2 Port Input 48V 24V Passive 1/100/1000/100 5v 12v 19v and injector 2A POE Splitter 12V

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices

Application:

for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-Link, Ovislink, Senao, Wline, RouterBOARD, WRAP boards and other devices using passive POE injection.

The PoE Injector fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PDs (Powered Devices) and PoE Splitter, to expand your network to where you wish to place PDs but has no power outlet. PDs include but are not limited to Access Point, IP Camera, VoIP Phones.

How It Works
(1) For 802.3af compliant Powered Devices
On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a Powered Device such as an access point, VoIP phone, or a PoE camera.

(2) For Non-PoE Devices
On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a splitter, and then to a non-PoE device.

Specifications
2 10/100M Ethernet ports
15.4W power output
Deliver power up to about 328.1 feet(100 meters)
Support 100-240V voltage input