Privacy Window Tint Glass Switchable Electric PDLC Smart Film for Glass
US $78.00-$149.00
Window Film Heat Insulation One Way Mirror Self Adhesive Solar Anti uv Building Film Window Solar Film
- Category: Decorative Films >>>
- Supplier: Shanghai Qijiao Trading Co. Ltd.
Share on (1600375152134):
Product Overview
Description
Model | HT50/HT25/HT10 | VLT | 13%, 28%, 59% |
Product name | Heat control window film | UVR | ≥99% |
Color | Silver gray/Silver | IRR | 90%, 79%, 60% |
Thickness | 2mil | TSER | 84.3%, 66.6%, 46.2% |
Feature | Heat control and self-adhesive | Material | PET |
HEAT CONTROL – Besides blocking infrared rays and UV rays, our black window film are very effective at controlling excess heat and glare, also does well in protecting the home furnishing from fading. The heat control window film can retain heat in winter and keep it out in summer, reducing expensive heating and cooling costs.
APPLICABLE SCOPE – ONLY apply this film on on single panes of glass, or on modern double glazed units made of toughened glass. The glass must be smooth and flat.
EXPLOSION-PROOF – Comes with adhesive, effective explosion-proof, to prevent damage and property loss caused by broken glass and splashing. With soapy water and scraper, it is easy to install and not easy to blisters.
DAYTIME PRIVACY PROTECTION – The one-way window film provides great privacy during daytime only and outside glass shows mirror effect. As the outside light becomes weaker, the mirror effect of outside glass will disappear gradually and outside people can see inside . When the inside light is stronger than outside, the mirror effect will be reversed. Remember to draw curtain during night. Attention about window film privacy, there's different privacy effect between daytime and night.
APPLICABLE SCOPE – ONLY apply this film on on single panes of glass, or on modern double glazed units made of toughened glass. The glass must be smooth and flat.
EXPLOSION-PROOF – Comes with adhesive, effective explosion-proof, to prevent damage and property loss caused by broken glass and splashing. With soapy water and scraper, it is easy to install and not easy to blisters.
DAYTIME PRIVACY PROTECTION – The one-way window film provides great privacy during daytime only and outside glass shows mirror effect. As the outside light becomes weaker, the mirror effect of outside glass will disappear gradually and outside people can see inside . When the inside light is stronger than outside, the mirror effect will be reversed. Remember to draw curtain during night. Attention about window film privacy, there's different privacy effect between daytime and night.
●Heat control
Avoid the huge heat and harmful ultraviolet rays generated by direct sunlight to prevent damage to human skin and accelerate aging.●One way privacy
Due to the role of light, this window film has a good privacy effect during the day, and the exterior wall glass presents a mirror effect.
●Explosion-proof
The film comes with glue to prevent the glass from breaking and splashing in the event of an accident.
It can be applied to the following scenarios:
8 STEPS OF THE INSTALLATION:
Step 1: Tool preparation
The ratio of soap and water: mix tap water and detergent and spray it on your fingers. Rub your fingers for a slippery feel.
The ratio of soap and water: mix tap water and detergent and spray it on your fingers. Rub your fingers for a slippery feel.
Step 2: Cleaning the glass
This step is very important and can be cleaned several times. The hard-to-remove particles on the glass can be scraped off with a utility knife.
This step is very important and can be cleaned several times. The hard-to-remove particles on the glass can be scraped off with a utility knife.
Step 3:. Large area spray
After cleaning the glass, spray a large area of water on the glass.
After cleaning the glass, spray a large area of water on the glass.
Step 4: Tear the film
Tear off one layer of the transparent protective film, you can use your fingers to rub it, or you can tear off the adhesive tape on both sides of the film. Spray water while tearing it apart to prevent the films from sticking together.
Tear off one layer of the transparent protective film, you can use your fingers to rub it, or you can tear off the adhesive tape on both sides of the film. Spray water while tearing it apart to prevent the films from sticking together.
Step 5: Install the membrane
Align the whole, leave the extra film on the edge temporarily.
Align the whole, leave the extra film on the edge temporarily.
Step 6: Scrape out the moisture
Spray soapy water on the surface of the film, it is easy to scratch and will not damage the film.
Small glass can be wiped from left to right, do not scrape up and down, left and right at will;
The large glass should be wiped from the middle to both sides, even and not easy to blisters.
Spray soapy water on the surface of the film, it is easy to scratch and will not damage the film.
Small glass can be wiped from left to right, do not scrape up and down, left and right at will;
The large glass should be wiped from the middle to both sides, even and not easy to blisters.
Step 7: Cut off the edges
The utility knife is against the scraper and cut off the excess part
The utility knife is against the scraper and cut off the excess part
Step 8: Scrape the film again
Use a scraper to wipe hard, you can use a soft towel to wrap the scraper to wipe.
Use a scraper to wipe hard, you can use a soft towel to wrap the scraper to wipe.
Shanghai Qijiao Trading Co., Ltd. is a professional manufactuer engaged in the production and wholesale of auto products. It was established in Shanghai in 2005. The company mainly produces automotive supplies, furniture supplies, window films, car films, garden facilities and equipment supplies.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
