1178 Nylon 10cm/15cm Cold Room Door Inside Escape Release Handle Push Rod
- Category: >>>
- Supplier: Shanghai Minran Refrigerating Engineering Equipment Co. Ltd.
Share on (1600435432559):
Product Overview
Description
Products Description
Product Paramenters
Name | 1178 Cold Room Door Escape Push Rod | ||||||
Material | Nylon | ||||||
10cm | Suitable for door panel thickness of 10 or 7.5cm | ||||||
15cm | Suitable for door panel thickness of 15 or 12cm | ||||||
Note | The push rod can be cut by the customer according to the thickness of the door | ||||||
Remark | There may be slight errors in manual measurement of dimensions. Please do not open holes in advance. Please refer to the actual product received for details. | ||||||
Regarding screws:
The installation of screws is determined based on the customer's installation needs, as the thickness of the
installed equipment sheet is also different, the length of the screws is different, and the screws used are different. There are also metric, British, and American systems, as well as cup heads, countersunk pan heads, and ball heads, or they can be fixed with screws, nuts, or self tapping screws, which cannot be unified. Therefore, the product does not come with screws, and screws need to be self equipped. We hope that all buyers understand!
installed equipment sheet is also different, the length of the screws is different, and the screws used are different. There are also metric, British, and American systems, as well as cup heads, countersunk pan heads, and ball heads, or they can be fixed with screws, nuts, or self tapping screws, which cannot be unified. Therefore, the product does not come with screws, and screws need to be self equipped. We hope that all buyers understand!
Details Images
Production base
Application Scenario
Installation Process
1. First, confirm the installation positions of the lock handle and lock hook, and ensure that the accessories of the lock are complete.
2. Insert the lock body into the hole position in sequence, align it, and fix the screws.
3. Rotate the outer and inner handles to observe if the tongue can be smoothly retracted and extended. After fastening each assembly screw, repeat the above action and test several times. If each action is not smooth, loosen the screw, adjust the position and try again until it is appropriate.
Customer Feedback
Company Profile
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
