100L/200L/300L/400L/500L/800L/1000L Industrial Steam/Gas/Electric Jacketed Kettle Cooking Mixer Pot Jacket Kettle With Agitator

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description





Application:
The stainless steel jacket kettle can be applied to a wide variety of foods processing, such as candy, medicine, dairy,
liquor,cake, candied fruit, drink, canned goods, sauced meat etc.It also can be used in making soup, cooking stir-fry, stewing meat, cooking porridge and so on, and it is a wonderful equipment to improve quality, reduce time and improve working conditions during foods processing.


Optional Type of Jacket Kettle:
Gas Jacket Kettle
you can use natural gas, LGP and any other kind of heating medium that you have.To natural gas, liquefied petroleum gas as a heat source, full combustion, smoke-free dust-free,a small amount of carbon deposition, no environmental pollution.The use of powerful energy- saving burners, fire fierce, thermal efficiency than similar products increased by 25%, air consumption than similar products to reduce about 20%.

Steam Jacket kettle
with Dimple jacket inside the walls for steam inject and heating. It takes the steam as thermal source. The inner surface contacted with the product are all SUS304 Or SUS316.

Electrical Jacket Kettle
Compared with steam heating, the heating temperature of the electrical jacket kettle is higher than steam jacket kettle, Which can shorten the cooking time.

Also could be made according to customers' requirement


Main technical parameter


Capacity
Diameter* height
Style
Pressure (Mpa)
Speed
(rpm)
Motor power/
heating power(KW)
HD-50L
60*45cm
Vertical/tilting/emulsifying
0.3
36
0.75kw/8kw
HD-100L
70*50cm
Vertical/tilting/emulsifying
0.3
36
0.75kw/12kw
HD-200L
80*55cm
Vertical/tilting/emulsifying
0.3
36
1.5kw/15kw
HD-300L
90*65cm
Vertical/tilting/emulsifying
0.3
36
1.5kw/15kw
HD-400L
100*75cm
Vertical/tilting/emulsifying
0.3
36
1.5kw/18kw
HD-500L
110*85cm
Vertical/tilting/emulsifying
0.3
23
2.2kw/18kw
HD-600L
120*95cm
Vertical/tilting/emulsifying
0.3
23
2.2kw/24kw
HD-1000L
140*115cm
Vertical/tilting/emulsifying
0.3
23
3.7kw/30kw




Products Description




Structure:
Jacketed kettle can use steam with certain pressure as the heat source, or electric heating. The electric heating uses 220V/380V/415V(customized) power as the heat source. The jacket is equipped with electric heating rod, thermocouple and heat transfer oil (self-made), which can reach 200 degrees. It is controlled by an electric control box and has a built-in temperature control system. The equipment has the advantages of large heating area, uniform heating, short boiling time and easy control of heating temperature.

Mirror polishing, electric control box and bracket are made of stainless steel SS304; the brand of electrical components is Chint or Schneider.

Capacity, jacket working pressure, motor power, heating power and mixer structure can be customized.


Wall scraper: using whole piece of Teflon material, easy to clean and replace, less dead angle, reduce material sticking to the wall.

Semicircle design of discharge outlet: it is convenient to put materials upside down without dead angle.

Rotating device: the cast iron integral worm gear is adopted, which meets the safety standard (SUS 304 hygienic food grade).

Oil filling inlet: 102 pipe diameter, convenient and not easy to flow out.


Mixing device:
1. The reducer is made of Taiwan brand;
2. Detachable frame;
3. Stainless steel bearing;
4. High temperature resistant sealing ring (preventing steam from entering the bearing and reducer);
5. No positioning at the bottom of shaft (reducing residue).

Electric control box:
1. Temperature controller to control temperature
2. Split PT100 thermocouple
3. Schneider electrical components
4. Stainless steel 304 box.


Stainless steel small oil cup: heat transfer oil inlet, when the jacket kettle tilts and rotates, the oil in the oil cup will not leak out.

Electric heating rod: it is easy to disassemble with threaded connection, and the gasket is made of Teflon material, which can withstand 300 degrees without leakage.

Tilting support: stainless steel 304 material is used as a whole.



Company Profile














FAQ


1. About Delivery term
Q: What's the delivery term for doing business with you?
A: EXW/FOB/CIF/DDU… it depends on preference of clients.
2. About Lead time
Q: What's the leading time after placing order?
A: After getting your confirmation, mixing tank about 25 days, pump 15 days, colloid mill 10 days. However, it depends on production schedule is in slack or peak season, and the complication of machines.
3. About Payment time
Q: What's the payment term?
A: T/T 40% as down payment, 60% balance payment before delivery.
4. About Quality
Q: How do you control your quality?
A: All machines before delivery will be tested and send video for customer, if no problem then arrange balance payment. Meanwhile,CE is available for customers' needs.
5. About Packing
Q: How do you pack the machines?
A: Standard export wooden case, to avoid damage during delivery.
6. About Customized
Q: Can you produce according to the samples?
A: Yes,we can produce by your samples or technical drawings.


0.0176 s.