Top quality energy conservation plg series multilayer continual plate disc drier machine for potassium carbonate

Share on:


Price:$8,000.00
Price in USD:Details

Quantity:


Product Overview

Description





Product Overview


Top quality energy conservation plg series multilayer continual plate disc drier machine for potassium carbonate
The plate disc dryer is a multi-layer fixed hollow heating circular loading tray, a rotating harrow stirring, a vertical continuous drying equipment mainly based on heat conduction. In this drying process, the heat carrier is passed into the hollow discs of each layer, and the wet material placed on the disc surface is indirectly heated by heat conduction. The moisture evaporates at the operating temperature, and its steam is discharged with the exhaust gas of the equipment, so that qualified dry products can be continuously obtained at the bottom of the equipment. In recent years, many countries have widely used it in the fields of chemicals, dyes, pesticides, plastics, medicine and food, and have continuously improved in use. Compared with traditional drying equipment, it has the advantages of high thermal efficiency, low energy consumption, uniform drying, good product quality, small footprint, less auxiliary equipment, less pollution, continuous production, convenient operation and wide application range. Therefore, it has a broad development prospect in drying technology, which has attracted more and more people's attention and research. According to product performance, drying requirements and processing capacity, the disc dryer adopts a series of measures such as the stepless speed regulation of the main shaft, the manual adjustment of the disc feeder to adjust the height of the sleeve, the control of the temperature distribution of the heating plates of each layer, and the cooling in the final stage. The superior performance of the disc continuous dryer is exerted.
dried quickly.


FEATURES AT A GLANCE




Continuous run
High heat efficiency
Simple configuration
Small occupying area
Low energy consumption
Easy operating and control
Friendly operating environment


Title goes here.
1. Continuous operation, high thermal efficiency. The tray-type continuous dryer is dried by conduction heat transfer. During the drying process, only a very small amount (or no) of air is introduced into the dryer, and the amount of exhaust gas carried is very small, so its thermal efficiency can reach more than 65%.
2. Low power consumption and low noise. Due to the thin material layer and low spindle speed in the drying process, the power required by the material conveying system is small, and the power consumption is very small. The power consumption of the complete drying device is only 1/5~1/7 of the power consumption of the convection heat transfer device. , and the noise is small.
3. The material is heated evenly and the drying time is short. During the drying process, the material rolls forward along the Archimedes spiral trajectory in the drying tray, the distance traveled by the material is 5 times the radius of the drying tray, and falls layer by layer, so the time for the material to contact the heating plate is basically the same, and the heating is very uniform.
4. Small material loss and good environmental protection.
5. Great drying capacity.
5. The equipment is closed and continuously operated, and the labor intensity of workers is low.
6. The drying medium can use the steam generated by the waste heat boiler, thus saving a lot of coal burning.
7. The product quality is stable and better.









Working Principle


The wet material is continuously fed from the feeder to the drying plate of the first layer on the upper part of the dryer, and the rake arm with the rake leaves rotates to make the rake arm rotate, so that the rake leaves continuously turn over the material. The material flows over the surface of the drying tray along the exponential spiral, the material on the small drying tray is moved to the outer edge, and falls to the outer edge of the large drying tray below, on the large drying tray, the material moves inward and falls from the middle. The material mouth falls into the following layer of small drying trays. The large and small drying trays are arranged alternately up and down, so that the material can flow through the entire dryer continuously. A heating medium is introduced into the hollow drying pan. The heating medium is in the form of saturated steam, hot water, heat-conducting oil and high-temperature molten salt. The heating medium enters from one end of the drying pan and is led out from the other end. The dried material falls from the last layer of drying tray to the bottom layer of the shell, and is finally moved by the rakes to the discharge port for discharge. The moisture overflows from the material and is discharged from the moisture outlet on the top cover, and the moisture in the vacuum disk dryer is discharged from the vacuum pump port on the top cover. The dry material discharged from the bottom layer can be packed directly. By adding auxiliary machines such as fin heater, solvent recovery condenser, bag filter, dry material back-mixing mechanism, induced draft fan, etc., its drying production capacity can be improved, and drying paste and heat-sensitive materials can be easily recovered. Solvent, and can carry out pyrolysis and reaction operations.




Product Parameters


We have more different models to choose from and can also accept customized services. If you have more requirements, please feel free to contact us.


Specifications
 OD mm
Height mm
Drying area m2
Power Kw
1200/4
1850
2608
3.3
1.1
1200/6
3028
4.9
1500/8
2100
3442
10.7
2.2
1500/10
3862
13.4
2200/14
2900
4942
43.1
5.5
2200/16
5362
49.3
3000/18
3800
7050
108
13
3000/20
7650
120
Note: some parameters are adjusted according to different materials during design


APPLICATION SCOPE


(1) Organic Chemical Products:
Polyvinyl chloride resin, polytetrafluoroethylene resin, fumaric acid, anthraquinone, nitroanthraquinone, p-aminophenol, melamine, cyanuric acid, p-aminobenzenesulfonic acid, antioxidant 168, color phenol As, hard Fatty acid salt, aniline, nitroaniline, dipentaerythritol, chlorinated paraffin, calcium formate, triethylenediamine, EDTA, rubber accelerator, sodium benzene sulfinate, isophthalic acid, sodium dimethyl pentasulfonate, Thiourea, oil-soluble nigrosine dye, acid black dye, indigo and other organic chemical raw materials and intermediates.
(2) Inorganic Chemical Products:
Light calcium carbonate, activated calcium carbonate, nano-scale ultra-fine calcium carbonate, magnesium carbonate, sulfide concentrate, pyrite, copper-nickel ore, aluminum hydroxide, white gray black, strontium carbonate, barium carbonate, potassium carbonate, lithopone, insurance powder, silicon powder, barium sulfate, potassium sulfate, microsphere catalyst, magnesium hydroxide, copper sulfate, nickel sulfate, ammonium nickelate, sodium molybdate, sodium chloride, cryolite, red iron oxide, nickel oxalate, oxalic acid Cobalt, iron oxide black, lithium hydroxide, nickel hydroxide, zirconium hydroxide, calcium phosphate, sulfur, etc.
(3) Medicine and Food:
Ampicillin, Deng salt, L-phenylglycine and intermediates, cefotaxime, ceftriaxone, dipyridine, cimetidine, vitamin B12, vitamin C, medicinal salt, medicinal aluminum hydroxide, medicinal partial Magnesium silicate, caffeine, tea, flower extract, ginkgo biloba, chocolate powder, starch, corn germ and other raw materials and pharmaceutical intermediates.
(4) Feed and Fertilizer:
Potassium carbonate, biological potash fertilizer, protein feed, chlortetracycline for feed, mycelium, bran, distiller's grains, grain, seeds, herbicides, cellulose, calcium hydrogen phosphate for feed, etc.


Product More Pictures






PACKING AND SHIPPING






Company Profile


LIAOYANG WINTECH INDUSTRIAL CO.,LTD, takes Centrifugal Filter Equipment and Drying Equipment processing and manufacturing as the main industry, main products are Horizontal Decanter Centrifuge, Disc Centrifuge, Tubular Centrifuge, Flat Series Centrifuge, CO2 Supercritical Extraction Equipment, Spray Dryer, Fluid Bed Dryer, Drying Oven, Drum Dryer and corresponding supporting equipment, eg. food line, pharmaceutical line, chemical line. At the same time, to undertake standards and non-standard products. Our equipment is exported to Europe, America, Southeast Asia, Africa and other countries, and has been praised by foreign customers.






Our company has professional engineers with strong new product development ability, and can develop equipment products according to the actual needs of customers. Our company has ISO 9001 certification, CE certification and other relevant authoritative parts of professional identification and recognition. At the same time, facing the fierce market competition, our company is relying on its own advantages, integrating external resources, optimizing internal management, constantly exploring and innovating, and striding forward in the direction of business specialization and diversification. Our company adheres to the business philosophy of quality and service, and wholeheartedly provides high-quality products and services for new and old customers to meet the needs of customers to the maximum extent. Serve customers, achieve customers, sincerely look forward to cooperating with new and old customers to create a better future.




Our company follows strict quality controls and various systematic procedures. We take utmost care of quality at every stage of the manufacturing process.Our research and development wing is our asset that develops and incorporates innovative ideas and products. Our Team is full of experienced and qualified professionals, who have sound knowledge about the quality of our medical machinery.




We sincerely invite you to be our long term relationship friend , and we always prepared to provide our best services for you and would like you to know below we want to present :

1. Each machine is manufactured by professional experienced staff.
2. 12 months warranty + 100% QC inspection Before Shipment.
3. Overseas services provided. Technicians can be sent to spot for guiding the installation and debugging. Training operators and
accomplish the commissioning.
4. Consultant services for whole machine life, 24 hours technical support by email and phone.When warranty date expired,
lifetime maintenance service is provided and at buyer’s cost.


SIMILAR PRODUCTS




FAQ


Frequency Asked Questios:
1. What data is required to confirm the model?
(1) Materials to be dried (2) Treatment capacity per hour (3) Moisture requirements before and after drying

2. What certificates do you have?
We can provide CE, ISO 9001, etc.

3. What is the warranty period of the equipment?
Normally 1 year warranty.

4. Can we visit your factory?
Of course, we sincerely invite you to visit. If it's not convenient for you, we can also arrange teleconference video.

5. Can we bring our own materials to your factory for experiments?
Of course, you are welcome at any time. We will arrange professional engineers and technicians to do experiments and analyze data
for you on site. You can also send your materials directly to our factory.

6. Can it be customized?
Of course, our equipment can be customized according to the actual requirements of customers.

7. How long is the construction period?
It's about 30 working days, but it also needs to be determined according to the specific equipment model, order number, etc., But
if you need it urgently, please let us know, we can arrange the factory to rush production.

8. Will you provide installation services?
If you need, we can arrange professional technicians and engineers to install and debug on site.



0.0304 s.