Vortex Large Industrial Blower Fan Price In Pakistan
- Category: >>>
- Supplier: Shenzhen Xicheng Plastic Co. Ltd.
Share on (1600453534341):
Product Overview
Description
Product Description
Supporting equipment - FRP fan.
Glass fiber reinforced plastic fan refers to the material of FRP, Its appearance, size and steel fan exactly the same, but the shell and impeller for the glass fiber reinforced plastic material,The biggest feature is corrosion resistance, acid and alkali, belonging to a kind of anti-corrosion fan. We are equipped with PP fan, high efficiency fan blade, according to different circumstances and conditions, choose different fan type
1.Introduction
Pp Anti-corrosion Centrifugal Fan, the bending strength of not less than 196Mpa, each section with smooth, smooth surface, no
cracks, gaps, burrs and other defects, the overall effect is good, the fan to do static balance test, according to the "balance
precision" rigid rotor, grade G6.3 level, from the cylinder wall gap 30mm tip and the error is no more than 10mm, the fan
aerodynamic reasonable, large volume, low noise, high efficiency, corrosion resistance.
cracks, gaps, burrs and other defects, the overall effect is good, the fan to do static balance test, according to the "balance
precision" rigid rotor, grade G6.3 level, from the cylinder wall gap 30mm tip and the error is no more than 10mm, the fan
aerodynamic reasonable, large volume, low noise, high efficiency, corrosion resistance.
2.Features
* The case can also be made of cold rolling steel plate surface treatment.
* Impeller manufacturing process is as follows: suitable for office buildings, shopping malls, theaters, hospitals, factories
workshop, basements and other places where the ventilation exhaust, the delivery should be the gas does not contain viscous
substances, and the gas temperature is not greater than 80 degrees, not more than 150mg/ M3. media content quality.
* Impeller manufacturing process is as follows: suitable for office buildings, shopping malls, theaters, hospitals, factories
workshop, basements and other places where the ventilation exhaust, the delivery should be the gas does not contain viscous
substances, and the gas temperature is not greater than 80 degrees, not more than 150mg/ M3. media content quality.
Specification
Fiberglass Reinforced Plastics Fan | ||||||
Specification | Pump | Wind velocity | Wind resistance | |||
XC-FJ-3 | 1.5KW | 2000m³/h | 1145Pa | |||
XC-FJ-3.6 | 2.2KW | 4000m³/h | 1150Pa | |||
XC-FJ-5.5 | 4.0KW | 6000m³/h | 1000Pa | |||
XC-FJ-6 | 5.5KW | 8000m³/h | 1100Pa | |||
Company Profile
Our service
PERSONALIZED CUSTOMIZATION
The products can be customized according to customers' requirments and drawings.
INSTALLATION
Our company can send professional engineers to guide device installation and provide a professional plan.
AFTER SERVICE
Our equipment will have a one-year life of quality assurance, repair and replacement are guranteed.
The products can be customized according to customers' requirments and drawings.
INSTALLATION
Our company can send professional engineers to guide device installation and provide a professional plan.
AFTER SERVICE
Our equipment will have a one-year life of quality assurance, repair and replacement are guranteed.
FAQ
1. Are you a factory?
--- Yes, we are a professional exhaust gas treatment manufacturer for more than 15 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have sot inspection during production process. All goods will be tested and
double inspected before delivery, providing 100% guarantee for clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, solvent composition, working hours,etc
.
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 5 minutes during the working time. All messages will
be replied whenever they comes.
5.What's your payment terms?
--- Usually we accept 100%T/T at present. 50% initial payment,down payment before shipment. Other payment terms can be discussed
when order confirmed.
6.Where is your factory Located? How can I visit there?
--- We located in Shengtaian industrial park B,Loucun,Baoan district,Shenzhen, Guangdong Province
7.Do you provide OEM service?
--- Yes! We provide OEM & ODM service.
8.What's the lead time for your goods?
--- Normally 25 workdays. For some special parts, the delivery date will be discussed in detail.
--- Yes, we are a professional exhaust gas treatment manufacturer for more than 15 years.
2.How do you check the goods?
--- We inspect all the materials when they arrive, and have sot inspection during production process. All goods will be tested and
double inspected before delivery, providing 100% guarantee for clients.
3. How to select the suitable models?
---The parameters above is just for your reference. We need you to provide us the air flow, solvent composition, working hours,etc
.
4.How and when can I get the quotation?
--- Send us the inquiry or leave us message. We will get back to you within 5 minutes during the working time. All messages will
be replied whenever they comes.
5.What's your payment terms?
--- Usually we accept 100%T/T at present. 50% initial payment,down payment before shipment. Other payment terms can be discussed
when order confirmed.
6.Where is your factory Located? How can I visit there?
--- We located in Shengtaian industrial park B,Loucun,Baoan district,Shenzhen, Guangdong Province
7.Do you provide OEM service?
--- Yes! We provide OEM & ODM service.
8.What's the lead time for your goods?
--- Normally 25 workdays. For some special parts, the delivery date will be discussed in detail.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
