Factory Supply High Voltage Triple Winding Machine Suitable For Non crystal Transformer (1600318579010)

Share on:


Price:RUB 2,295,306.00
Price in USD:Details

Quantity:


Product Overview

Description

                                    Three coil automatic wire winding machine ZBR-500-3
GDY-0.5T Low voltage winding machine
No.
Component
Technical parameter
1.1
Height of spindle center
850mm
1.2
Winding axial distance
MAX:800mm
1.3
Windable coils
O.D.:800mm; I.D.:80mm
1.4
Work torque
800N
1.5
Winding Speed (MAX):
250 r/min
1.6
Winding power
7.5KW
1.7
Winding shaft spec
60*60*2400mm / customized
1.8
Servo motor winding around the trip
550mm
1.9
Cable way
Ball screw guide Servo system
2
Wire rang
2.1
Round wire
Ø0.6-Ø4.0mm
2.2
String cable specifications
Ø0.15-Ø0.8mm
3
Layer insulating
Air shaft 3 sets
3.1
Tension way
Pneumatic 3 sets
3.2
Width of insulating paper
100-650mm
4
Double-axis release frame M35
4.1
Flat wire
Pneumatic
4.2
Round wire
Console mode
5
Disassemble coil
Tailstock 90° rotation
6
Encoder count
Five stages(0-9999.9)
7
Operation method
Touch screen Taiwan Delta
8
The inverter
Taiwan Delta
9
PLC
Mitsubishi
10
Servo motor
Taiwan Delta
11
Voltage and Electricity
Omron LS Taiwan Tiande etc.
12
Roller lifting working table
Lifting height 150mm
Description of main parts of equipment
1. Foil roll-coil device
1) the device is composed of open coil head, gearbox, gear reducer, motor, rectifying actuator, press roll, etc. The main function of the device is to produce foil tension and foil rectifying.
2) the tension is an open-book create tension during winding or retreat, the manner, winding speed, tension is stepless given according to process requirements, the size of the tension adjustment convenient and accurate, foot switch control winding or back.Rolling device
3) the whole through linear guide connection on the base, through the foil band edge detection photoelectricsensing device (the rack), high precision gear reducer and motor and ball screw foil with correction.
The rectifying method adopts the photoelectric detector, accurate and reliable, low failure rate and convenient maintenance.

2.nsulation and roll device
1) the device consists of a reel shaft and a motor clutch controller.
2) there are two layers of insulation and scrolls, and the scrolls are used for air expansion shafts.
3) it is convenient to load and unload gas.The whole device is placed in a small car, which can be pulled out as a whole, so as to facilitate the loading and unloading of the material and the adjustment of the cutting edge. The outside of the body is not guided, not taking the place, and the site is neat and beautiful.
4) the insulation tension of the layer depends on the magnetic powder clutch, resulting in tension control and no noise.
The size of tension is not specified, and the tension of the winding diameter from large to small is constant.The entire device and each reel can be manually adjusted in width direction.

3. Welding equipment
1) the welding of foil and lead is adopted TIG welding, and the welding equipment is mainly composed of the following parts: jig,welding gun driving mechanism, welding gun adjustment mechanism, TIG welding machine, cooling water tank, etc.
2) the open pressure of the clamping part is realized by pneumatic, the welding gun can be adjusted up and down, and the welding gun is driven by frequency conversion motor, and the speed is not adjustable.
3) the whole device can move (electric) to or from the welding area.The welding table can move the Angle (60 degrees) so that the foil belt, especially the thicker foil, can be carried through theclamping part and adjust the welding Angle.

4. Cleaning device
On top and bottom felt plate holding foil bring remove foil with metal shavings, dust and other impurities, the mat plate underthe action of a cylinder can be up or down, the clamping force can be adjusted through the pressure regulator.
When the upper plate is clamped tightly, the entire device can float with the foil band, and the whole foil belt can be
automatically returned.The felt plate body is fixed with screw respectively, but can be removed as a whole to replace the felt.
Products Categories
Product Details
Company Information
Certifications
Production Process
Packaging Shipping
FAQ
1)Q: Are you manufacturer or trading company?
A:We are both manufacturer and trading company,we can customized as per your requirements ,and so we can provide best quality at competitive price .

2)Q:.how can we guarantee quality?
A:we have superior engineer,who have rich experience in producing and developing ,ensure the quality can meet your ideal demands.Besides we strictly control each production chain, all machines have to be tested before loading.

3)Q:what can you buy from us?
A:Transformer coil Winding Machine,Foil Winding Machine,Vacuum Equipment,Facility&Tooling,Silicon steel sheet shears;

4)Q:What about the payment term ?
A:Payment terms are 50% T/T in advance, 50% T/T payment before delivery.

5)Q:And the delivery time?
A:Usually the delivery will be arranged in 60 working days after received your down payment,

6)Q: what services can we provide?
A:Accepted Delivery Terms: FOB,EXW;
A:Accepted Payment Currency:USD,EUR,CNY;
A:Accepted Payment Type: T/T,Western Union,Cash;
A:Language Spoken:English,Chinese,

1600318579010
0.0084 s.