AgapeBrew AGC 70 with 2 Submersible Pumps Glycol Chiller Digital Fermentation Control (1600487143099)

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description


High quality conical fermentation chiller with best compressor chilling effect of beer chiller


-1.jpg








Agapebrew chilling machine can be sold with our conical fermenter or sold separately.

1.jpg.jpg.jpg


 


The AgapeBrew AGC-70 is an efficient glycol chiller that has fantastic cooling performance. It's compact, quiet and ideal for a domestic environment.  It is powerful enough to chill well-insulated fermenters up to 300L in size or multiple smaller fermenters.  It has 500-watt cooling power making it suitable for crash chilling even in hot ambient temperatures.


 











Specifications

Refrigerant: R600a isobutane


Cooling Power: 500watts (0.67hp) (Rated at 22C)


Power Consumption: 155w


Tank: 17L


Max Head (per pump): 5meter


Max Flow (per pump): 600L/Hr


Output Barb Size: To suit 10mm ID tube



 











Integrated Pumps
Unlike other units, this unit comes with 2 integrated pumps and temp controllers.  This will allow you to independently cool two fermenters at the same time at different temperatures.  Set the temp on the main reservoir to -4C then (after you have added 20% glycol) then on the other side of theAGC-70 set the other two temperatures to your ideal fermentation temperatures.  No additional wiring necessary.  Pumps included and already wired up ready to use.

 


 











Chill Wort
Cooling wort from 100C to 50C is quite easy with tap water most of the time.  With that said cooling from 50C to 18C can take ages.  This is because your tap water might be as hot as 35C meaning it would be impossible to mater how much water you use to get down to 18C (yeast pitching temperatures).  The AGC-70 solves this problem and is the easy way to take advantage of sub-zero glycol to cool your fermenter to acceptable temperatures for the fermentation process (Be noted: only use this unit to chill wort after you have already chilled down to <50c with water, otherwise there is a risk of overloading the compressor).

 











Heating
AgapeBrew AGC-70 with 2 Submersible Pumps - Glycol Chiller can also be set up to heat the reservoir. There is a push in port on the two temperature controllers to control the heating of the device you decide to use.

 


 











Compressor NOT Thermoelectric
Although thermoelectric glycol units are significantly cheaper to make to really get the power needed to chill wort quickly and efficiently you need compressor cooling.  Compressors increase the cost of the manufacturing process however due to the fact they are between 3-6times more electrically efficient for this application the initial manufacturing cost will easily be recouped in electrical savings.  In addition to this compressors are significantly more powerful and able to pump more heat even in hot ambient temperatures where thermoelectric units will struggle.  So if you want to retain the ability to crash chill fermenter you can't go past the cooling power of compressor cooling.

 











Installation Requirements

This unit requires a 100mm Clearance around all air vents.


Regular maintenance of dust around radiator is required to ensure optimum efficiency.


Ideally used with AgapeBrew Glycol/Water ratio of 20% to achieve -10°C freezing point.



1600487143099
0.0093 s.