0.5mm non woven back pvc carpet roll carpet flooring plastic floors

Share on:

Price:$0.60 - $0.70
Price in USD:Details


Product Overview


Products Description

It can save 30% of the total cost when buying commercial pvc roll directly from factory!
Commercial pvc flooring roll linoleum flooring roll are generally produced by calendering. Among them, there are less fillers and more plasticizers than PVC tiles. Generally, the PVC vinyl flooring roll roby the four-roll calender factory is smoothed and smoothed after being calendered, and the product is rolled and wound after being cooled. The specifications of the coiled materials vary from country to country. The soft PVC vinyl commercial 2.0mm flooring material is soft, has certain elasticity, and feels comfortable.

Different Specifications Of Luckyforest Vinyl Flooring roll Options:

Available Size of vinyl flooring roll
Thickness of vinyl flooring roll
PVC: 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.6mm, 2.0mm
PET: 0.35mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.6mm, 2.0mm
Surface of vinyl flooring
Deep embossed / Registered emboosed / Sawn cut / Rough tick / Hand scrape / Crystal
Application of vinyl flooring
linoleum pvc floor roll and Wall
Warranty of luckyforest
10-15 Years
Residential Warranty
10-15 Years

Details Images

Construction requirements of pvc homogeneous vinyl flooring roll:
1. Before the paving of the concrete dense foam pvc flooring roll, the mortar C10 must be leveled 15-20 days in advance, and the leveling height is 5 mm lower than the ground design height. The leveling surface is glossy.
2. The flatness of the vinyl commercial roll pvc flooring roll plastic to the leveling of the foundation floor requires a height error of less than 2 mm per 2 meters.
3. The concrete and screed must be sufficiently dry before the vinyl flooring roll can be installed. It usually takes 15-20 days to construct. The moisture content of the entire surface does not exceed 5%.
4. The leveling layer must have sufficient bearing capacity, and there should be no cracks, empty drums and sanding of the pvc flooring roll. The strength of the base cement must be greater than 10Mpa.
5. The foundation vinyl flooring roll needs to be clean, free of grease, paint, glue, cement lumps, etc.
6. The vinyl flooring roll line is constructed after the floor is installed. Pay attention to protect the installed coil floor
during construction.
7. Where the coiled floor is connected to other grounds, the other floors must be installed and edged to ensure a smooth connection.

Construction process of pvc sponge back vinyl flooring roll plastic:
1. Roll up half of the coil and start to glue on the roll flooring. Note that the coated area per time does not exceed half of the area of a single coil. Cover the floor and repeatedly compact it with a special roller press. Note that when rolling, first roll horizontally and then longitudinally to squeeze out the residual gas under the vinyl flooring roll. The other half is the same as above.
2. When laying the second row of vinyl floorings roll, pay attention to keeping the direction of the vinyl flooring roll consistent. The adjacent floor is laid to overlap 15mm, then draw with a line drawing and cut.
3. To seal the seams, remove dust and debris from the vinyl flooring roll and the back of the coil before applying the glue, and leave a coin-thick seam between the seams to facilitate seaming.


The advantage of our vinyl flooring:

Operation of PVC flooring roll:
1. Select PVC vinyl flooring roll produced by regular manufacturers to ensure fire protection and environmental protection meet national standards.
2. According to the flow rate of the place of use and the design life, choose the appropriate LVT roll flooring. This link is very important. The material selection is inadvertent, which directly leads to the continuous quality problems in the subsequent use of the vinyl floor roll.
3. Use professional staff to install PVC lvt flooring roll to ensure the smooth and smooth treatment of the ground floor, the correct selection of floor glue, and the reasonable laying of the indoor vinyl flooring roll, without leaving any quality hazards.
4, PVC spc flooring roll installation is completed, to do the vinyl flooring roll maintenance, care work, PVC flooring roll easy to care, but can not be ignored, reasonable maintenance, care work can effectively extend the life of PVC flooring roll.

PVC flooring decorate rendering:

Invented in the 1930s, vinyl flooring first made an impact on the architectural world in the years following World War II. By the1950s, it was a major competitor against other resilient options and had all but surpassed linoleums'position as the best low-cost water-resistant flooring option for locations such as bathrooms and kitchens.
A variety of desirable characteristics continues to make this versatile flooring material a popular option to this day.

As one of the largest factory of flooring in the north of China, We possess a modern production base of 50,000 Square meters. We has been focusing on manufacturing, researching and selling flooring products with up to more than 10 years experience, we provide OEM brand services for the customers around all the world. And We also have our own brands like “LABUSN®”, “LUCKY FORREST™”.

0.0161 s.