Automatic Water Activated Kraft Paper Gummed Paper Tape Dispense

Share on:


Price:$701.00 - $762.00
Price in USD:Details

Quantity:


Product Overview

Description


Product Show of Automatic Water Activated Tape Dispenser


1 (10).jpg


Details of Automatic Water Activated Tape Dispenser


1 (2).jpg









































Description of Automatic Water Activated Tape Dispenser



Color



Black



Custom logo



Offer



Dispenser Size



45cm x 32cm x 28cm



Net Weight (without water) of Dispenser



12kg/piece



Suitable Tape Types



Externally coated kraft paper tape/


Internally coated kraft paper tape


(Reinforced & non reinforced)



Suitable Tape Specification



Width≤80mm



Speed



30cm/sec



Application



Cutting tape



 


Features of Automatic Water Activated Tape Dispenser


1 (7).jpg


Description of the Operation Panel


1 (5).jpg


Installation Instructions


1. Tape limit board installation instructions:
According to the actual width of the tape, install the limit board at the corresponding position.


A. Insert the upper end of the limit board into the corresponding groove on the slope.
B. Insert the lower end of the limit board into the corresponding groove on the slope.
C. After the limit board is inserted into the corresponding groove on the inclined surface, align it with the corresponding groove on the bottom surface.


1 (8).jpg


2.  Tape installation instructions
Pull the tape around the rod and pull it to the drive wheel (note that the front end of the tape needs to be cut flat). Pass the tape through the upper guide wheel and push it to the cutter.


1 (4).jpg


3. Pressboard installation instructions
Check whether the tape pressure plate is in place. Install the tape pressure plate as shown in the figure below.


1 (1).jpg


4. Brush operation instructions
A. First take out the water tank and fill it with water, then take out the water tank.
B. Aim at the upper surface of the brush and water evenly until the brush is completely drenched.
C. Put back the water tank, and then put it back into the water tank.
D. Gently press down the red part with your hand to make it fully contact with the brush


1 (3).jpg


5. Water tank operating instructions
Fill the water tank with water and place it in the corresponding position.
The water level of the sink can be adjusted at position A in the figure, and it is adjusted to the highest water level under normal conditions.
Note: Please pay attention to the amount of remaining water in the water tank when using it to ensure that the brush is kept moist.


1 (9).jpg


6. Maintenance instructions: regular maintenance based on actual use time


1 (6).jpg



Hot Products



 


Back homepage


















0.0116 s.