Натуральные и реалистичные деревянные зерна wpc настенная панель для использования вне помещений

Share on:

Price:1,00 $ - 5,00 $
Price in USD:Details


Product Overview


Product Description

Product Name
GW908 shadow gap Co-extrusion WPC decking
WPC, wood plastic composite, HDPE, wood fiber
Anti-slip, Anti-UV, 
Normal package, plastic package, carton box...
2.9meter 3.6meter
880sqm for 20GP

  • Product performance description

Grinwood co-extrusion decking is capped wood-grain composite boards
Has a shield arround core
The material of Shield: modified plastics
Top important Advantage: color stable

The shield uses an advanced polymer layer as a protection layer, which gives the boards against fading, staining, mold mildew, and scratching
The core is made from recycled plastic and high dense recycled wood fiber that allow for greater strength and durability


60% of wood fiber
Mainly use Poplar powder and Eucalyptus powder
Compared with mineral fibers, wood fiber raw materials have a wide range of features, low price, can be reprocessed, can be
naturally regenerated, biodegradable, low density and so on
In addition, wood fibers are used as an enhanced material in thermoplastics and show better mechanical properties, such as low
hardness, low wear on processing equipment
30% of plastic
We use HDPE
The choice of plastic mainly from its own performance, product requirements, supply situation and cost。
Due to the thermal stability of wood fibers, only thermoplastics with melting points below 200 ℃ are usually used in WPC production
Commonly used plastics are recycled polyethylene(PE), polypropylene(PP), polyvinyl chloride(PCV) etc.
Among them, PE has always been the most important plastic raw material in wood plastic production.
10% additives
Added to the formulation of plastics and other composites to improve its sun resistance and prevent or reduce the damage caused to
plastics by UV rays in sunlight, collectively known as photostabilizers
Antioxidants can slow or inhibit plastic oxidation degradation
Lubricants can reduce friction and change the processing performance during the molding process of wood-plastic composite

Colorants, antistatic agents, anti-mold and preservatives are also added to the formula

Quality Control

Wear Resistance


Surface Hardness




Flexural Strength


Related Products


Cargos package suggestions below

Company Introduction

GRINWOOD WPC is a superior alternative to traditional lumber and plastic decking products. It mixes recycled PE plastics with cellulose fiber and etrudes them into a variety of profiles, including decking, fencing, wall cladding, etc.

1. Our main market is Europe, regarding the quality, 200% better than EU standard EN15534-1
2. (FSC® 100% Certified) wood fiber is acceptable
3. Our boards can bear up to 60 ℃



1. Why choose wpc as outdoor buliding material?

Modern engineering and design solutions require modern materials. The usage of wood plastic materials for decking, fences and garden areas is economical, eco-friendly and future-proof solution.

2. What's the Grinwood WPC made of?

GRINWOOD WPC boards are Eco-friendly wood and plastic composite products composed from 60% wood fiber , 30% HDPE and 10% additives.

3. How far apart should the supporting joist be?

The supporting joist below the composite decking boards should be a maximun of 350mm apart. in other words, one square meter need: 3 joist and 20 sets accessories (clips & screws)

4. Can I install the decking immediately when received the products?

When received your wpc decking boards, we recommend you allow them several days to adjust to
your local temperature and conditions before starting working. We do not recommend installing your deck in cold weather.

5. Do I need special tools to install the deck?

There are no specialist tools required. The decking can be installed using the same tools you would use to install timber decking.

0.0139 s.