Class D Mini Hi-Fi integrated amplifier digital power amplifier Blueteeth 5.0 Stereo Audio amplifier Receiver
* Small simple compact design but practical and powerful, little Hi-Fi Blueteeth wireless amplifier exclusively designed for the customers who pursue HiFi sound;
* Blueteeth 5.0 core, up to 50ft connection range guarantees low signal delay. No pop, no audible noise when Blueteeth connection is established;
* 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
* Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home;
* Home integrated digital amplifier, 12-month warranty, you can return the item if you have any problems;Use and operation
*INPUT Please disconnect the Blueteeth connection when using Blueteeth use No password is needed, find the "Uhddadi-100" device name and click connect and pair to play.
*Audio input attention This power amplifier has an energy-saving mute mode, please pay attention to the following use, otherwise it will cause no sound output Use Blueteeth or RCA INPUT, and the volume input should not be too low, otherwise it will be muted after 1 minute.
*It is recommended that the volume of the external audio source is not less than 60% Power-on precautions Plug the 24V adapter into the power supply, and plug the DC head into the product after the adapter light is on.
*Do not use other power sources for testing, which will damage the product. If the adapter light does not light, please do not connect it to this product. Damage the machine Before use, make sure that the switch is OFF and the main volume is not at the maximum position. Connect all the cables, connect the antenna, and connect the power supply. Turn the switch to ON again. At this time, the power LED lights up. Start normal use.
*This product only supports 24V DC power supply, using other power supplies may cause abnormalities BASS OR Treble can only be fine-tuned The frequency response at the maximum right twist is the original value.
*This product is only suitable for passive speakers.
Output Power 4R@100W(50W+50W,)
Terminating impedance: 4Ohm - 8Ohm
THD THD<0.4%@1KHZ 100W
Frequency Range: 20HZ~20KHZ 0DB
SNR BW:20~20K,
A-weighted:-89~-96DB
Blueteeth audio format SBC,ACC 44.1K 16BIT
Blueteeth transmission range: 40ft(12m)
Optional: With Blueteeth and RCA select (INPUT)
Input mode: Blueteeth and Analog
Input sensitivity: 500mV RMS
Power supply: DC 24V/5A
Power supply range: 24V
Package included:
1 x Blueteeth Audio Amplifier
1 x High-quality Power supply
1 x AC power cord
1 x User Manual
1 x Blueteeth Antenna
(Notice: The blueteeth antenna is placed in package slot, please check carefully.)