High Performance Plastics 40% Glass Fiber PPS Rod

Reinforced glass fiber materials tend to crack due to their low tensile elongation, which means the larger scale the product has, the higher cracking risk it gets. Therefore, we highly suggest being careful during cutting. Please heat the material to 80°C by a hot air circulating airbox before machining, or soak it in hot water remained 80°C for 3 to 4 hours. It is significant to use a fine cutting tool during cutting and drilling. If it is for an uitra-precise part, please process it into a rough sample, then anneal it again before finishing.

l  Maximum operation temperature can reach 210°C (Notice: the actual mechanical performance drops to half of the normal temperature at 120°C).

l  Maintain high mechanical strength, stiffness, and hardness in high-temperature environments.

l  Excellent chemical resistance, insoluble in all organic solvents below 200°C.

l  Good radiation resistance.

l  The molecular structure contains sulfur atoms, which is inherently flame-retardant (UL94V-0)

l  Low dielectric constant and less dielectric loss, which can be a good material for 5G

l  When it couldn’t be met in the requirements of using PA, POM, PET, etc., while it will increase the cost if you use the PEEK, PI, and PAI, in that case, PPS is the best choice

l  3C electronic equipment components

l  Inspection fixtures

*Specific products could be made according to customers’requirements.

Hitex is supplying various of high temperature fabrics &textiles for thermal insulation, fire fighting, welding & cutting protecting, sealing & gaskets, refractory and composite industries. The technical fabrics are available with difference coating & treatment to working for extreme temperature and conditions etc.

If you have any inquiry, welcome to ask for quote and we will relpy you as soon as possible.

Q1.You are a trading company or manufacturer?

We are manufacturer with more than 10 years production experience, and we have our own factory in yuyao

.

Q2.Can you send me a sample? Is it free?

Yes, the samples is free, but the courier charge should be on your side

Q3.Mode of transportation?

By sea or by air

Q4.How about the Delivery time?

Usually around 2-3 weeks after order confirmed

Q5.Can you product the customized goods?

Surely, we can be customized according to your demanding. 

Q6.Do you have other production?

Certainly, We, Hitex are supplying various of high temperature fabrics &textiles for thermal insulation, fire fighting, welding & cutting protecting, sealing & gaskets, refractory and composite industries. The technical fabrics are available with difference coating & treatment to working for extreme temperature and conditions etc.

Q7.What kinds of payment you accept?

We accept T/T, D/A, L/C,D/P,O/A