Горнодобывающая каменная Дробильная Мобильная Золотая Руда дробление мобильный мини каменный молоток дробильная машина тяжелое оборудование
- Category: Crusher >>>
- Supplier: Henan,Zhongke,Engineering,&,Technology,Co.,Ltd.
Share on:
Product Overview
Description
Product Show
Application of impact crusher
Impact crusher is a high-tech milling crushing machine to meet the requirements of reduced the size of stones. Impact crushers are suitable for those materials whose compressive strength is under 360Mpa, and particle size is under 500mm. .They are ideal for materials whose compressive strength is under 360Mpa and side length is under 500mm.With final products in cubic shape, impact crushers are the ideal crusher for aggregates processing in highway building, water conservancy and power construction.
Outstanding features of impact crusher
1.Simple structure, easy maintenance.
2.High capacity, high quality.
3.Crushing the ore along the joint surface , so low power consumption , high efficiency.
4.high crushing ratio, the crushing ratio can reach 40.
5.Even final particles and in cubic shape.
Working principle of impact crusher
Impact crusher is an high-efficiency crushing equipment. It uses plate hammer on the rapidly rotating rotor to generate high-speed impact to crush the materials in the crushing cavity, and casts the crushed materials along tangential direction to impact plate at the other end of the crushing cavity. The materials are crushed again, and then, they return to the plate hammer to undergo the process above repeatedly. The materials are bumping with each other when being sent between the plate hammer and the impact plate. The materials become cracked, loose and then comminuted by knocking by the plate hammer, impact with impact plate and bump between materials. The materials with grain size smaller than the gap between impact plate and plate hammer will be discharged.
The PF series Impact Crusher is new-type high efficient crushing equipment. It is a kind of new product that adopts the latest manufacturing technology, unique structural design, combining the Industrial and mining conditions of sandstone industry. This Series equipment can crush all kinds of coarse, mid, and fine material which maximum feed size is less than 500mm, compression strength is not more than 350 Mpa (like: granite, limestone, concrete etc.) with the characteristics of small volume, cubic final product, simple structure, and large ratio of reduction (up to 40), low energy consumption, large productive capacity, even product size. The Impact Crusher is widely used in the field of ore crushing, railway, highway, energy, cement, chemicals, and construction etc. The material size discharged is adjustable, with diversified crushing specification.
Working principle
The Impact Crusher is to use impact energy to crush materials. When the impact crusher works, the motor drives the rotor to rotate with high speed. When the materials get into the area which the hammers affect, under the impact function of the hammer on the rotor at a high speed, the materials are thrown to the impact device continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed, then discharged from the discharge port. Users can adjust the space between impact rack and rotor, and then get to the expected size.
Features
1. Big feeding opening, high crushing cavity, suitable for materials with high hardness, large block, and few stone powers.
2. The gap between impact plate and blow bar can be adjusted, effectively controlling the material size discharged, with good particle shape.
3. Compact structure, strong rigidity of machine, the rotor has a large rotational inertia
4. High-chromium blow bar has large impact, wear resistance.
5. The complete function of crushing, high productivity, small mechanical wear, and high comprehensive benefits.
6. No key connection, maintenance is convenient, economical and reliable.
PF Series impact crusher
Features
1.Spring 2.Impact Rack 3.Impact Rack 4.Impact Plate 5.Scaleboard 6.Blow bar 7.Rotor Rack
Type | Spe. (mm) | Feed opening size(mm) | Max feed Size (mm) | Capacity (t/h) | Power (kw) | Overall dimensions (mm) | Weight (t) |
PF-0607 | Φ644×740 | 320×770 | 100 | 10-20 | 30 | 2010x1490x2600 | 6.5 |
PF-0807 | Φ850x700 | 400x730 | 300 | 15-30 | 30-45 | 2210×1490x2670 | 8.1 |
PF-1008 | Φ1000 x800 | 400×830 | 300 | 30-50 | 37-55 | 2400x1558×2660 | 9.5 |
PF-1010 | Φ1000 x1050 | 400×1080 | 350 | 50-80 | 55-75 | 2400×2250×2620 | 12.2 |
PF-1210 | Φ1250×1050 | 400x1080 | 350 | 70-120 | 110-132 | 2690×2338×2890 | 14.9 |
PF-1212 | Φ1250×1250 | 400×1300 | 350 | 100-150 | 132-160 | 2690 x2508 ×2890 | 16.3 |
PF-1214 | Φ1250×1400 | 400× 1430 | 350 | 130-180 | 132-160 | 2690×2688 ×2890 | 18.6 |
PF-1310 | Φ1300×1050 | 490×1170 | 400 | 80-140 | 110-160 | 2780×2478×2855 | 21.2 |
PF-1315 | Φ1320×1500 | 860×1520 | 500 | 160-250 | 180-260 | 3096×3273×2667 | 24.3 |
PF-1520 | Φ1520 x 2000 | 830x2050 | 700 | 300-550 | 315-440 | 3581x3560×3265 | 36.5 |
Type | Feed opening size(mm) | Max feed Size (mm) | Output size (mm) | Adjusted size (mm) | Capacity(t/h) | Power (kw) | ||||
Cement clinker (t/h) | Limestone (t/h) | Glass sand | ||||||||
800 x 400 | 400×185 | 120 | ≤5 | 5-20 | 20-30 | 30-45 | 35-45 | 37 | ||
800 x600 | 500×250 | 180 | ≤5 | 5-20 | 35-40 | 40-55 | 45-55 | 45 | ||
800 x800 | 550×330 | 180 | ≤5 | 5-20 | 35-45 | 60-65 | 55-65 | 45 | ||
1000 x1000 | 1000×350 | 180 | ≤5 | 5-20 | 45-55 | 60-75 | 65-75 | 75 | ||
1200 ×1000 | 1200×400 | 180 | ≤5 | 5-20 | 80-110 | 80-100 | 80-100 | 90-110 | ||
1200 ×1200 | 1200×450 | 180 | ≤5 | 5-20 | 100-110 | 90-100 | 90-120 | 110-132 | ||
1400×1200 | 1500x500 | 190 | ≤5 | 5-20 | 100-150 | 100-150 | 120-150 | 160 | ||
1600 ×1400 | 1600×550 | 190 | ≤5 | 5-20 | 170-210 | 190-250 | 190-250 | 250 | ||
1800 ×1600 | 1800 x800 | 190 | ≤5 | 5-20 | 250-270 | 280-310 | 280-310 | 280 | ||
Type | Rotor diameter (mm) | Length of the rotor (mm) | The rotor rotational speed (r/min) | Motor power (kw) | A feed particle size (mm) | Granularity of the nesting (mm) | Production capacity of (limestone) (t/h) | Overall dimensions (LxW×H) (m) |
PFX1010 | Φ1000 | 1000 | 845.7 | Y280S-4-75 | ≤120 | ≤5 | 40-75 | 2.7×2.1×2.35 |
PFX1210 | Φ1200 | 1000 | 745.5 | Y28OM-4-110 | ≤150 | ≤5 | 60-100 | 3.50×2.3×2.85 |
PFX1212 | Φ1200 | 1200 | 745.5 | Y280M-4-110 | ≤150 | ≤5 | 70-120 | 3.50×2.4×2.98 |
PFX1412 | Φ1400 | 1200 | 576 | Y315M-4-132 | ≤180 | ≤5 | 90-150 | 3.53×2.4x2.98 |
Application
The Impact Crusher has such advantages as: simple in structure, large crushing ratio, low energy consumption, high output, light weight, cubic final product, and it is used for medium and fine crushing medium, fine and medium-hard materials in mineral processing, chemical, cement, construction, refractory material, ceramics, and glass etc, like: limestone, clinker, slag, carbon coke, coal etc. The PF Series Impact Crusher has larger crushing ratio, and can make full use of the high-speed impacting energy of the entire rotor. However, due to the blow bar is easily to wear, so it is restricted in hard materials. So Impact Crusher is mainly used in coarse, medium, and fine crush, such as, limestone, coal, Calcium Carbide, quartz, dolomite, sulfuration iron ore, gypsum, chemical raw material etc, under medium hard brittle material.
The Impact Crusher has such advantages as: simple in structure, large crushing ratio, low energy consumption, high output, light weight, cubic final product, and it is used for medium and fine crushing medium, fine and medium-hard materials in mineral processing, chemical, cement, construction, refractory material, ceramics, and glass etc, like: limestone, clinker, slag, carbon coke, coal etc. The PF Series Impact Crusher has larger crushing ratio, and can make full use of the high-speed impacting energy of the entire rotor. However, due to the blow bar is easily to wear, so it is restricted in hard materials. So Impact Crusher is mainly used in coarse, medium, and fine crush, such as, limestone, coal, Calcium Carbide, quartz, dolomite, sulfuration iron ore, gypsum, chemical raw material etc, under medium hard brittle material.
1.dolomite 2.platinum 3.Gangue 4.Calcite
1.calcium ore 2.manganese ore 3.cobalt ore 4.granite
Our Project
More products
Company Information
01.Our factory >>>
Henan Zhongke Engineering & Technology Co.,Ltd. is specialized in large and medium-sized series of mining machinery, metallurgical machinery, building materials equipments, cement equipment and rotary kiln. R&D, production and marketing into a joint-stock enterprise, our company is headquartered in Zhengzhou Country’s High-tech Industrial Development Zone, which consists of three branches, a research and development department.
Since the establishment of our company, always adopt advanced modern management system, and focused on innovation, has brought together a number of scientific and technological elite, our company develop very fast we have over 500 employees, 29 senior engineers and more than 100 middling technicians. We have a good long-term cooperation with domestic scientific research units, have introduced advanced technology and testing system at home and abroad.
Our company pays more attention to basic managements, we constantly improve and perfect the quality management system to ensure to provide high-quality products, work site achieve fixation management, logistic achieve ABC management; our office achieve computer automatization; production technology adopt computer management; product development process design using CAD,CAPP, PROE technology. We have completed ISO9001-2000 quality certification.
Our company constantly insist on the development of new products and development investment funds for technological renovation to meet with different requirements from different countries. Our products are very popular in Africa, South America and Southeast Asia.
02.Production Process >>>
With advanced machining equipment, we will offer a most suitable machine for you.
1.Steel Preparing 2.Steel Cutting 3.Lathe Processing 4.Casting 5.Boring machine Processing
6.Assembing 7.Testing 8.Impact crusher
06.Our service >>>
Service---customers is the first!
We not only have experienced engineers and after-sales groups,but deal with the trade through internet and form our own sales network.
1. Pre-sale services:
Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.
1>. Select equipment model;
2>. Design and manufacture products according to clients' special requirement;
3>. Train technical personnel for clients.
2. Services during the sale:
Respect clients, devote ourselves to improving the total value of clients.
1>. Pre-check and accept products ahead of delivery;
2>. Help clients to draft solving plans.
3. After-sale services:
Provide considerate services to minimize clients' worries.
1>. Assist clients to prepare for the first construction scheme;
1>. Assist clients to prepare for the first construction scheme;
2>. Install and debug the equipment;
3>. Train the first-line operators;
4>. Examine the equipment;
5>. Take initiative to eliminate the troubles rapidly;
6>. Provide perfect service;
7>. Provide technical exchanges.
Packaging & Shipping
Packaging Details:We will make different packaging according to different machine sizes .standard international export packing, container, wooden box.
Delivery Time:We will customize according to the actual needs of customers. Senior designers start to design the plan. After receiving the deposit, we will complete the delivery within 20 to 30 working days.
Our factory is capable of shipping large machine even more than 100 tons
FAQ
Q1: How long is the warranty of the Impact Crusher?
A2: Yes. We warmly welcome you to visit our factory.
We will take you to our customer site to have a real look.
We will arrange a car to pick you up at the Xinzheng International Airport.
A3:Yes. We can send professional engineers to the working site for installation, adjustment, and operation training. All of our engineers have passports.
A1: Our warranty period is one year generally.
Q2: Can I visit your factory?
A2: Yes. We warmly welcome you to visit our factory.
We will take you to our customer site to have a real look.
We will arrange a car to pick you up at the Xinzheng International Airport.
Q3: Do you provide equipment operation training?
A3:Yes. We can send professional engineers to the working site for installation, adjustment, and operation training. All of our engineers have passports.
Q4: Do you provide flow chart?
A4: Yes. Our experienced engineers are specialized in designing process flow for various project for different final product sizes.
Q5: Can you test our samples?
A5: Yes. You can send your samples to us for test and analysis.
