Polyurethane Resin liquid Fast dry and colorful 20KG Set packing polyurethane flooring resin
- Category: >>>
- Supplier: Foshan Madoff Chemical Co. Ltd.
Share on (1600345731189):
Product Overview
Description
Liquid Polyurethane Epoxy Resin Mortar Self-Leveling
Non-Skid Floor Coating
Product Description
M-205 Polyurethane flooring Resin is made of high-performance waterborne polyurethane resin as the base material, high strength cement, active grade silica sand and pigment as the aggregate, which is four components of colorful water-borne mortar floor coating rich in resin.Waterborne polyurethane mortar non-slip floor has good wear resistance, impact resistance, chemical resistance and other physical erosion, can bear heavy load.
Specification
Inspection items | Parameter values | ||||||||||||
State in container | After stirring, there is no hard block and it is uniform | ||||||||||||
Coating appearance | Flat, no play mark, wrinkle, pinhole, bubble and other defects | ||||||||||||
Drying time H (25℃) | Surface dry ≤8 | ||||||||||||
Full dry ≤24 | |||||||||||||
Hardness/H | ≥H | ||||||||||||
Impact resistance Steel ball(50mm*500g 100cm high) | Coating without crack, no peeling | ||||||||||||
Abrasion resistance(750g/500r)g | ≤0.020 | ||||||||||||
Slip resistance (dry friction coefficient) | ≥0.60 | ||||||||||||
Tensile bond strength, 7d standard condition/MPa | ≥2.0 | ||||||||||||
Low/high temperature resistance test | Can withstand -40℃ to 120℃ cycle change | ||||||||||||
Compressive strength / MPa | ≥50 | ||||||||||||
Water absorption rate % | ≤0.10% | ||||||||||||
Water resistance (168H) | No foaming, no peeling, allow slight discoloration | ||||||||||||
Chemical resistance | 15% NaOH solution 72h | No foaming, no peeling, allow slight discoloration | |||||||||||
10% HC1 solution 72h | No foaming, no peeling, allow slight discoloration | ||||||||||||
120# solvent gasoline 72h | No foaming, no peeling, allow slight discoloration | ||||||||||||
Applications
M-205 can be used in the following workshop, factory floor: food processing plant, dairy plant, distillery, distillery;
Production workshops and laboratories of pharmaceutical intermediates;Wet and dry processing area, cold storage, freezing area;Chemical processing plant, pulp and paper industry factory, large warehouse and storage area floor area.
Production workshops and laboratories of pharmaceutical intermediates;Wet and dry processing area, cold storage, freezing area;Chemical processing plant, pulp and paper industry factory, large warehouse and storage area floor area.
Construction parameters
Process name | Specific practice and requirements | ||||||||||||
Base surface treatment | 1.On the base surface for heavy sandblasting or milling processing, if there is any drainage hole, should be near and around the vertical pendant for hook type cutting. 2.Draw a diagonal line on the base and cut along the line to a depth of about 20mm to prevent shrinkage of the coating. 3.Clean up the ground sand and remove the residual dust with a vacuum cleaner. | ||||||||||||
Sealing coating | 1. Use the interface agent to spread evenly on the clean base surface. 2. Then spread the quartz sand over the still wet primer.The materials must be used up within 25 minutes after mixing. 3. After the primer is solidified, remove the excess quartz sand, polish the base surface and remove the residual dust with industrial vacuum cleaner. | ||||||||||||
Paint coating | 1. After the closed layer is dry, use the four component materials to mix carefully and stir for about 3 minutes to reach a smooth and uniform mortar state. 2. Smooth the material with a flat knife and evenly scrape it on the surface of the dry and solid closed layer to the required thickness. It is not advisable to wipe it repeatedly to ensure the uniform distribution of liquid materials. 3. Roll the surface evenly with a water-wetted wool roller.The materials must be used up within 25 minutes after mixing. | ||||||||||||
Our Advantages
We are a professional manufacturer engaged in the research,development,productions and sales of acrylic type pressure sensitive adhesive,solvent based acrylic resin ,epoxy Resin and polyisocyanate hardener 10 years.
We make sure to offer the best service for our customers!
We make sure to offer the best service for our customers!
Company Profile
Foshan Madoff Chemical Co., Ltd. was founded in 2011 , located in Foshan China , which is professional engaged in the research,production and sales of high quality Oil glues, Water based glues，Packaging Clear Tapes , ect. Our factory have a perfect supply chain system, with 8 sets of main reactor equipment, the annual output is 80,000 tons. Products are widely used in electronic products, leather bags, furniture, woodwork, outdoor advertising and other special strong performance industries. Waterborne adhesive is suitable for label, wallpaper, woodwork paint, protective adhesive, cooling table, paper adhesive, composite adhesive, floor adhesive, 0PP acrylic 10, etc. Welcome customers to customize the exclusive products! We are dedicated to create a global market for customers! Community of interests and win-win development!
FAQ
Q1. Can we get some samples? Any charges?
A: Yes, you can get available samples in our stock. Free Samples can be sent on your request, while freight collected.
A: Yes, you can get available samples in our stock. Free Samples can be sent on your request, while freight collected.
Q2. What about the lead time?
A: Normally sample needs 5-7days, mass production needs 15-20 working days after the order confirmed.
A: Normally sample needs 5-7days, mass production needs 15-20 working days after the order confirmed.
Q3. How do you ship the goods ?
A: We usually ship the bulk order by sea , express like DHL, Fedex are optional for sample order.
Q4. Are you a manufacturer?
Yes, we have been in glue and tape industry for more than 10 years.
Yes, we have been in glue and tape industry for more than 10 years.
Q5. How to proceed an order for glue or tape?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on product?
A: We support OEM & ODM service. Pls contact us for more details.
A: We support OEM & ODM service. Pls contact us for more details.
Q7.What's the trade term and payment term?
Generally, we accept T/T . Other terms can also be negotiable.
Generally, we accept T/T . Other terms can also be negotiable.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
