Share on (1600345998148):
used New holland agriculture tractors TD5.110 NEW HOLLAND T1104 farm tractor on import model
Deutz engine, high power, low fuel consumption, 30% torque reserve, optimal fuel consumption of 210 g/ kW •h |
12+12 synchronizer shift, 7 gears below 10km speed, to ensure fast and good operation |
Position adjustment working device, two-speed PTO(540/1000), can be equipped with 1/2/4 sets of hydraulic output and auxiliary lifting device |
Gearbox structure design is reasonable, easy to maintain. The transmission is helical and finally decelerated to planetary gear |
Cararo anti-skid front axle, using double top cylinder technology and Fiat bowl structure, the maximum Angle of 55° can be equipped with fully closed cab, spacious and bright, can be installed with cold and warm air conditioning, intake are filtered, to ensure fresh air; Reserved tea cup hole and sound box hole, seat up and down before and after adjustable, adjustable direction column Angle, so that driving agricultural machinery becomes a kind of enjoyment. |
New Holland SNH1104 tractor is the introduction of foreign technology of the latest products, the machine will be modern car design concept into the product, the main and auxiliary clutch, differential speed, front drive are all electronically controlled hydraulic operation, steering wheel operation Angle adjustable. The instrument adopts alarm device, and more humanized elements are introduced to meet the current needs of China. It is an energy-saving, environmental protection and new era model. |
1, the use of well-known Deutz diesel engine, low fuel consumption, reliable performance, pressurization power, good emissions, energy conservation and environmental protection. |
2. The transmission adopts helical teeth, good meshing, low noise, less power consumption and long service life. |
3. 12+12 synchronizer shift and handle are all set on the right side for easy operation. |
4, muffled, exhaust separated, two level balance. Cab air filtration, benzene free paint, fully embodies the concept of environmental protection. |
5, the clutch is separated from the primary and secondary operation, reducing the ground stop time in the field operation. |
6, hydraulic lifting can be optional installation of two groups of power, so that the maximum lifting force can reach 3 tons, the suspension part by 3-hole suspension adjustment and floating long groove, optional 1, 2, 4 hydraulic output, reflects the designer fully consider the concept of customers. |
7, circuit hydraulic control four wheel drive, differential lock, auxiliary clutch, easy to operate. |
Model | SNH1104 | ||
Engine Model | WP6T110E20 | Maximum tractive force(KN) | 38 |
rated power (kw) | 82 | Front tyre | 13.6-28 |
Rated speed(rpm) | 2200 | Rear tyre | 16.9-38 |
fuel consumption(g/kw·h) | ≤240 | Length(mm) | 4830 |
torque reserve(%) | ≥30% | Width(mm) | 2300 |
Gear number | 12+12 | Height to exhaust (mm) | 3100 |
maximum hoist capacity(KN) | 28.9 | minimum ground clearance(mm) | 407 |
Power output shaft speed(rpm) | 540/1000 | Structural weight(kg) | 4720 |
Linyi Yunfan Comprehensive Agricultural Development Co.,Ltd was established in year 2014.We specialize in different brands of agricultural machinery including farm tractors,combined harvesters,rice trans-planters,tractor accessories,harvester accessories and other agricultural implements.Main brands we do now contains New holland, John deere, Kubota, Massey Ferguson,Dongfeng,Iseki, Yanmar, World etc. With more than ten years of experience, we’ve been successfully shipped our goods both domestically and abroad. So far, we have 5 employees in our office and two warehouses which are totally 5000 square meters and 2000 square meters of show site.We have our own technicians to check and test each of product before loading.With the aim of intergrity, respsonsibility and efficiency, we’ll do more and best to satisfy our customers. Welcome you come to visit and contact us.
With more than ten years of experience, we can always offer and ship good and suitable products for you. 2.We’ll test each of our machines before shipping to promise quality.
Q1. What are your terms of packing?
A: Generally, we pack our goods 1pc/wooden carton,and also can according customer request
Q2. How do you ensure your quality?
We have 2 QC managers whom work on this field more than 15 years, they control the quality very carefully, our working attitude is carefully, strictly and seriously ;
Q3. What are your terms of payment?
A: T/T 50/50 for the wholesale. We'll show you the photos of the products and packages before you pay the balance.
Q4. What are your terms of delivery?
A: FOB, CIF, CNF
Q5. How about your delivery time?
A: Generally, it will take 7-15 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q6: How do you make our business long-term and a good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with each other.
New products from manufacturers at wholesale prices