China Goods Wholesale Three tube Flame Gun Blow Torch Skyasia Repair Heating Oxygen free Multi head Welding Torches
- Category: >>>
- Supplier: Dongguan Xinchangda Precision Technology Co. Ltd.
Share on (1600327613485):
Product Overview
Description
Products Description
China Goods Wholesale Three-tube Flame Gun Blow Torch Skyasia Repair Heating Oxygen-free Multi-head Welding Torches
Welding Torches Specification | ||||||||
Product Name | Welding gun | |||||||
Material | Copper + stainless steel | |||||||
Scope of application | Welding, heating | |||||||
Applicable gas | Propane, Butane, MAPP | |||||||
Product Size | 30*17*4cm | |||||||
Package includes | Welding torch*1 | |||||||
OPERATIONAL WARNINGS
* ● Do not operate the torch with a flame that is less than 1/4 inch long because it can overheat the mixing tube and cause flameoutage or flashback.
* ● Do not operate the torch with a flame that is less than 1/4 inch long because it can overheat the mixing tube and cause flameoutage or flashback.
* ● Do not hold the tip of the torch too close to the work piece. This can cause the flame to go out, cause flashback and weld the tip shut.
* ● Do not operate the torch if the section of the mixing tube that is directly in front of the torch handle becomes hot.
Although the section of the mixing tube immediately behind the tip of the torch can get hot, the section of the mixing tube
directly in front of the handle should never get hot. lf this occurs, extinguish the torch immediately by turning OFF the
oxygen valve and then the fuel valve. Allow the torch to cool and then check the tip of the torch for blockage. If the tip is
unblocked and clean, relight the torch. If the section of the mixing tube that is directly in front of the torch handle still
becomes hot, discontinue use of the torch and contact RTM immediately.
* ● If the flame disappears unexpectedly, immediately turn OFF the oxygen valve and then the fuel valve. Disconnect the oxygen and fuel valves from their cylinders and re-open the valves to bleed the hoses.
* ● Place the cylinder stand on a stable and level surface. Improper stand position, such as placing the stand on its side, could cause accidental tip over leading to liquid fuel entering the hose and causing an excessively long flame. This is called flare and is very dangerous. It can alsocause the flame to go out.
* ● DO NOT USE THE TORCH IF THE HOSES SWELL DURING OPERATION. THE HOSES MAY RUPTURE UNEXPECTEDLY AND CAUSEINJURY OR DAMAGE. If the hoses swell, stop using the torch by turning OFF the oxygen valve first and then the fuel valve, Disconnect the valves from the cylinders and then re-open the valves to bleed the hoses. Replace the torch assembly before relighting.
* ● Do not operate the torch if the section of the mixing tube that is directly in front of the torch handle becomes hot.
Although the section of the mixing tube immediately behind the tip of the torch can get hot, the section of the mixing tube
directly in front of the handle should never get hot. lf this occurs, extinguish the torch immediately by turning OFF the
oxygen valve and then the fuel valve. Allow the torch to cool and then check the tip of the torch for blockage. If the tip is
unblocked and clean, relight the torch. If the section of the mixing tube that is directly in front of the torch handle still
becomes hot, discontinue use of the torch and contact RTM immediately.
* ● If the flame disappears unexpectedly, immediately turn OFF the oxygen valve and then the fuel valve. Disconnect the oxygen and fuel valves from their cylinders and re-open the valves to bleed the hoses.
* ● Place the cylinder stand on a stable and level surface. Improper stand position, such as placing the stand on its side, could cause accidental tip over leading to liquid fuel entering the hose and causing an excessively long flame. This is called flare and is very dangerous. It can alsocause the flame to go out.
* ● DO NOT USE THE TORCH IF THE HOSES SWELL DURING OPERATION. THE HOSES MAY RUPTURE UNEXPECTEDLY AND CAUSEINJURY OR DAMAGE. If the hoses swell, stop using the torch by turning OFF the oxygen valve first and then the fuel valve, Disconnect the valves from the cylinders and then re-open the valves to bleed the hoses. Replace the torch assembly before relighting.
* ● Always use tools, such as tongs or pliers, to handle brazing/welding rods because they could be hot.
* ● Beware that certain surfaces can reflect and transfer the heat back to the torch handle causing damage or injuries.
* ● In cold weather the size of the flame will be smaller.
* ● Always carry the torch by the handle and make sure the valve side of the cylinders is not tipping downward, which could cause the cylinders to fall Out of the stand.
* ● Beware that certain surfaces can reflect and transfer the heat back to the torch handle causing damage or injuries.
* ● In cold weather the size of the flame will be smaller.
* ● Always carry the torch by the handle and make sure the valve side of the cylinders is not tipping downward, which could cause the cylinders to fall Out of the stand.
Related Products
Company Information
FAQ
1. Why choose us?
First of all, quick respond, save your time, time equals money, so we save money for you.And you can see that the product meets your purchasing needs and you can place an order directly.
2. Should I worry about the quality?
Before delivery, we do test the machine working condition for you.
3.How can I know your machine is designed for my product?
You tell us the specific parameters of your product, or you can send us samples of your product and we test it on machine. Such as tips.
4.How's about the transportation?
Tell us which one you don't like, we will keep that in mind.or you can arrange the forwarder to us or through Alibaba express.
5.How to operate the equipment?
My friend, don't worry about it, we have made videos and operation manual for you,it will show you how to do it step by step.and you also can come to China to learn how to operate .or we arange the engineer to your country.
6.When the machine can't work well,What should I do?
The Engineer is online for 24-hours, they can check the problems and then give you solution way very soon.Please rest assured that operation CD and manual will be offered along with machine, ensuring you can operate the machine easily.
7.Are you a trade company or manufacturer?
Manufacturer
8.About delivery time
Usually 7-15days , but if the machine is Non-standard customization ,delivery time will be longer.
First of all, quick respond, save your time, time equals money, so we save money for you.And you can see that the product meets your purchasing needs and you can place an order directly.
2. Should I worry about the quality?
Before delivery, we do test the machine working condition for you.
3.How can I know your machine is designed for my product?
You tell us the specific parameters of your product, or you can send us samples of your product and we test it on machine. Such as tips.
4.How's about the transportation?
Tell us which one you don't like, we will keep that in mind.or you can arrange the forwarder to us or through Alibaba express.
5.How to operate the equipment?
My friend, don't worry about it, we have made videos and operation manual for you,it will show you how to do it step by step.and you also can come to China to learn how to operate .or we arange the engineer to your country.
6.When the machine can't work well,What should I do?
The Engineer is online for 24-hours, they can check the problems and then give you solution way very soon.Please rest assured that operation CD and manual will be offered along with machine, ensuring you can operate the machine easily.
7.Are you a trade company or manufacturer?
Manufacturer
8.About delivery time
Usually 7-15days , but if the machine is Non-standard customization ,delivery time will be longer.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
