Q1: Press the power switch, but the machine does not light up
A1: Check if the power cord is plugged in tightly
Q2: The temperature does not rise
A2: Check if the coaster plug is inserted tightly
Q3: Press the pressure handle, but the machine does not count down
A3: Wait for the machine to heat up to the set temperature, then press down the handle
Q4: The edge of the transfer is blurred
A4: Increase the pressure appropriately and extend the time
Q5: Pressing the start button can not enter the working interface
A5: Touch the screen and see that the start button is flashing, and you can enter the working interface after a few seconds
Advices of the failed transfer:
A.The color is too light:the temperature is too low or the pressure is uneven,or the time is too short.
B.The image blurry:over time leads to ink diffusion
C.The image lackluster:excessive pressure or over temperature
D.Part of the image blurry:uneven distribution of the heating area
E.The image has nicks: the heating time is too long
F.The image variegation: the pressure is uneven or the goods coating is uneven
G.Paper sticks on the goods:over temperature or the goods coating problem