High Efficiency Metal Surface Dry Ice Blasting Portable Descaling Cleaning Machine
- Category: >>>
- Supplier: Shandong Lantian Huaer Environmental Protection Equipment Co. Ltd.
Share on (1600432116312):
Product Overview
Description
Product Description
Industrial dry ice blasting clean machine/ Dry ice cleaner
Specification
Surface Cleaning dry ice blasting machine uses compressed air as power,accelerate the very low temperature -78°C of high density of dry ice particles to the speed which close to the speed of the sound, impact the dirt which on the surface of the material, cooling the surface dirt suddenly, Lead to surface embrittlement and burst. And at the same time, after the dry ice pellet into the crack of the dirt, Quickly sublimate to gas, The volume expansion nearly 800 times instantaneous, thus take the dirt from the surface of objects.
Product name | Dry ice blasting cleaning machine |
Model | JSM9000 |
Air supply flow | 0.5~4.0m³/min |
Air supply pressure | 0.1~0.85Mpa (adjustable) |
Dry ice consumption | 0~1.2kg/min |
Hopper capacity | 13kg |
Dry ice state | 3mm granular |
Power | 0.37kw |
Drive mode | Permanent magnet synchronous |
Voltage | AC220V/50~60HZ |
Size | 60*40*85cm |
Weight | 55kg |
Comparasion
Why choose dry ice cleaning?
Cleaning method | No secondary pollution | Non-conductive | Non-toxic | Non-abrasive |
Dry ice blasting | ✔ | ✔ | ✔ | ✔ |
Sand blasting | ✔ | ✔ | ||
Soda blasting | ✔ | ✔ | ||
High pressure water blasting | ✔ | ✔ | ||
Manual cleaning | ✔ | |||
Chemical solvent cleaning | ✔ |
Advantage
Compared to traditional cleaning methods,dry ice cleaning has the following advantages:
1.Saving costs
2.Dry cleaning process
3.Protect the environment
4.Extend the service life of the equipment
5.High efficiency
6.Wide range of uses
Details Images
Flat nozzle spray gun
Used for cleaning the chassis and when cleaning the engine room
Dry ice blasting nozzles
Stainless steel spray guns.
Various spary guns applicable for different cleaning areas;
Control Panel, Easy operation
Dry ice consumption adjustable
Switch between dry ice output/ air output
Dry ice injection pressure adjustment
Air source pressure gauge display
Dry ice injection pressure gauge display
Switch between dry ice output/ air output
Dry ice injection pressure adjustment
Air source pressure gauge display
Dry ice injection pressure gauge display
Control buttons and interfaces
Dry ice interface
Control cable interface for spraying dry ice
Quick connection of air source
Control cable interface for spraying dry ice
Quick connection of air source
Accessory
Accessories | ||
Aerodynamic nozzles | 4pcs | |
Control cable | 1pc | |
Switch handle | 1pc | |
Compressed air hose | 1pc | |
Dry ice blasting hose | 1pc | |
Dry ice shovel | 1pc | |
Mask | 1pc | |
Earmuffs | 1pc | |
Waterproof power cord | 1pc | |
Instructions for use and operating procedures | 1pc | |
Comparasion Of Cleaning Effect
Application
FAQ
Q1:Does it produce it own ice? Where do I get the dry ice from?
A: No,it doesn't product the dry ice.You need to buy the dry ice in the local market.
Q2: What size and form of dry ice required to use on the machine?
A: Use the 3mm particles dry ice is ok,the machine will crush the dry ice.
Q3: Any suggestion for the compressor?
A: We suggest you use 7.5KW or above screw air compressor.
The pipe diameter of the gas supply path is ≥DN15 to ensure the flow
The air compressor is away from the cleaning site ≯50m
Q4: Does the machine run on single phase?
A: No,it doesn't run on single phase.The socket must to connect with earth wire.
Q5: What will dry ice blasting NOT remove from my vehicle?
A: The process will remove almost any cosmoline, grease, oil, road debris from a vehicles undercarriage. It will NOT remove rust that has already started. It will clean surface rust. This process will also NOT remove paint from a vehicle.
Q6: Will dry ice blasting harm anything on vehicle?
Answer: No. Dry ice is a solid state form of C02 (carbon dioxide), when the ice makes contact with the surface it is cleaning it freezes the grime and the blast of air simply removes the frozen grime with the dry ice dissipating into C02 and leaving only the dirt to be swept from the floor. No harmful chemicals or degreasers needed. No water needed to be sprayed either! It is completely safe on all rubber, metal and electrical components.
A: No,it doesn't product the dry ice.You need to buy the dry ice in the local market.
Q2: What size and form of dry ice required to use on the machine?
A: Use the 3mm particles dry ice is ok,the machine will crush the dry ice.
Q3: Any suggestion for the compressor?
A: We suggest you use 7.5KW or above screw air compressor.
The pipe diameter of the gas supply path is ≥DN15 to ensure the flow
The air compressor is away from the cleaning site ≯50m
Q4: Does the machine run on single phase?
A: No,it doesn't run on single phase.The socket must to connect with earth wire.
Q5: What will dry ice blasting NOT remove from my vehicle?
A: The process will remove almost any cosmoline, grease, oil, road debris from a vehicles undercarriage. It will NOT remove rust that has already started. It will clean surface rust. This process will also NOT remove paint from a vehicle.
Q6: Will dry ice blasting harm anything on vehicle?
Answer: No. Dry ice is a solid state form of C02 (carbon dioxide), when the ice makes contact with the surface it is cleaning it freezes the grime and the blast of air simply removes the frozen grime with the dry ice dissipating into C02 and leaving only the dirt to be swept from the floor. No harmful chemicals or degreasers needed. No water needed to be sprayed either! It is completely safe on all rubber, metal and electrical components.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
