Plastic board water soulable putty chemical concrete superplasticizer polycarboxylates
- Category: >>>
- Supplier: Fujian Cinna Science And Technology Co. Ltd.
Share on (1600431936601):
Product Overview
Description
Product Description
Product introduce:
Compared with the performance of similar products from China and abroad, PC-1000 polycarboxylic acid high-performance dispersant
has reached the international advanced level in terms of technical performance indicators and cost performance.
This product is currently the best prospect, the best overall performance of a universal economic superplasticizer.
Compared with the performance of similar products from China and abroad, PC-1000 polycarboxylic acid high-performance dispersant
has reached the international advanced level in terms of technical performance indicators and cost performance.
Product Advantage
It has the advantages of low dosage,strong dispersion ability,high water reduction rate,good cement adaptability,small fluidity
loss,strong durability,ultra-low air entrainment,strong defoaming and adaptability,etc.It is a non-toxic,non-toxic and non-toxic
Corrosive,non-combustible,safe and environmentally friendly high-performance water reducing ahent.
loss,strong durability,ultra-low air entrainment,strong defoaming and adaptability,etc.It is a non-toxic,non-toxic and non-toxic
Corrosive,non-combustible,safe and environmentally friendly high-performance water reducing ahent.
This product is suitable for the preparation of various cement-based dry mortar,gypsum-based self-leveling mortar,concrete and
other products,such as grouting agent(material),self-leveling mortar,special mortar,bearing mortar,high-strength grouting
material,construction and conarete of different strength grades,etc.
other products,such as grouting agent(material),self-leveling mortar,special mortar,bearing mortar,high-strength grouting
material,construction and conarete of different strength grades,etc.
The prepared product fully meets the "Technical Specifications for Construction of highway Bridges and Culverts"(JTG/T3650-2020),
"Technical Conditions for Pipe Grouting of Post-tensioned Prestressed Concrete Beams for Railways" (TB/T3192-2008), and
"Enterprise Standards of China Railway Corporation" (Q/CR409-2017), "Cement-based grouting material application technical
specifications" (GB/T50448-2008), "Bridge support grouting material" (JT/T1130-2017), "Cement-based self-leveling mortar for
ground" ( JC/T985-2017), "Gypsum-based self-leveling mortar" (JC/T1023-2007) and other related product standards.
"Technical Conditions for Pipe Grouting of Post-tensioned Prestressed Concrete Beams for Railways" (TB/T3192-2008), and
"Enterprise Standards of China Railway Corporation" (Q/CR409-2017), "Cement-based grouting material application technical
specifications" (GB/T50448-2008), "Bridge support grouting material" (JT/T1130-2017), "Cement-based self-leveling mortar for
ground" ( JC/T985-2017), "Gypsum-based self-leveling mortar" (JC/T1023-2007) and other related product standards.
Our engineering case 1
Our engineering case 2
Our engineering case 3
Our engineering case 4
Our engineering case 5
Our engineering case 6
Precautions for use | ||
1. | The dosage of this product is 0.10-0.50% of the cementitious material. A trial test is carried out before use to find the best dosage. | |
2. | This product must not be mixed with other water reducing agents. Before using this product, the mixer that has used other water-reducing agents must be rinsed, otherwise it may affect the water-reducing effect. | |
3. | This product must not be mixed with other water reducing agents. Before using this product, the mixer that has used other water-reducing agents must be rinsed, otherwise it may affect the water-reducing effect. | |
4. | Due to the high water reduction rate of PC-1000 polycarboxylic acid high-performance dispersant, the water consumption must be strictly controlled when using it. | |
Packaging and storage | ||
1. | This product is powder, packed in paper-plastic bags, 25kg/bag. | |
2. | This product should be sealed and stored in time after opening the bag and using it. | |
3. | Store in a cool and dry place at 0-40℃ to avoid high temperature, high humidity and heavy pressure. | |
4. | The warranty period is 12 months, and the overdue products can be used only after they are tested and verified. | |
Technical Support
In the preparation of various concrete of this product, the company provides free professional technical consulting services and
provides users with formula system optimization services.
Specification
Main performance | ||
Project | Performance | |
Exterior | White powder | |
Active ingredient (%) | ≥90 | |
Bulk density (kg/m³) | 300-600 | |
PH value(10% aqueous solution) | 6.5-8.5 | |
Water reduction rate (%) | ≥25 | |
Product application examples | ||
Squeezing agent (material) products | ||
Project | Performance | |
Mixing time (1000r/min high-speed pulping machine) | 3min-5min | |
Initial liquidity (s) | 13.5 | |
30 mins fluidity (s) | 13.9 | |
30mins fluidity loss value | 0.4 | |
Water-binder ratio | 28 | |
Grouting material products | ||
Project | Performance | |
Water to material ratio (%) | 13~15 | |
Mixing time (1000r/min high-speed pulping machine) | 240s | |
Initial liquidity (s) | 345 | |
30 mins fluidity (s) | 340 | |
30mins fluidity loss value | 5 | |
Surface self-leveling products | Bearing mortar products | ||||
Project | Performance | Project | Performance | ||
Water-binder rati (%) | 24 | Water-binder rati (%) | 15 | ||
Initial liquidity (s) | 156 | Initial liquidity (s) | 360 | ||
20 mins fluidity (s) | 155 | 20 mins fluidity (s) | 354 | ||
20mins fluidity loss value | 1 | 20mins fluidity loss value | 6 | ||
Packing & Delivery
1,This product is powder, packed in paper-plastic bags, 25kg/bag.
2,This product should be sealed and stored in time after opening the bag and using it.
3,Store in a cool and dry place at 0-40C to avoid high temperature, high humidity and heavy pressure.
4,The warranty period is 12 months, and the overdue products can be used only after they are tested and verified.
2,This product should be sealed and stored in time after opening the bag and using it.
3,Store in a cool and dry place at 0-40C to avoid high temperature, high humidity and heavy pressure.
4,The warranty period is 12 months, and the overdue products can be used only after they are tested and verified.
Company Profile
Fujian Cinna Technology Co., Ltd. was established in 2015 with a registered capital of 120 million yuan. Its headquarter is located in Gangyuan Industrial Zone, Chenxiang Town, Changtai District, Zhangzhou City, Fujian Province, and has production bases in Yunnan, Guizhou, Sichuan and other places. It is a professional manufacturer of comprehensive admixtures integrating R&D, production, sales and service.
Adhering to the corporate mission of "Building Safe, Better Life", Cinna Technology has introduced advanced automated production lines at China and abroad, and the entire process is controlled by computer automation, to reached standards such as high-tech production, high-quality testing, high-efficiency operation, high-cleanliness and environmental protection.
Company has passed the management of the three certificates of ISO, and the products produced have scientific and technological content, good application equipment, high comprehensive quality, environmental protection and pollution-free, etc.,
Cinna Technology is committed to the grand vision of becoming "a global excellent supplier of engineering materials", with the service concept of "thinking, value-added, and transcendence" and the business philosophy of "respect, integrity, and innovation".
We always provide customers with high-quality admixture series products, concrete technology overall solutions and warm and thoughtful after-sales service, establish a good corporate image in the admixture industry, and also bring positive brand benefits to the company.
Adhering to the corporate mission of "Building Safe, Better Life", Cinna Technology has introduced advanced automated production lines at China and abroad, and the entire process is controlled by computer automation, to reached standards such as high-tech production, high-quality testing, high-efficiency operation, high-cleanliness and environmental protection.
Company has passed the management of the three certificates of ISO, and the products produced have scientific and technological content, good application equipment, high comprehensive quality, environmental protection and pollution-free, etc.,
Cinna Technology is committed to the grand vision of becoming "a global excellent supplier of engineering materials", with the service concept of "thinking, value-added, and transcendence" and the business philosophy of "respect, integrity, and innovation".
We always provide customers with high-quality admixture series products, concrete technology overall solutions and warm and thoughtful after-sales service, establish a good corporate image in the admixture industry, and also bring positive brand benefits to the company.
Our Factory
FAQ
Q1. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q2. What is your terms of delivery?
A: FOB, CFR, CIF,
Q3. How about your delivery time?
A: Generally, it will take 7 to 15 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q4. What is your sample policy?
A: We can supply the free sample for testing, what's more,we also pay the freight.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q6: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q2. What is your terms of delivery?
A: FOB, CFR, CIF,
Q3. How about your delivery time?
A: Generally, it will take 7 to 15 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q4. What is your sample policy?
A: We can supply the free sample for testing, what's more,we also pay the freight.
Q5. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q6: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
