MS910 Uv resistance and high elasticity waterproof coating MS polymer modified silane waterproof coating for concrete roofs
- Category: >>>
- Supplier: Shanghai Sepna Chemical Technology Co. Ltd.
Share on (1600517996924):
Product Overview
Description
Our Products
Product Description
MS910 Uv resistance and high elasticity waterproof coating MS polymer modified silane waterproof coating for concrete roofs
are related to temperature and humidity. Increasing temperature and humidity can reduce surface
drying and curing time, and low temperature and low humidity can also delay this process.
MS-910 silane modified coating is an odorless, solvent-free, isocyanate free and PVC free material.
The product has been proved to have excellent UV resistance, so it can be used not only indoors but
also outdoors.
Key Features
1. Solvent free, tar free, pollution-free, non-toxic, tasteless and harmless to construction personnel;
2. Excellent weatherability, anti-aging, mildew resistance, full extension, full bonding.
3. Excellent appearance, excellent sealing, excellent waterproof and excellent wear resistance;
4. Wide bonding range, fast curing, convenient repair, tear resistance, no cracking, and can be sprayed with paint
2. Excellent weatherability, anti-aging, mildew resistance, full extension, full bonding.
3. Excellent appearance, excellent sealing, excellent waterproof and excellent wear resistance;
4. Wide bonding range, fast curing, convenient repair, tear resistance, no cracking, and can be sprayed with paint
Typical Applications
Roofs
Bathroom
Balcony
2. Anti seepage and leakage prevention of reservoirs, water towers, water tanks, swimming pools, baths, fountain pools, reservoirs, sewage treatment pools and drainage and irrigation channels;
3. It is used for leakage and corrosion prevention of basement, underground tunnel, deep well and underground pipeline with good air permeability;
4. Bonding and moisture-proof of various floor tiles, marble, wood, asbestos, etc.
Reservoirs
Kitchen
Wall
Swimming pool
Drainage
Underground parking
Technical Data Sheet
PROPERTY | STANDARD / UNITS | VALUE | ||
Appearance | Visual inspection | White, customizable color Self-leveling | ||
Density | G/cm3 | 1.4±1 | ||
Tack free time | Min | 30-50 | ||
Viscosity | MPa.s | 10000±15000 | ||
Tensile Strength at Break | MPA | ≥1 | ||
Elongation at break | % | ≥250-350 | ||
Construction temperature | ℃ | 5-35 | ||
Operating temperature | ℃ | -40～+100 | ||
Solid content | % | ≥98 | ||
Shelf life | month | ≥6 | ||
Note：All data above were tested under special condition (7 days after full cured). | ||||
Application Process
20 KG can paint 5 ㎡ each time
Please paint at least 2 times to make sure the effect.And it will get perfect effect if paint 3 times.
Coat film
Thickness : 2.00mm, usage is 2.5kg per square meter
Thickness : 2.00mm, usage is 2.5kg per square meter
Thickness : 3.00mm, usage is 3.8kg per square meter
Thickness : 5.00mm, usage is 6.25kg per square meter
Thickness : 5.00mm, usage is 6.25kg per square meter
Environmental requirements：The temperature is 5~35℃ and the humidity is 35 ~ 85%RH.
Preparation for Operation：
Tools: The serrated plastic board, brush, 20 Kg MS waterproof coating, rubber gloves and cleaning tools like blade .etc
asphalt, tar, paint, wax, rust, water repellent, curing agent, isolating agent and film. Surface
cleaning can be dealt with by removing, cutting, grinding, cleaning, blowing, and so on.
If there are cracks on the substrate surface, first step is to fill them, and the surface should be
leveled. Operation after the sealant curing more than 3mm.
leveled. Operation after the sealant curing more than 3mm.
Theoretical dosage: 2.0mm thickness, 2.5 Kg / ㎡coating needed
Spading Sweeping Blowing
First step
Open waterproof coating and Brushing the part like corner, tubes root, then symmetrical scraping. and painting MS coating
The thickness of the coating is generally 1.5mm. (Avoid bubble).
When operation,It should be considered about the size, shape and environment of the construction
area
When operation,It should be considered about the size, shape and environment of the construction
area
Second Step
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The
thickness of the coating should be 1.5mm, and the direction of smearing should be perpendicular
to the first time. The specific operation is the same as the first step.
Finished appearance
Wait for MS waterproof coating to fully cure
After application
Protection: If necessary, a proper protective layer can be operated on the surface of the coating.
The use of protective layer can better waterproof and prolong the waterproof time.
Protection: If necessary, a proper protective layer can be operated on the surface of the coating.
The use of protective layer can better waterproof and prolong the waterproof time.
You can also use no protective layer.
This is a UV resistant waterproof coating.
This is a UV resistant waterproof coating.
Attention of operation
1. Don’t mix alcohol into the product, it will cause the product invalid. The tools with the alcohol can’t be used before cleaning well.
2. The total coating thickness is around 3-5mm, special parts should be more than 5mm.
3. Avoid water, pollution and damage before tack free time of the coating,prohibit any operation before full curing (about 24Hrs).VERSION 1.05 / 2016-01 SEPNA CHEMICALS WWW.SEPNA.CC MS910 Eco-friendly Exposed Waterproof Coating
4. Ventilated environment is required as operating, and some necessary safety precautions should be taken. During operation, records should be filled in truthfully. For special projects, follow the construction description strictly.
5. Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.
6. It is forbidden to build on the surface of the wet substrate.
7. Transportation: Avoid damp, high temperature,isolation and rain, far away from heat, handle with care and prohibit extrusion collision.
About us
On May 15th 2016, Sepna Chemical set up a new plant in Suzhou city successful.
This will improve the productivity greatly of Sepna adhesives.
This will improve the productivity greatly of Sepna adhesives.
is a professional industry adhesive supplier for 10+ years, with two factories in Shanghai and Suzhou in China. We have R&D team and QC team.
Sepna’s products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia Middle East and Oceania, etc.
Our company mainly produces five kinds of adhesive ,
SEPNA means the five different materials , S means silicone,E is epoxy, P is Polyurethane, N is Natural resin, A is Acrylic.
Sepna’s products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia Middle East and Oceania, etc.
Until now, she has serviced nearly 1000 enterprises all over the world.
Exhibition -OEM / ODM Available
We have a professional design team providing package design solutions for OEM / ODM customers free of charge.
Certifications
We have passed GB/T 19001-2016 IDT IS09001:2015, IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS/PONY. etc, certification of products.
Our Test Instruments
We have imported Raw Materials and Testing Equipment.
We also have Excellent QC Team and R&D Team.
We also have Excellent QC Team and R&D Team.
1.Q: Delivery time?
A: Normally, the delivery of sample order is 7 to 10 days, for standard order, 15-20 days
A: Normally, the delivery of sample order is 7 to 10 days, for standard order, 15-20 days
2.Q: How to get samples?
A: Normally, Sepna offers our customer 1-2 pcs or 50-100 g free samples for quality testing.
3. Q: How to be Sepna's distributor?
A: As the growing of Sepna's global business, we need to find more and more distributors and agents worldwide. Sepna will provide the best solution and service for our partners.
For more information, pls contact our salesperson or call us: +86-400-882-132.
4. Q: Any OEM service?
A: Yes. Sepna can offer the customer OEM label service, and will give the protection of the your right in your market.
5. Q: Do you have MOQ?
A: Yes. Normally, MOQ is 2000 tons.
You are welcomed to do ODM & OEM. 24Hours Reply.
3. Q: How to be Sepna's distributor?
A: As the growing of Sepna's global business, we need to find more and more distributors and agents worldwide. Sepna will provide the best solution and service for our partners.
For more information, pls contact our salesperson or call us: +86-400-882-132.
4. Q: Any OEM service?
A: Yes. Sepna can offer the customer OEM label service, and will give the protection of the your right in your market.
5. Q: Do you have MOQ?
A: Yes. Normally, MOQ is 2000 tons.
You are welcomed to do ODM & OEM. 24Hours Reply.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
