The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results.
If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.
The instrument is used in metrology institutes, calibration laboratories and in industry in the fields of quality assurance, facility commissioning and system monitoring.
Areas of use:
- Checking hydraulic presses
- Reference measurements in assembly lines
- Test of robotic pressing forces
- Calibrating test equipment
- Calibrating of high-precision measuring devices
The TRANS CAL 7281 can be fitted with standard or rechargeable batteries for portable use or can run from an external power supply. Combined with a reference sensor the testing device provides a high-precision reference measurement chain e.g. for force measurements, but is also ideal for service engineers as a tool for locating faults in device or sensors.
The choice of sensors includes strain gauge, normalizedsignal +/- 5 V / +/- 10 V and potentiometric sensors. The LCD graphics display shows the live measurement value and the corresponding bar indicator. It also supports display functions such as data-logger, tared value in % and upper/lower limit for the comparator with simultaneous indicator (< = >) of the evaluation result.
For routine testing and also fault-locating tasks, the tester makes it really simple to measure isolation resistances and input/output resistances. The equipment test function is a quick and easy way to verify that the display device complies with the characteristic value, offering strain-gage simulation of up to +/- 50 mV/V or output of a normalized signal of up to 10 V. German-accredited DKD/DAkkS calibration certificates or factory calibration certificates are optionally available. The DigiCal configuration and data-acquisition software provides useful display and reporting functions.
Supported sensors: Strain gauge/normalized signal +/- 5V, +/- 10 V, potentiometric sensors
Device test: Strain gauge simulator up to +/- 50 mV/V
Easy adjustment through burster TEDS
Excellent linearity with non-linearity < +/- 0.001 %
Storage of up to 16 measurement programs
Data logger for up to 30.000 measurements
Factory calibration certificate and / or German accredited DKD / DakkS calibration certificate optionally available for the instrument / entire measurement chain
|Measurement accuracy||< ± 0.001 % F.S.|
|Sample rate||0.1 ... 1200/s (DC) - 0.1 ... 2/s (AC)|
|Supply voltage||10 ... 28 VDC|
|Reference measurement device||Yes|
|Strain gauge simulator||Yes|
We offer various payment options. Please contact us for futher details.
burster praezisionsmesstechnik gmbh & co kg
With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring.
burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001:2015. burster supplies 7500 customers worldwide. burster's innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks.
burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers' needs.
|Contact person||Mr Matthias Bodemer|
|Phone number||+49 7224 6450|
|Address||Talstrasse 1-5 |