Insulation Class H Wall Hung Gas Boiler Circulation Pump Electric Water Boiler Circulation Pump
- Category: >>>
- Supplier: Zhejiang Chenjie Pump Industry Co. Ltd.
Share on (1600390201804):
Product Overview
Description
Insulation Class H Wall Hung Gas Boiler Circulation Pump Electric Water Boiler Circulation Pump |
Model | V/Hz | Pos | Q(m3/h) | H(m) | P(W) | I(A) |
GBP15-40S/Z107 | 230/50 | III | 2 | 4 | 65 | 0.33 |
II | 1.5 | 3.5 | 50 | 0.25 | ||
I | 1 | 2.5 | 32 | 0.18 | ||
GBP15-50S/Z107 | 230/50 | III | 2.2 | 5 | 85 | 0.42 |
II | 2 | 4 | 60 | 0.33 | ||
I | 1 | 2.5 | 40 | 0.20 | ||
GBP15-60S/Z107 | 230/50 | III | 2.5 | 5.7 | 100 | 0.45 |
II | 2 | 4.5 | 75 | 0.33 | ||
I | 1.2 | 3 | 55 | 0.20 | ||
GBP15-70S/Z107 | 230/50 | III | 2.5 | 6.5 | 130 | 0.60 |
II | 2 | 5 | 110 | 0.50 | ||
I | 1.2 | 3.5 | 90 | 0.40 |
GBP-Z107 Wall Hung Gas Boiler Circulation Pumps
INSTALLATIONS AND USE
The pumps are assembled in the hydraulic module of the gas wall hung boiler for heating and cooling system. An integrated air venting system of the pump can automatically deposits the air out of the water.
The pump is of the wet -rotor type. The bearings are lubricated by the pumped liquid.The pump is combined by stator, rotor, shield cover, air vent valve and so on.
The pump is suitable for the pumping of clean, non-corrosive and non-explosive liquids without any solid particles or fibers. The pump must not be used for the transfer of inflammable liquids such diesel oil, petrol or similar liquids.
PERFORMANCE RANGE
Flow rate up to 2.5m3/h
Head up to 7m
OPERATING CONDITIONS
Liquid temperature up to +20 ~ +85ºC
Ambient temperature up to +40ºC
Sound pressure ≤42 Db(A)
Ambient humidity:<95%
Max. System pressure 3bar
To avoid NHP damage to the bearing of the pump, Minimum inlet pressure must be kept as below
Liquid temperature 85ºC 90ºC 95ºC
Inlet pressure 0.05bar 0.28bar 0.6bar
0.5m head 2.8m head 6m head
ELECTRIC MOTOR
Two- pole induction motor, 50HZ
Standard voltage 1x220V-240V
Motor with built-in thermal protector
Dry running mustn’t be more than 10S
Insulation class H
Protection IP42
INSTALLATIONS AND USE
The pumps are assembled in the hydraulic module of the gas wall hung boiler for heating and cooling system. An integrated air venting system of the pump can automatically deposits the air out of the water.
The pump is of the wet -rotor type. The bearings are lubricated by the pumped liquid.The pump is combined by stator, rotor, shield cover, air vent valve and so on.
The pump is suitable for the pumping of clean, non-corrosive and non-explosive liquids without any solid particles or fibers. The pump must not be used for the transfer of inflammable liquids such diesel oil, petrol or similar liquids.
PERFORMANCE RANGE
Flow rate up to 2.5m3/h
Head up to 7m
OPERATING CONDITIONS
Liquid temperature up to +20 ~ +85ºC
Ambient temperature up to +40ºC
Sound pressure ≤42 Db(A)
Ambient humidity:<95%
Max. System pressure 3bar
To avoid NHP damage to the bearing of the pump, Minimum inlet pressure must be kept as below
Liquid temperature 85ºC 90ºC 95ºC
Inlet pressure 0.05bar 0.28bar 0.6bar
0.5m head 2.8m head 6m head
ELECTRIC MOTOR
Two- pole induction motor, 50HZ
Standard voltage 1x220V-240V
Motor with built-in thermal protector
Dry running mustn’t be more than 10S
Insulation class H
Protection IP42
Q1. Can I buy one as sample? How long?
A:Yes, of course, we supply samples. We need 10 days to prepare the samples.
Q2. How can I get the quotation?
A:Leave us message with your purchase requirements and we will reply you within one hour in
working time. And you may contact us directly by Whatsapp +86-18658658687.
Q3. Is OEM acceptable?
A:Yes, we accept OEM.
Q4. What’s the warranty?
A:We give 18 months warranty for wassermann standard pumps, from the date the container arrives
The destination port .
Q5. How can i claim the warranty if any faulty pumps?
A:We give 0.5% invoice amount of the free spare parts in each shipment.
The faulty pumps with coil burnt, we will send you new pumps to replace, they are for free.
You can ask for free spare parts to repair the faulty pumps.
Q6. What’s the payment term?
A:30% before the production, the rest paid against the BL copy OR LC at sight. OA is not acceptable.
Q7. How long can you finish the production?
A:20-30 days depends on different pumps.
Q8. Where is your factory? Can i visit you?
A:Yes, sure, welcome! We are in Wenling city, Taizhou, Zhejiang
A:Yes, of course, we supply samples. We need 10 days to prepare the samples.
Q2. How can I get the quotation?
A:Leave us message with your purchase requirements and we will reply you within one hour in
working time. And you may contact us directly by Whatsapp +86-18658658687.
Q3. Is OEM acceptable?
A:Yes, we accept OEM.
Q4. What’s the warranty?
A:We give 18 months warranty for wassermann standard pumps, from the date the container arrives
The destination port .
Q5. How can i claim the warranty if any faulty pumps?
A:We give 0.5% invoice amount of the free spare parts in each shipment.
The faulty pumps with coil burnt, we will send you new pumps to replace, they are for free.
You can ask for free spare parts to repair the faulty pumps.
Q6. What’s the payment term?
A:30% before the production, the rest paid against the BL copy OR LC at sight. OA is not acceptable.
Q7. How long can you finish the production?
A:20-30 days depends on different pumps.
Q8. Where is your factory? Can i visit you?
A:Yes, sure, welcome! We are in Wenling city, Taizhou, Zhejiang
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
