip infusion. The wetted area of the water curtain is more than 50%. Pay attention to water supply with small water flow, and prohibit water supply with water flow above 1.5 atmospheres.
5. Seat capacity
Each type of mobile mining box supports different power consumption. The size is also different, S9 should be prepared to put the power supply under the machine. S17 is placed normally. The width of the miner does not exceed 14.5CM, and it can be placed in the normal position, and overloading is prohibited during use, otherwise you will be responsible for the consequences.
6. Instructions for indoor and outdoor use
When the mine box is used in the house, the exhaust vent must exhaust air to the outside world. The loss of the machine or the power supply caused by the heat recirculation caused by incomplete ventilation shall be borne by the customer. Outdoors on rainy days. Customers should always check the integrity of the rain cover of the mine box. If the rain cover is not complete, please contact the manufacturer to buy a rain cover or install a rain cover by yourself.
7. Disclaimer
The user shall be responsible for the loss and robbery damage to the chassis caused by irresistible external environmental factors and human factors.
8. Compensation matters
This product is not a mainstream sales product, it is a customized product, and there is no refund once the deposit is transferred. If the user normally uses it according to the steps suggested by the manufacturer. The impact of the defect on the mining machine in use. Manufacturers fully cooperate with customers in upgrading and optimizing products and compensation matters.
9. Patent statement
The water-cooled server unit of model 36/84/168/210/420 has been patented, and imitation must be investigated.
10. After-sales issues
In the course of use, if the customer modified the mine box. After-sales service will be terminated immediately,
The normal after-sales time is 365 days. After the product is running, please contact WeChat through the device code: Angellepa to enter the after-sales group.
Each batch of orders with a common location only accepts one place for docking customers. When this product is sold by two hands, the customer should notify the factory through WeChat or two methods above. The factory will continue to guarantee the after-sales service of the product after confirmation.
If the processing plant is not notified, the after-sales service will be invalidated immediately.
11. After-sales service of negative pressure fan
The premise that the motor is only replaced and not repaired for 2 years is: the second month to the 24th month of use, the motor is used at the exhaust outlet of this product, and the user is responsible for all consequences of this product due to external force majeure.
12. The cleaning cycle is
The water curtain should be treated with scale treatment once every 6 natural months. The dust-proof net should be cleaned every 3 natural months.
13. Regular power failure and fixed detection cycle
Definite power supply system detection cycle: 3 natural months.
