Share on (1600417127825):




Specification | Shell | Capacity(t/h) | Motor | Reducer | Weight(t/m) | ||||||
I.D | Slope(°) | Speed (r/min) | Model | Power | |||||||
WSH12 | 1200 | 2.5 | 6.5 | 2.5-3 | Y160M-6 | 7.5 | ZQ500 | 13/12 | |||
WSH15 | 1500 | 2.5 | 5.0 | 4-5 | Y180L-6 | 15 | ZQ650 | 20/14 | |||
WSH18 | 1800 | 2.5 | 4.5 | 6-8 | Y200L1-6 | 18.5 | ZQ650 | 30/18 | |||
WSH20 | 2000 | 2.5 | 4.86 | 7-10 | Y200L2-6 | 22 | ZQ650 | 42/20 | |||
WSH22 | 2200 | 2.5 | 3.9 | 9-11 | Y250M-6 | 37 | ZQ750 | 48/22 | |||
WSH24 | 240 | 2.5 | 3.69 | 14-16 | Y280S-6 | 45 | ZQ850 | 69/24 | |||
WSH26 | 2600 | 2.5 | 3.48 | 16-18 | Y280M-6 | 55 | ZQ1000 | 84/26 | |||
WSH28 | 2800 | 2.5 | 2.89 | 20-22 | Y315S-6 | 785 | ZL115 | 100/28 | |||
WSH30 | 3000 | 2.5 | 2.69 | 22-24 | Y315L1-6 | 110 | ZL130 | 130/28 | |||
WSH32 | 3200 | 2.5 | 2.6 | 24-26 | Y315M-4 | 132 | ZSY450 | 138/25 | |||
WSH34 | 3400 | 2.5 | 4.0 | 26-28 | Y315L2-4 | 200 | ZI130 | 158/25 | |||
WSH41 | 4100 | 2.5 | 2.09 | 40-45 | YKK4003-4 | 315 | ZSY630 | 240/34 | |||




The wet materials are sent into silo by belt conveyor and bucket conveyor, then, the material pass through the feeding tube into the feed end. The gradient of feeding tube must be greater than the natural angle of materials. So that the material can enter into desiccator. The desiccators’ cylinder is an oblique rotating drum. Heat-carrier that enters into the dryer fror, the lower-end can form reflux with the material added from the upper end. With the rotating of cylinder materials are carried to the bottom end by gravity.In the moving process. Wet materials obtain the heat carrier directly and indirectly to be dried. Then the finished materials are sent out by belt conveyor and screw conveyor.









New products from manufacturers at wholesale prices