16DI 16DO Transistor Output Multi Channel PLC Industrial Controller Programmable
- Category: PLC >>>
- Supplier: Shenzhen,Coolmay,Technology,Co.,Ltd.
Share on:
Product Overview
Description
Specification
Programming language | Ladder diagram(LD) / lnstruction list / Sequential function chart(SFC) | ||
Program capacity | 32k steps | ||
Storage capacity | Date (D) | [D0~D127] 128points General / [D128~D7999] 7872points Retentive / [D8000~D8511]512points Special | |
Expansion(R) | [R0~R22999] 23000points Support power-down retention / [R23000~R23999] 1000points Internal use | ||
Expansion model | Max limit of 31 units: max 12 analog input/output respectively | ||
Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and output points) | ||
CPU Digital I/O | 16DI / 16DO | ||
CPU analog I/O | NA | ||
Timer T | [TO~T199] 200points 100ms General / [ [T250~T255] 6points 100ms Retentive [T246~T249] 4points 1ms cumulative Retentive / [T256~T319] 64points 1ms General [T200~T245] 46points 10ms General | ||
※The 10ms timer is affected by the scan period. lf the scan period is 12ms,the timer becomes 12ms and executes once. | |||
16-bit counter C | [CO~C15] 16points General | ||
32-bit counter C | [C200~C219] 20points General | ||
[C235~C245 Single phase single counting][C246~C250 single phase double counting] | |||
[C251~C255 Two-phase double counting] | |||
High-speed pulse | 4-axis 200KHz+4-axis 50KHz (Y0-Y3 each 200KHz; Y4-Y7 each 50KHz, total should not be over 200KHz) | ||
High-speed counter | 6 channels 60KHz | ||
Do type | LO2M32T/LO2M24T: Transistor output, load maximum 500mA, low level NPN, COM connected to negative | ||
LO2M32R/LO2M24R: Relay output, load maximum 2A, dry contact, COM can be connected to positive ornegative | |||
Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN | ||
Protocol | Programming port Modbus RTU, Modbus TCP, Modbus UDP, freeport protocol, CAN, Ethernet/IP, BD board | ||
Data backup function No battery storage | Program | Flash ROM | |
Retentive area | MRAM has no write limit | ||
Calendar(RTC) | Commercially available batteries CR1620(optional) | ||
Self-diagnosis | CPU abnormalities, internal memory problems, etc | ||
Rated input voltage | 24VDC(土10%) | ||
Software | Compatible with GX WORKS 2 | ||
Product Description
Packing & Delivery
Company Profile
Located in Shenzhen, south of China, Coolmay has been committed to the field of automation control based on the business philosophy of "cooperation, integrity, pragmatism and innovation" since 2006. It is a high-tech enterprise which researches, develops and manufactures HMI+PLC all-in-one, PLC controller, HMI and other automation products, and provides automation technology services.
Mission: Keep innovation. Move forward.
Mission: Keep innovation. Move forward.
FAQ
Advantages:
*Could use GX Developer and GX Works2 software to program,read,download, verify, diagnose,monitor and process sequence.
*Could use RD3A to read AD data and WRA3 to output DA data (can set upper and lower limit ranges).
*Support optional one RS485 or RS232 COM Port,support Programming port protocol and MODBUS-RTU.
*Support RTC function,when password is 12345678,the programming softwarecan't modify clock data.
*Support High Speed counter input and High speed pulse output.
*Support Watch dogs function-compatible with Mitsubishi FX2N.
*Support external interrupt function-compatible with the original Mitsubishi ,support pulsecapture function.
*Support super password: When password is 12345678,the program can't read.
*Can Check the downloaded ladder program.
*Could use GX Developer and GX Works2 software to program,read,download, verify, diagnose,monitor and process sequence.
*Could use RD3A to read AD data and WRA3 to output DA data (can set upper and lower limit ranges).
*Support optional one RS485 or RS232 COM Port,support Programming port protocol and MODBUS-RTU.
*Support RTC function,when password is 12345678,the programming softwarecan't modify clock data.
*Support High Speed counter input and High speed pulse output.
*Support Watch dogs function-compatible with Mitsubishi FX2N.
*Support external interrupt function-compatible with the original Mitsubishi ,support pulsecapture function.
*Support super password: When password is 12345678,the program can't read.
*Can Check the downloaded ladder program.
Manuals:
https://drive.google.com/drive/folders/1Hs5mi-FCo9FppYreu9w5LxaRAOjKU19Y?usp=sharing
https://drive.google.com/drive/folders/1Hs5mi-FCo9FppYreu9w5LxaRAOjKU19Y?usp=sharing
Software:
https://www.dropbox.com/sh/kyhp0y2nauvq7l5/AABQ_PLomhdNlYjBeLaHv2fGa?dl=0
https://www.dropbox.com/sh/kyhp0y2nauvq7l5/AABQ_PLomhdNlYjBeLaHv2fGa?dl=0
