fully automatic top hardware 550 pulley straight line steel iron wire rod drawing machine price (1600307741638)

Share on:


Price:$900.00 - $1,000.00
Price in USD:Details

Quantity:


Product Overview

Description


fully automatic top hardware 550 pulley straight line steel iron wire rod drawing machine price


 


 




Straight-Line Wire Drawing Machine





  • High effective,high drawing speed in normal production

  • Easy operation,delightful man-machine interface

  • Optimized design,high reliability,low faults ratio

  • High quality finish wire due to no sliding,no torsion in drawing

  • Clean production environment due to install dust remove and air blowing system

  • Equip with advanced motors,high efficiency and saving energy

  • Low noise level compare to old type drawing machine

  • Perfect cooling system design-water cooling plus high pressure air cooling

  • Flexible control system for optionalProfibus or simulation input/output


_20210602140455.jpg 


 


















































Model



Block Dia.(mm)



Max.Draw Passes



Max.Inlet Wire Dia. (mm)



Min.outlet Wire Dia.(mm)



Motor Power(KW)



Max.outlet Speed(m/s)



Noise Level(dBA)



LZ-400



400



less than14


 



3.8



0.75



11-15



15



less than 82



LZ-500



500



less than12



6.5



1.8



18.5-22



12



less than 82



LZ-550



550



less than12



7.0



1.8



22-30



12



less than 82



Remark



Above parameters is base on standard configuration,only for reference,we can customize the machine according to user’s specific requirements,



_20210602140614.jpg_20210602140621.jpg


 mmexport1624096446854_202107241552061


Technical Parameter of Dry Type Wire Drawing Machine


 


 


 


I. Composing of production line


 


Pay-off → Pulley type wire drawing machine → Horizontal take-up 


 


II . Instruction of wire drawing machine


1. Drive System


The way of transmission for wire drawing machine is by: Variable frequency motor + Narrow v-belt + Decelerator with hardness gear surface + Narrow v-belt to drive the block.


2. Block


Block is accurately founded by cast steel, re-tempering treatment after the rough processing, the work surface of block is welded by wear-resisting piano wire then sprayed with carbide tungsten, then finish machined by a grinding machine. The block working surface rigidity is over HRC60. The inside surface of block is sprayed with Aluminum.


Block inside adopts narrow gap type water cooling while block outside adopt concentrate air cooling. All blocks are fixed with leaning rollers.


3. Die box


All are normal die boxes(die dimension should be offered by client). Die box is cooled directly by water.


Tuning roller is driven by cylinder. Die box can be adjusted up to down, front to back, left to right agility and can be fixed. The screw in top and nut for die box are both made of tin bronze. Hard alloy made direction guiding die is fixed at die box inlet.


4. Gearbox


The chief bearings for gearbox with hard gear surface adopt products from Japanese NSK. All gearboxes are filled with VG220 compound gear oil before leaving factory.


5. Safety cover


On the top of each block there is a safety cover, which needs to close before the equipment start up. If the cover is open, the equipment can only run in slow speed. The safety cover has covered the total front of operation side and have daylight lamp inside for illuming use. Safety cover is controlled by spring.


6. Lubricating


Electric driven grease pump is fixed, which can automatically fill oil into the chief shaft bearing of block.


7. Take-up


The coiler take-up adopts frequency conversion motor drive, to achieve no-parking taking up. There are two rows of slide rail on the bottom of bearing frame, to easy to replace the frame. (The size of bearing frame is provided by the user).


Note: We can produce according to customers' requirements.


 


 


Dry type wire drawing machine


1.jpg.jpg


 


 Dry Type Water-cooled Wire Drawing Machine


_20210304140436.jpg


 


 


 


2.jpg


3.jpg


4.jpg


5.jpg


 


7.jpg


1600307741638
0.0101 s.