271 anaerobic thread locking compound adhesive glue
- Category: >>>
- Supplier: Shanghai Peida Embroidery Products Co. Ltd.
Share on (1600436404821):
Product Overview
Description
Product Description
anaerobic Adhesive .
271 is a high strength, anaerobic thread
locking compound. 271 is designed for
the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. 270 exhibits good temperature stability and is solvent resistant.
locking compound. 271 is designed for
the permanent locking of threaded fasteners. The product performs on aluminum, steel, plated fasteners, stainless steel, and special alloy parts. 270 exhibits good temperature stability and is solvent resistant.
Typical Applications
270 will lock and seal large fastener is used in applications where shock and vibration may cause the fastener to loosen.
Instructions for Use
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle onto parts.
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle onto parts.
Product Paramenters
Technical Feature
Properties of Uncured Material
Chemical Type Anaerobic
Chemical Type Anaerobic
Appearance Red
Toxicity Low
Solids 100%
Viscosity @ 25ºC, cPs
Brookfield RVT,
Spindle 3 @ 20 rpm 400-600
Brookfield RVT,
Spindle 3 @ 20 rpm 400-600
Specific Gravity 1.10
Performance of Cured Material
Typical Values
Fixture Time 15-20 min@72oF
Full Cure Time 24 hrs @ 72oF
Temperature Range -60oF to 350oF
(-51oC to 177oC)
Shear Strength
After 24 hour cure
Steel pins and collars >2500 psi
Typical Values
Fixture Time 15-20 min@72oF
Full Cure Time 24 hrs @ 72oF
Temperature Range -60oF to 350oF
(-51oC to 177oC)
Shear Strength
After 24 hour cure
Steel pins and collars >2500 psi
After 24 hr cure, 24 hrs at 177oC, tested at 22 oC Steel pins and collars >3500 psi
Presentation
Bottles…...2ml, 10ml, 50ml, 250ml and liter
Bottles…...2ml, 10ml, 50ml, 250ml and liter
Environmental and Fluid Resistance
(Shear strength values after 1000 hrs)
Typical Values
Heat age 100%
Engine oil@ 150oC 80%
Brake fluid @ 150oC 100%
ATF @ 150oC 100%
50/50 water/
ethylene glycol @ 120oC 85%
(Shear strength values after 1000 hrs)
Typical Values
Heat age 100%
Engine oil@ 150oC 80%
Brake fluid @ 150oC 100%
ATF @ 150oC 100%
50/50 water/
ethylene glycol @ 120oC 85%
Water @ 100oC 85%
Gasoline @ 25oC 100%
Diesel fuel @ 25oC 100%
Ethyl Alcohol @25oC 95%
General Information
StorageProduct should be stored in a cool and dry location at
temperatures between 14°F (-10°C) to 86°F (30°C).
Shelf life is 2 years from date of manufacture when
stored at 72±8°F (22±4°C).
Note
270 is recommended for threaded
components under 1" in diameter. Components can
be disassembled using conventional hand tools. It is
color coded blue and once cured, seals and vibration
proofs the assembly giving controlled breakaway and
prevailing torques. Product conforms to MIL-S-
46163A, ASTM D-5363, NSF.
Health & Safety in use
IRRITANT: Contains Methacrylate Esters which
may irritate eyes, respiratory organs and skin. In
case of contact with the skin, wash immediately
with plenty of water.
Manufacturing Technique
270a high strength, anaerobic thread locking compound.
Sheer strength on steel after 12 month soak
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS)
Application
Recommend Products
Packing & Delivery
271 high strength, anaerobic thread locking compound.
Spec 2ml 10ml 50ml 250ml 1L (Drums packing) Package 24pcs/ctn 24pcs/ctn 24pcs/ctn Silver Paper Bag
packing :
20GP Container Load 2200 ctns 2050 ctns 2050 ctns 72 drums High temperature silicone seal waterproof transparent silicone sealant
Delivery Time
15 -35 days upon the receipt of the down payment
Delivery Time
15 -35 days upon the receipt of the down payment
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. and it is 15-35 days if the goods are not in stock, it is also according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the free sample but exclued freight, kindly noted.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
A: We are manufacturer
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. and it is 15-35 days if the goods are not in stock, it is also according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the free sample but exclued freight, kindly noted.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
