1. GeneralThe NC7 series AC contactor (hereinafter referred to as “contactor”) is mainly used in the circuit with an alternating current of 50Hz (or 60Hz), rated operational voltage up to 690V, and rated operational current up to 620A under the usage category of AC-3/400V; this contactor is mainly used for remotely closing and breaking circuits, and can be combined with an appropriate thermal overload relay to form a electromagnetic starter so as to protect the circuits likely to be overloaded in operation; the contactor is well suited for frequently starting and controlling AC motors.
Standard: IEC60947-4-1
2. Operating conditions
2.1 Ambient air temperature:-5℃~+40℃, its mean value not greater than +35℃ within 24 hours.
2.2 Atmospheric conditions: When the maximum temperature is +40℃, the relative humidity of the air shall not be higher than 50%; a higher relative humidity is allowed at a lower temperature, e.g., up to 90% at 20℃. Special measures shall be taken for the condensation occasionally produced due to temperature change.
2.3 Altitude: not higher than 2000m.
2.4 Pollution grade: 3
2.5 Installation classification: Ⅲ
2.6 Installation condition: the installing surface shall be inclined at not greater than ±5°to the vertical.
2.7 Impact vibration: The product shall be installed in the place free of remarkable shake, impact and vibration.