Factory Directly Sale 8In 20CM Maximum Sealing Length PFS 200 Plastic Sealing Machine Heat Sealer
- Category: >>>
- Supplier: Henan Grimmsky Machinery And Electric Equipment Co. Ltd.
Share on (1600418230816):
Product Overview
Description
8in=20cm Hand Impulse Electric Heat Sealing Machine
Product Overview
Features
1. Simple modeling, small volume, large capacity, very convenient to use.
2. High temperature glue bar, durable.
3. Full automatic high temperature seal.
4. The operation is simple, the super strong hand pressure seal is fresh, and the seal can be sealed 50 times per minute, which can extend the storage period of 5 times.
5. This type of sealing machine is necessary for families, shops, restaurants, hotels, hospitals, banks and other high-end establishments.
2. High temperature glue bar, durable.
3. Full automatic high temperature seal.
4. The operation is simple, the super strong hand pressure seal is fresh, and the seal can be sealed 50 times per minute, which can extend the storage period of 5 times.
5. This type of sealing machine is necessary for families, shops, restaurants, hotels, hospitals, banks and other high-end establishments.
Product Description
Model | PFS-100 | PFS-200 | PFS-300 | PFS-400 |
Material | ABS plastic + Iron | ABS plastic + Iron | ABS plastic + Iron | ABS plastic + Iron |
Voltage | 220V, 50HZ / 240V, 60HZ | 220V, 50HZ / 240V, 60HZ | 220V, 50HZ / 240V, 60HZ | 220V, 50HZ / 240V, 60HZ |
Pulse Power | 150W | 200W | 350W | 450W |
Maximum Sealing Length | 4inch=100mm | 8inch=200mm | 12inch=300mm | 16inch=400mm |
Maximum Bag Sealing Thickness | 0.45mm | 0.45mm | 0.45mm | 0.45mm |
Maximum Interface Width | 2mm | 2mm | 2mm | 3mm |
Heat Gear | 8 Gears Adjustment | 8 Gears Adjustment | 8 Gears Adjustment | 8 Gears Adjustment |
Heating Time | 0.2-1.5s | 0.2-1.5s | 0.2-1.5s | 0.2-1.5s |
Film thickness | PE 0.06-0.2mm / PP 0.03-0.08mm | PE 0.06-0.2mm / PP 0.03-0.08mm | PE 0.06-0.2mm / PP 0.03-0.08mm | PE 0.06-0.2mm / PP 0.03-0.08mm |
Welding Time | Infinitely adjustable | Infinitely adjustable | Infinitely adjustable | Infinitely adjustable |
Size | 23*7*10cm | 33*9.7*17.1cm | 40*8.5*18cm | 55*8.5*18cm |
Net Weight | 1.1kg | 1.35kg | 1.82kg | 2.85kg |
Details Images
How To Use
1.The hand-pressed plastic bag sealer does not use power switch (automatic control). Plug the ac power cord into the socket and adjust the heating time according to the thickness of the material to be sealed. Put the plastic bag on the sealing surface, then press the handle, the circuit will automatically control the heating time. When the indicator light is off, the power supply is automatically disconnected. About 1-2 seconds later, release the handle and seal.
3. If the seal is not tight, it is because the heating time is too short. Please turn the knob clockwise to extend the heating time.
4. If the plastic bag is stuck on the rubber press plate, it indicates that the cooling time is not enough. The cooling time after the indicator light is put out must be extended. Please release the handle a little later.
5. After the heating time is adjusted, it shall remain unchanged in use, and no further adjustment shall be made in continuous use.
6. The manual pressure plastic bag sealer can insert the AC power cord into the power socket at any time, without sealing and without power consumption.
2. The seal of each letter is damaged when it is received. That is because the heating time is too long. Please turn the knob counterclockwise to shorten the heating time.
3. If the seal is not tight, it is because the heating time is too short. Please turn the knob clockwise to extend the heating time.
4. If the plastic bag is stuck on the rubber press plate, it indicates that the cooling time is not enough. The cooling time after the indicator light is put out must be extended. Please release the handle a little later.
5. After the heating time is adjusted, it shall remain unchanged in use, and no further adjustment shall be made in continuous use.
6. The manual pressure plastic bag sealer can insert the AC power cord into the power socket at any time, without sealing and without power consumption.
Factory Workshop Showing
Packing ＆ Shipping Showing
FAQ
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods by plywood boxes, Pallets, Cartons.
Q2. What is your terms of payment?
A: T/T 50% as deposit, and 50% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. How about your delivery time?
A: Generally, it will take 15 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q5: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
