Cold Cup PLA Dome Lid with Straw Hole
- Category: >>>
- Supplier: Jiangyin Film-Maker Plastic Co. Ltd.
Share on (1600430638450):
Product Overview
Description
Cold Cup PLA Dome Lid with Straw Hole
Product Introduction
What is PLA?
Polylactic acid, also known as polylactide, belongs to the polyester family. Polylactic acid is a polymer obtained by polymerizing lactic acid as a main raw material. the raw material source is sufficient and can be regenerated, corn, cassava and the like are mainly used as raw materials. The production process of polylactic acid is non-polluting, and the product can be biodegraded to achieve circulation in nature, so it is an ideal green polymer material.
PLA products can withstand a temperature range of -25℃ to 125℃, Need to be stored under normal temperature and dry conditions.
PLA Cup Lids
PLA cup lids is healthy,nontoxic,harmless and sanitary.
Appliable in microwave,oven and refrigerator.
Biodegradable,compostable and eco-friendly.
Customized is acceptable,we can print customers' logo,comapny name,brand and other information on the cups.
Any cup mould can be made in our factory.
Cups or lids can be packed in PLA bag. Not only products can be 100% biodegradable, but also the packing material can be 100% biodegradable.
PLA Cup Products Series
Item#--JO01
Material: PLA
TopØ/BottomØ: 24/90mm
Height: 42mm
single weight: 2.7g±0.2g
G.W/ctn: 3.5kg
Packing: 1000 pcs per carton
Carton size: 48*19.5*42.5cm
Item#--JO02
Material: PLA
TopØ/BottomØ: 29/105mm
Height: 44mm
single weight: 3.9g±0.2g
G.W/ctn: 2.53kg
Packing: 500 pcs per carton
Carton size: 55.3*12.3*43.8cm
Raw Material PLA Sheet Technical Data Sheet
Raw Material PLA Sheet Technical Data Sheet
Propety | Typical Value | Test Method |
Melting point | 145-155℃ | ISO 1218 |
GTT(glass-transition temperature) | 35-45℃ | ISO 1218 |
Distortion Temperature | 30-45℃ | ISO 75 |
MFR(melt flow rate) | 140℃ 10-30g/10min | ISO 1133 |
Crystallization Temperature | 80-120℃ | ISO 11357-3 |
Tensile Strength | 20-35Mpa | ISO 527-2 |
Shock Strength | 5-15kjm-2 | ISO 180 |
Weight-average Molecular Weight | 100000-150000 | GPC |
Density | 1.25g/cm3 | ISO 1183 |
Decomposition Temperature | 240℃ | TGA |
Solubleness | Insoluble in water, soluble in hot lye | |
Moisture Content | ≤0.5% | ISO 585 |
Degradation Property | 95D decompositionrate is 70.2% | GB/T 19277-2003 |
Packaging & Shipping
Packaging
Our package is careful enough to avoid the damage of products.
Our package is strong enough to withstand bumping and rough handling during the long-distance transportation over the sea.
- We have stick stamp about product details on each pallet.
Company Information
Our Company
- We are a specialized manufacturer of PLA/PETG/PET sheet and PLA disposable products.
- we are manufacturing and converting different films such as PVC&PET-G Shrink Film,PE protective film.
- Our vision today is to maintain our position as one of the leading manufacturers.
Factory Overview
Certifications
Certifications
FAQ
FAQ
1.Why PLA is also called "Corn plastic"?
As PLA is derived from natural, renewable starch rich crop such as corn, potato.
2.How does PLA decompose?
Under compost condition PLA will decompose into lactic acid when polymers are broken down. Lactic acid will decompose into water and carbon dioxide by bacteria.
3.How long dose it take for PLA to decompose?
It will take 90-180days under compost condition according to different size and thickness of the products.
4.What is compost condition?
Compost condition refers to the co-existence of three key elements:
1). High temperature(58-70ºC)
2). High humidity.
3). Bacteria must co-exist
5.Will PLA products start decompose under normal temperature?
No, it will not. Same as the petroleum-based plastic products, PLA products can be used under normal condition. However, as PLA is not heat-resistant. It is recommended to be used under the temperature of 50ºC.
6.Any special precaution for PLA storage and delivery?
1).Storage: Dry, ventilated and cool environment with optimal temperature under 40ºC.
2). Delivery. Prevent from direct sunshine and pressing, use strong carton box, control temperature during container load by applying insulated materials.
7.Can our existing machine and molds for petroleum-based plastic products produce PLA products?
Yes. Machine and molds for petroleum-based plastic products can produce PLA products by adjusting the mold temperature and relevant production techniques as per the characteristics of PLA.
8.Which areas shall we pay attention during the production of PLA products?
1). Temperature
2). Pressure
3). Moisture content of the material
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
