Share on:
Cummins engine Parameters | Tomato&Potato | |
Engine Model | KTA19-G8 | |
Number of Cylinders | 6 cylinders | |
Cylinders arrangement | Vertical in line | |
Cycle | 4 stroke | |
Aspiration | Turbocharged and water cooled | |
Bore×Stroke | 159mm x159mm | |
Displacement | 18L | |
Compression ratio | 13.9:1 | |
Standby Power/Speed | 575KW/1500rpm | |
Fuel Consumption at 100% Load | 128L/h |
Alternator Parameters | Tomato&Potato | |
Alternator brand | Stamford, Marathon, Leroy Somer, Mecc-alte, TWGII… | |
Prime power | 520kw | |
Frequency/speed | 50Hz/1500rpm | |
Exciter type | Single bearing, Brushless, Self-excited | |
Power factor | 1 | |
Voltage adjust range | ≥5% | |
Voltage regulation NL-FL | ≤±1% | |
Insulation Grade | H | |
Protection Grade | IP23 |
Controller Panel | Tomato&Potato | |
Brand | Deepsea/ComAp/SmartGen | |
Function | The control module gives digital readouts of: Generator voltage; Output frequency; Engine speed; Battery voltage; Engine hours run. The control module has indicators for failure information: Overspeed/underspeed; Emergency stop; Low oil pressure; Battery charger failure High water temperature; Failure to start Automatic shutdown occurs under: Low engine oil pressure; High engine water temperature; Overspeed/underspeed; Failure to start after three attempts. |