648 medium viscosity adhesive , quick curing, high strength anaerobic retaining compound glue
- Category: >>>
- Supplier: Shanghai Peida Embroidery Products Co. Ltd.
Share on (1600441147393):
Product Overview
Description
Product Description
anaerobic Adhesive .
648 is a medium viscosity, quick curing,
high strength anaerobic retaining compound glue . 648 is used for tight-clearance, and slip-fit metal applications. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. 648 exhibits good
temperature and solvent resistant. 648
can be used to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces.
high strength anaerobic retaining compound glue . 648 is used for tight-clearance, and slip-fit metal applications. The product performs on aluminum, steel, plated, stainless steel, and special alloy parts. 648 exhibits good
temperature and solvent resistant. 648
can be used to create an air-tight seal on cylindrical assemblies. This product cures rapidly on all metal surfaces.
Typical Applications
Locks shaft and hubs together for gears,
bearing, bushings Bonds pins, adaptors, plugs
bearing, bushings Bonds pins, adaptors, plugs
Instructions for Use
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle onto parts.
Ensure parts are clean, dry and free from oil and grease.
Procedure for Application
Product is normally hand applied from the bottle onto parts.
Product Paramenters
Technical Features
Properties of Uncured Material
Chemical Type Anaerobic
Appearance Green
Toxicity Low
Solids 100%
Viscosity 450-600 cPs
Specific Gravity 1.1
Performance of Cured Material
Typical Values
Fixture Time 15-20 min@72oF
Full Cure Time 24 hrs @ 72oF
Temperature Range -60oF to 350oF
(-51oC to 177oC)
Shear Strength
After 24 hour cure
Steel pins and collars >2500 psi
Properties of Uncured Material
Chemical Type Anaerobic
Appearance Green
Toxicity Low
Solids 100%
Viscosity 450-600 cPs
Specific Gravity 1.1
Performance of Cured Material
Typical Values
Fixture Time 15-20 min@72oF
Full Cure Time 24 hrs @ 72oF
Temperature Range -60oF to 350oF
(-51oC to 177oC)
Shear Strength
After 24 hour cure
Steel pins and collars >2500 psi
After 24 hr cure, 24 hrs at 177oC, tested at 22 oC Steel pins and collars >3500 psi
Environmental and Fluid Resistance
(Shear strength values)
Typical Values
Heat age 100%
Engine oil@ 150oC 95%
Brake fluid @ 150oC 90%
ATF @ 150oC 90%
50/50 water/
ethylene glycol @ 120oC 92%
(Shear strength values)
Typical Values
Heat age 100%
Engine oil@ 150oC 95%
Brake fluid @ 150oC 90%
ATF @ 150oC 90%
50/50 water/
ethylene glycol @ 120oC 92%
Water @ 100oC 92%
Gasoline @ 25oC 100%
Diesel fuel @ 25oC 100%
Ethyl Alcohol @25oC 75%
General Information
StorageProduct should be stored in a cool and dry location at
temperatures between 14°F (-10°C) to 86°F (30°C).
Shelf life is 2 years from date of manufacture when
stored at 72±8°F (22±4°C).
Note
Where gap size is large or where the surface is
uneven, apply a Vibra-TITE primer to help cure the
product through volume. Gasket Maker can be roller
coated, screen printed or applied by pads.
Health & Safety in use
IRRITANT: Contains Methacrylate Esters which
may irritate eyes, respiratory organs and skin. In
case of contact with the skin, wash immediately
with plenty of water.
Manufacturing Technique
648 medium viscosity, quick curing,
high strength anaerobic retaining compound glue
high strength anaerobic retaining compound glue
Sheer strength on steel after 12 month soak
For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS)
Application
Recommend Products
Packing & Delivery
medium viscosity, quick curing, high strength anaerobic retaining compound gluet......... tube .50ml, 250ml and liter (bottle)
Spec 2ml 10ml 50ml 250ml 1L (Drums packing) Package 24pcs/ctn 24pcs/ctn 24pcs/ctn Silver Paper Bag
packing :
20GP Container Load 2200 ctns 2050 ctns 2050 ctns 72 drums High temperature silicone seal waterproof transparent silicone sealant
Delivery Time
15 -35 days upon the receipt of the down payment
Delivery Time
15 -35 days upon the receipt of the down payment
FAQ
Q: Are you trading company or manufacturer ?
A: We are manufacturer
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. and it is 15-35 days if the goods are not in stock, it is also according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the free sample but exclued freight, kindly noted.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
A: We are manufacturer
Q: How long is your delivery time?
A: Generally it is 5-7 days if the goods are in stock. and it is 15-35 days if the goods are not in stock, it is also according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the free sample but exclued freight, kindly noted.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
