Share on:
Model | AW-CFP2166-2W/4W | ||||||
Main Voltage | 220V AC 50HZ/60HZ | ||||||
Batteries | 2*12V / 2.3Ah sealed lead acid gel, self-regulated | ||||||
Battery low-voltage protection | 21V | ||||||
Detectors connection allowed each zone | 20 detectors (except MCPs) | ||||||
Zone alarm current | 6mA minimum/ 27mA maximum | ||||||
Sounder output | 0.2A maximum | ||||||
Relay contacts rating | 1A @30VDC | ||||||
Loop output | 1 addressable horn strobe with transmitter each zone 20 wireless devices for each addressable horn strobe | ||||||
EOL resistor for zone and sounder outputs | 6.8K ohm 1W | ||||||
Environmental | Class A temperature range: -5 to 40°C (23~104°F) Humidity: 5 to 95% RH, non-condensing | ||||||
Fuse for AC Power | 1 A/ 250V glass tube fuse slow blow 5 X 20mm | ||||||
Fuse for DC Power | 1 A/ 250V glass tube fuse slow blow 5 X 20mm | ||||||
Terminal blocks rating | All terminals rated for 12 to18 AWG(0.75 to 2.5 mm²) |
✔ Automatic power switchover | ||||||||
✔ 24V2.3Ah High-capacity batteries | ||||||||
✔ Fault supervision and notification | ||||||||
✔ 2 relay output circuits | ||||||||
✔ 1 sounder output circuit | ||||||||
✔ Sounders and panel buzzer silence | ||||||||
✔ Loop for wireless devices | ||||||||
✔ Meets all requirements of latest EN54 part 2 and EN54 part 4 |