Share on:
Straightening & Cutting Machine for MI Cable
1. Key description
Pause | Power indicator lamp |
Manual/Automatic | Manual / automatic switch Manual on the left and automatic on the right. |
Manual/Cutting | Motor start switch, stop on the left, start on the right |
Pause | Power switch |
Backward | Move forward manually, press the material forward in manual state, use when loading the line |
Forward |
Manually retreat, press the material back in the manual state, use when retracting |
Cutting | Manually cut off, press the material in the motorstarting state to cut off the material, and cut the wiremanually before cutting it. |
The data on the control panel can be adjusted according to the actual.
2.Counter setting method
Turn on the power, LED display, press zero, press RST to reset.
Press SET to enter the parameter settings LED display.
Press ENT again until you return to the boot interface - complete.
3.Cold end length adjustment
Cold end length adjustment screw twist--Lengthened cold end length
Cold end length adjustment screw twist out--Shorten the cold end length
4.Depth adjustment of groove
Cold end depth cutting adjustment screw twist--Shallow cold end depth
Cold end depth cutting adjustment screw twist out--Deepen the depth of the cold end