Share on (1600464446923):
AZS RAMMING MASS
using methoud:
1. Open the bag to check if the coagulant agent is dampened or hardened, and then spread the coagulant agent uniformly into the bag;
2. Mix certain amount of the mass according to on-site assumption. When it mixes well, add room temperature water by a ratio of 6-7%, or adjust the ratio according to local climatic condition and water content of the mixture. Blend it till there is no raw ramming mass left or till that it will break into pieces instantly when it falls to the ground after one unlooses his grip of the mass from the height of 0.33 meters;
3. The construction site and bonder should be clean and without sundries. The leftover well-mixed mass should be covered with plastic sheet film or placed in shady and cool place. The mass that is not dry and hard can be used again; otherwise, it should be crushed and used together with other raw material or abandoned.
4.Mix with water to make the material like slurry then press smooth by vibrating.
Physical and chemical index:
Item | Behaviors | ||||
AZSR-50V | AZSM-06J | AZSM-05 | AZSM-04L | ||
Chemical Composition% | Al2O3 | 48 | 48 | 48 | 48 |
ZrO2 | 30 | 30 | 30 | 30 | |
SiO2 | 20 | 20 | 20 | 20 | |
Others | 2 | 2 | 2 | 2 | |
Bulk density g/cm3 | 3.2 | 3.1 | 3.1 | 3.1 | |
Crystallographic analysis after being sintered at 1300/1500℃ | Corundum, zirconium oxide | Corundum, zirconium oxide | Corundum, zirconium oxide | Corundum, zirconium oxide | |
Thermal conductivity | Good | Good | Good | Good | |
Anti-corrosion property | Excellent at 1300℃ | Excellent at 1300℃ | Excellent at 1300℃ | Excellent at 1300℃ | |
particle diameter of grain | 0-5mm | 0-0.6mm | 0-0.5mm | 0-0.4mm | |
Application temperature | Cold/low temperature | Cold/low temperature | Cold/low temperature | Cold/low temperature | |
Quantity of water | 8-10% (proportion by weight) | 10-12% (proportion by weight) | 10-12% (proportion by weight) | 10-12% (proportion by weight) | |
Solidification | Water (ceramic) | Water (ceramic) | Water (ceramic) | Water (ceramic) | |
Packaging | 25kg/bag | 25kg/bag | 25kg/bag | 25kg/bag | |
Quality guarantee period | 12 months | 12 months | 12 months | 12 months | |
Used for | Under bottom paving, spreading, Melting end and working area | Under bottom paving, spreading and the place between fused cast brick and ERSOL 50 | Under bottom paving, spreading, and the joint between bricks of two layers that are between the fused cast brick and ERSOL 50 | Joint between bricks of two layers | |
CONCRETING TIME: BEGINNING TIME: 0:15~2:00 HOURS
FINISHING TIME: 3:00~6:00 HOURS
HEATING TIME: AFTER 150:00 HOURS
THIS MATERIAL IS WITHOUT PHOSPHORUS,
AND DOES NOT POLLUTE THE ENVIROMENT.
Company Introduction
Zhengzhou Sunrise Refractory Co., Ltd. locates at centre China. The major railway intersection of Jingguang and Longhai is close to Zhengzhou Xinzheng International Airport. To expand its import and export business, Sunrise has established long-term business with dozens of customer all over the world and maintained good cooperation with them.
Refractory Company, manufacture the main products are as follows: fused cast AZS 33#,36#,41#, glass furnace fireclay bottom block, mullite brick, zircon brick, alumina bubble brick, sillimanite brick, corundum brick, fireclay brick, high alumina brick, all kinds of glass furnace ramming masses, sealing materials, building fireclay, etc.

Sunrise can offer the customer excellent service relating to the production line of the float glass, which includes the design and advisory of the furnace and the tin bath, the matching of the materials and its construction. The products made by our company have been used in more than 80 production lines of float glass and production line of glass products both at home and abroad.

Sunrise conscientiously observes the government's line, policy, laws and regulations, follows the international trade practice, adheres to the principle of equality and mutual benefit, complies with contract and keeps the promise. BWTC upholds the principle of "combining industry with trade", "technology with trade" and "export with import", to serve its customer at home and abroad sincerely.


Our Services
1.We offer free of charge samples.
2.We give technical support to customers according to your specific requirement to extend the service life of your kiln and save money for you.
3.We can go to pick customers up when you come to visit our factory.
4.We offer good after-sale service.
Packing&Delivery
Wooden pallet and then polyethylene film is placed over it, finally the package is tied up with strips

Tianijin Port, Qingdao Port, Shenghai Port.
1.Can you offer free of charge sample?
Certainly. You need only pay the freight fee.
2.What is the service life of your bricks?
The service life of different bricks is unlike. It also depends on your using condition and method.
3.How many bricks can be contained in a 20GP?
Generally speaking, 18 to 20 tons. When comes to special-shaped bricks and insulation bricks, it's another mater.
4.Can you offer customers references?
Yes,we can.
New products from manufacturers at wholesale prices