Share on:
WL-D series Dual-Arm wheelchair lift provides an easy access for the people in wheelchair to get in/out of vehicles. The platform can move smoothly, reliably and safely, whose loading capacity can be up to 300kg.
There is electrical &hydraulic control system in WL-D series wheelchair lift, which can operate lift to extend, stow, lift and lower down. Lift performance is controlled by standard controller which can be wire control or remote control. Moreover, there is manual equipment for manual operation.
Maintenance free bearing is used at hinged joint, so that this lift is easy to maintenance. This lift will take up little vehicle space because of the exquisite and compact design and completely steel structure.
The WL-D Series wheelchair lifts are fully hydraulic in operation, for both the fold/unfold and up/down cycles. Lift operation is controlled by the standard hand-held control, the on-lift controls, or the optional remote control.
This DN-880U automatic wheelchair lift offers you dependable accessibility while its trim, compact design maximizes valuable interior space. The lift also features a strong durable steel frame built to give you years of dependable service.
model | DN-750-1070 |
platform width A | 720 mm |
platform length B | 1045 mm |
gross height C | 1158 mm |
max lifting height D | 880 mm |
geoss width E | 1143 mm |
door net width F | 1150 mm |
door net height G | 1230 mm |
depth H | 400 mm |
SPECIFICATIONS | ||||||
voltage | 12Vdc or 24Vdc | operation | wired remote control | |||
power | 800 w | own weight | 135-145 kg | |||
Loading capacity | 300 kg | packing size | 1200*600*1400mm |
¨ Automatic Inboard and Outboard Rollstops;
¨ powerful hydraulic pump ensure smooth, stable operation for heavy wheelchairs and scooters
¨ all-steel frame features convenient handrails for increased comfort and security
¨ stable, non-skid platform with automatic inboard and outboard rollstops accommodates most wheelchairs and scooters
¨ pre-lubricated bearings at all major pivot points offer long-term durability
¨ high gloss, polyester powder coat finish resists corrosion
¨ built in manual backup system
¨ Compact design, quiet and smooth operation
¨ Easy to maintain
anti-skip platform;
mechanical automatic front and rear rollstops;
standard two handrails;
lable shows max loading 300 kg
can be used for van rear door;
fully automatic operation;
operated by the wired remote control;
a key to control the power supply;
this lift can be operated manully for emegency;
locking device at two sides:
to avoid platform falling down to broke vehicle door;
If there is some problem happened, please call Xinder Quality Department (86-519-85139690),we will analyze the problem and give solution within 24 hours. If the problem is failed due to defective material or workmanship,
we will provide part free for replacement.
If you need to return some part for repair, please give us advanced notice as possible, and
allow reasonable amount of time to repair it. Shipping charges for returning parts to
Xinder-Tech shall be the responsibility of the customer. Xinder-Tech will pay shipping
charges when returning warrantable parts to the customer. Xinder-Tech will not accept
C.O.D. shipments of any returned goods.
The warranty does not cover: Malfunction or damage to parts caused by accident, misuse, lack of
proper maintenance, improper adjustment, alteration, mechanical of vehicle, hazards, overloading,
failure to follow operating instruction, or acts of nature (i.e. weather, lightning, and flood).
Xinder's obligation under this warranty is exclusively limited to the repair or exchange of
parts that fail within the applicable warranty period.
Xinder-Tech assumes no responsibility for expenses or damages, including incidental or
consequential damages. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply.
1-2 units/package
professional plywood case
international transportation service
QTY/package | packing size (mm) | net weight (kg) | gross weight (kg) |
1 set | 1200*600*1400 | 140 | 198 |
2 sets | 1200*1080*1400 | 280 | 260 |
Xinder-Tech Electronics Co., Ltd was established in 2001.
Xinder-Tech specializes in designing, manufacturing and selling vehicle mobility products, including wheelchair ramps, wheelchair lifts, electric steps, wheelchair tie down systems, swivel seat, hand driving system, car roof box and other mobility products.
Xinder-Tech is a leader company in specialist vehicle conversions and equipment for disabled people in China, and our products have taken up 95% of Chinese market. Meanwhile, our products have been exported to over 50 countries.
Our service includes R&D of products, manufacture, system debugging, on-site field visit to customer.
Our goal is to provide the best solutions for customer's requirements.
Xinder-Tech is an IATF16949:2016 compliant company.
we are family
research, developemnt
product test
we get training from our partners and also train our agents
we promote our products via exhibitions.