For five flavors soft serve ice cream machine reducer, gear box
US $99.00-$118.00
Metal Scrap Chopper Knives Scrap Chopper Blades Metal cutting blade
- Category: Metal & Metallurgy Machinery Parts >>>
- Supplier: Nanjing Ld Machine Knife Manufacturing Co. Ltd.
Share on (1600398657172):
Product Overview
Description
Brand
Standing at the junction of history and future, there’re Wright brothers invented and produced airplanes in the past.Today,Nanjing SKS brothers research, produce and develop the best mechanical blade from the last century. Time will take away many memories,Only inheritance is constant ...
Product information
Scrap Chopper Knives are knives that cut off discs and cut waste edges into pieces in operation.
Scrap Chopper Blades are widely used in coil slitting lines of CRS, Thicker Sheet, Stainless Steel, Aluminium Steel etc. After slitting, leftover strip at two sides will be chopped by scarp chopper blades for further recycling use.
Scrap Chopper Blades are widely used in coil slitting lines of CRS, Thicker Sheet, Stainless Steel, Aluminium Steel etc. After slitting, leftover strip at two sides will be chopped by scarp chopper blades for further recycling use.
Scrap Chopper Bladesare widely used
In coil slitting lines of CRS, Thicker Sheet, Stainless Steel, Aluminium Steel etc. After slitting, leftover strip at two sides will be chopped by scarp chopper blades for further recycling use.
Heat treatment process
The service life of composite hot shear blade developed by SKS is 3-5 times longer than
that of integral alloy tool steel, and the blade can be pre-protected and repaired.
All sizes/materials can be customized | ||||||||||||
Material | C | Mn | V | Si | Cr | Mo | ||||||
6CrW2Si | 1.00 | 0.60 | 0.20 | ≤0.30 | 5.35 | 1.10 | ||||||
H13 | 0.32~0.45 | 0.20~0.50 | 0.80~1.20 | 0.80~1.20 | 4.75~5.50 | 1.10 | ||||||
3cr2w8v | 0.30~0.40 | 0.40 | 0.20~0.50 | 0.40 | 2.20~2.70 | |||||||
HMB | 0.13~0.19 | 1.20~1.60 | 0.20~0.60 | 0.30 | ||||||||
Quality How to guarantee?
1. Material selection
There are many materials for customized products, such as high-quality materials such as high-speed steel, alloy steel, tungsten steel, high-carbon steel, etc. We do not choose the most expensive, but only choose the most suitable material for you.
2. Heat treatment
The uniform heating can ensure the stability of the tool and make the tool play a very good effect. We recommend the most suitable hardness to our customers, and we can achieve the largest hardness on the market if customers need.
3. Accurate size
CNC machinery can ensure the accuracy of the blade size, and the product accuracy deviation is within +0.003mm. At the same time, we can also achieve the longest and thickest blade on the market.
4. Polished
The surface of the blade is polished, oiled, and finely ground with loose perfume sandpaper, which can reduce the number of sharpening times and increase the service life.
5. Strict inspection
Each product undergoes strict quality inspection before leaving the factory. Ensure that every process is perfect.
Packing & Shipping
1, PE film or Kraft paper in anti-rust oil - keep air/water/humid away, thus rust-proofing.
2, Bubble film- increases the impact resistance ability.
3, Rubber Slip or Corrugated Angle - gives special care to knife edges.
4, Wood Screws crates - makes opening easier without damaging the crates
5, Corrugated boxes or plywood case - provide superior protection and stack-ability
2, Bubble film- increases the impact resistance ability.
3, Rubber Slip or Corrugated Angle - gives special care to knife edges.
4, Wood Screws crates - makes opening easier without damaging the crates
5, Corrugated boxes or plywood case - provide superior protection and stack-ability
Company Profile
The company occupies an area of 6,600 square meters, equipped with various process workshops and production areas. The factory has more than 100 production equipment including CNC machining centers, and has 10 heat treatment and material testing technicians. We have passed ISO9001, CE and SGS certification, and strictly abide by international quality standards.
Our factory has strong non-standard production ability, and we can make tailor-made according to customers' drawings and samples. Products are widely used in steel, paper, wood, plastic, rubber, textile and packaging industries. Since the company exported to the United States in 2008, it has been exported to dozens of countries including Indonesia, India, Japan, the Philippines, Malaysia, the United Kingdom, Italy, Turkey, Russia, and Mauritius. At the same time, the company's customer base includes well-known domestic and foreign companies, domestic and foreign OEM manufacturers, foreign tool dealers and even tool manufacturers.
Our factory has strong non-standard production ability, and we can make tailor-made according to customers' drawings and samples. Products are widely used in steel, paper, wood, plastic, rubber, textile and packaging industries. Since the company exported to the United States in 2008, it has been exported to dozens of countries including Indonesia, India, Japan, the Philippines, Malaysia, the United Kingdom, Italy, Turkey, Russia, and Mauritius. At the same time, the company's customer base includes well-known domestic and foreign companies, domestic and foreign OEM manufacturers, foreign tool dealers and even tool manufacturers.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
