Safe Deliver Ethyl 3-Oxo-4-phenylbutanoate CAS 718-08-1
US $4.10-$4.50
Environmental copper polishing agent Brasscopper polishing agent
- Category: Oxidizing Chemicals >>>
- Supplier: Guangzhou Yishun Chemical Co. Ltd.
Share on (1600464713726):
Product Overview
Description
Products Description
Environmental copper polishing agent
First, the product code: Q / YS.106 (Yi Shun brand)
Second, product introduction:
This product is suitable for polished copper products. Do not need machinery and equipment processing, direct soaking method can be. No smoke, no smell. Does not contain any toxic and hazardous substances, is a very environmentally friendly chemical polishing products. Polished copper workpiece mirror effect. Provincial Labor Provincial equipment saves costs, can replace and surpass traditional mechanical polishing. Mechanical polishing can not be thrown to the dead, the use of chemical polishing can be solved.
Third, the use of methods:
1.The product consists of a mixture of A and B agents.
2.The operation process is as follows:
1) copper parts degreasing, in addition to dirt.
2) with tap water to clean the residual copper parts of the oil potion rinse.
3) press A agent: B agent: water to 4: 1: 3 with the polishing agent syrup. Stir, at the same time, the match after the medicine placed in a cold water bath at a temperature of 30 ℃ for cooling and heat treatment. Cooling water bath method of treatment, if conditions can also use ice to cool.
4）after degreasing descaling copper parts into plastic baskets. When loading the best erection of copper parts placed one-time do not put too much work-pieces, so as not to sharp heating.
5） copper basket will be installed in a good copper casting agent soaked in a good solution, while turning the workpiece, the workpiece polished evenly. About 2-4 minutes after the copper workpiece was uniform bright black.
6）remove the copper parts, promptly cleaned in water again. Then immediately into the addition to the film in addition to film. (film removal agent add 6-8 times the use of water)Film removal agent time is about 8-18 seconds.Film removal agent the plastic basket must be shaken to completely remove the film.. Especially pipe-shaped copper parts. The interior of the tube must be completely clean. After the removal of the workpiece revealed a very bright mirror effect.
7） timely self-use water fully rinse.
8） final passivation solution with copper color retention treatment.
Fourth, note:
1.The workpiece before polishing can not have oil and dirt and ink words and so on.
2.Syrup on the skin irritating and corrosive, please do not contact with the skin. Wear plastic gloves operation.
3.This product is prohibited in the course of contact with iron, nickel, stainless steel, manganese and other metals, or reduce the service life of the product.
4. In the polishing process of the workpiece is best to cool the bath cooling measures. Polishing liquid temperature control at 40 ℃ ± 5 ℃, do not exceed 50 ℃, and one-time do not put too much workpieces, so as not to sharp heating. When conditions permit, can be put into ice cubes to cool down. If the polishing effect is not good, such as copper surface red rose yellow, should pay attention to whether the temperature of 45 ℃, or should be promptly added A and B.
5.When loading the workpiece to be staggered placed, the best distance between the workpiece. Can make the workpiece erected hanging in the polishing liquid without overlapping with other parts and collision is the best, or need to flip the workpiece in time in order to polish evenly.
6.The case of pipeline operations, the best way to hang copper parts.
7.There will be loss of ingredients in the polishing process, in order to maintain the performance of the polishing liquid for a long time, 1-2 polishing products should be added with 2% -3% polishing liquid after each polishing, and stir well. Do not add water during polishing stock solution. use.
8.This product can not be exposed. Store in the shade.
Fifth, waste disposal methods:
1. Dilute the waste with 10x water and neutralize to pH 8-9 with lime or caustic soda to filter the precipitate.
2.The filtrate placed in the sewage tank by the degradation of microorganisms in nature can be directly discharged. This product is 100% biodegradable in four days.
Sixth, safe operation matters:
1.The product stored in the open cement floor or sand ground, is strictly prohibited exposure and high temperature.
2.This product is strictly prohibited with iron, metal powder, cardboard, fiber and flammable organic matter stored together. It is also strictly prohibited to be stored together with sodium hydroxide (potassium) and other chemicals and chemicals.
Second, product introduction:
This product is suitable for polished copper products. Do not need machinery and equipment processing, direct soaking method can be. No smoke, no smell. Does not contain any toxic and hazardous substances, is a very environmentally friendly chemical polishing products. Polished copper workpiece mirror effect. Provincial Labor Provincial equipment saves costs, can replace and surpass traditional mechanical polishing. Mechanical polishing can not be thrown to the dead, the use of chemical polishing can be solved.
Third, the use of methods:
1.The product consists of a mixture of A and B agents.
2.The operation process is as follows:
1) copper parts degreasing, in addition to dirt.
2) with tap water to clean the residual copper parts of the oil potion rinse.
3) press A agent: B agent: water to 4: 1: 3 with the polishing agent syrup. Stir, at the same time, the match after the medicine placed in a cold water bath at a temperature of 30 ℃ for cooling and heat treatment. Cooling water bath method of treatment, if conditions can also use ice to cool.
4）after degreasing descaling copper parts into plastic baskets. When loading the best erection of copper parts placed one-time do not put too much work-pieces, so as not to sharp heating.
5） copper basket will be installed in a good copper casting agent soaked in a good solution, while turning the workpiece, the workpiece polished evenly. About 2-4 minutes after the copper workpiece was uniform bright black.
6）remove the copper parts, promptly cleaned in water again. Then immediately into the addition to the film in addition to film. (film removal agent add 6-8 times the use of water)Film removal agent time is about 8-18 seconds.Film removal agent the plastic basket must be shaken to completely remove the film.. Especially pipe-shaped copper parts. The interior of the tube must be completely clean. After the removal of the workpiece revealed a very bright mirror effect.
7） timely self-use water fully rinse.
8） final passivation solution with copper color retention treatment.
Fourth, note:
1.The workpiece before polishing can not have oil and dirt and ink words and so on.
2.Syrup on the skin irritating and corrosive, please do not contact with the skin. Wear plastic gloves operation.
3.This product is prohibited in the course of contact with iron, nickel, stainless steel, manganese and other metals, or reduce the service life of the product.
4. In the polishing process of the workpiece is best to cool the bath cooling measures. Polishing liquid temperature control at 40 ℃ ± 5 ℃, do not exceed 50 ℃, and one-time do not put too much workpieces, so as not to sharp heating. When conditions permit, can be put into ice cubes to cool down. If the polishing effect is not good, such as copper surface red rose yellow, should pay attention to whether the temperature of 45 ℃, or should be promptly added A and B.
5.When loading the workpiece to be staggered placed, the best distance between the workpiece. Can make the workpiece erected hanging in the polishing liquid without overlapping with other parts and collision is the best, or need to flip the workpiece in time in order to polish evenly.
6.The case of pipeline operations, the best way to hang copper parts.
7.There will be loss of ingredients in the polishing process, in order to maintain the performance of the polishing liquid for a long time, 1-2 polishing products should be added with 2% -3% polishing liquid after each polishing, and stir well. Do not add water during polishing stock solution. use.
8.This product can not be exposed. Store in the shade.
Fifth, waste disposal methods:
1. Dilute the waste with 10x water and neutralize to pH 8-9 with lime or caustic soda to filter the precipitate.
2.The filtrate placed in the sewage tank by the degradation of microorganisms in nature can be directly discharged. This product is 100% biodegradable in four days.
Sixth, safe operation matters:
1.The product stored in the open cement floor or sand ground, is strictly prohibited exposure and high temperature.
2.This product is strictly prohibited with iron, metal powder, cardboard, fiber and flammable organic matter stored together. It is also strictly prohibited to be stored together with sodium hydroxide (potassium) and other chemicals and chemicals.
Company Profile
Guangzhou Yishun Chemical Co., Ltd
Guangzhou Yishun Chemical Co., Ltd. is a high-tech enterprise. At present, it is mainly committed to the research and development, manufacturing, production and network sales promotion of various chemical products, such as various metal surface treatment agents, metal process fluids, industrial cleaning agents, information chemical products and so on. In addition, it can also develop various special industrial cleaning agents, metal surface treatment agents and electronic information chemicals for various manufacturers. We will strive to develop into the most innovative fine chemical enterprise, continuously provide better products and services for all walks of life, and promote the chemical industry to a new level. Main production: electroless plating solution train: electroless copper plating water, electroless tin plating water, electroless nickel plating water, electroless gold plating water, electroless silver plating water Metal process fluid series: Copper polishing agent, copper polishing agent, copper blackening agent, copper passivation solution, aluminum polishing agent Auxiliary series for electronic industry: Gold remover, tin remover, aluminum remover, nickel remover, copper remover, wax remover Industrial cleaning agent series: glass cleaning agent, metal degreasing agent, aluminum degreasing agent, rust remover, film remover Other series: floor cleaner, mechanic's hand washing cream, tableware quick drying agent, glue remover We always adhere to the healthy development strategy based on the program of "environmental protection Yishun, green home", the product R & D and production take "environmental protection and green" as the guiding ideology, and the development concept of manufacturing "high, fine, advanced and specialized" chemical products. Continuously improve the innovation system; Continuously improve the ability of sustainable development; Make continuous efforts to create value for the society; We are committed to being a leader in environmental protection and chemical industry.
Certifications
Packaging & Dellvery
Packaging:Agent A:20kg/drum;Agent B:5kg/drum(With film remover 5 kg)
Delivery time:The same day
Delivery time:The same day
Ask and answer
1.Who are we?
Guangzhou Yishun Chemical was founded in 2010, headquartered in Guangdong, China, with about 500 employees. Mainly engaged inelectroless plating agent, metal surface treatment agent, industrial cleaning agent and other chemical reagent research and development, production and sales, is the most competitive industry leader in China.
2. How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment.
3.What can you buy from us?
Industrial cleaning agent,Metal brightening agent,Chemical plating agent,Environmental deplating agent,Metal blackening agent.
4. Why do you buy from us instead of another supplier?
Guangzhou Yishun chemical focuses on the industry for more than ten years,our products are environmentally friendly, do not harm the original workpiece, simple operation process, after-sales guarantee, customer repurchase rate is high, best-selling all over the world.
5. What services can we provide?
Complete process and products; Professional operation guidance and after-sales treatment; Accepted delivery terms: delivery after full payment;
Payment currency:USD, CNY;
Language: English, Chinese, Spanish, Japanese, Portuguese, German, Arabic, French, Russian, Korean, etc.
Guangzhou Yishun Chemical was founded in 2010, headquartered in Guangdong, China, with about 500 employees. Mainly engaged inelectroless plating agent, metal surface treatment agent, industrial cleaning agent and other chemical reagent research and development, production and sales, is the most competitive industry leader in China.
2. How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment.
3.What can you buy from us?
Industrial cleaning agent,Metal brightening agent,Chemical plating agent,Environmental deplating agent,Metal blackening agent.
4. Why do you buy from us instead of another supplier?
Guangzhou Yishun chemical focuses on the industry for more than ten years,our products are environmentally friendly, do not harm the original workpiece, simple operation process, after-sales guarantee, customer repurchase rate is high, best-selling all over the world.
5. What services can we provide?
Complete process and products; Professional operation guidance and after-sales treatment; Accepted delivery terms: delivery after full payment;
Payment currency:USD, CNY;
Language: English, Chinese, Spanish, Japanese, Portuguese, German, Arabic, French, Russian, Korean, etc.
We Recommend
Safe Deliver Ethyl 3-Oxo-4-phenylbutanoate CAS 718-08-1
US $20.00-$60.00
Safe Deliver Ethyl 3-Oxo-4-phenylbutanoate CAS 718-08-1
US $20.00-$60.00
New Arrivals
New products from manufacturers at wholesale prices
