Laser Mole Removal Moles And Wart Remover Portable Ultrasonic Instrument Facial Machine

Brief Introduction
RU-505, 5 in 1 multifunctional beauty instrument, includes the functions of High frequency electrotherapy, Vacuum, Spray and Galvanic induct and educe. Each function has a separated switch, easy and simple to handle. Overcome the defect of traditional multifunctional instrument that with one function break down, all the others could not be used. The machine is with generous, elegant and portable design.
Spot removal
By means of coagulation of high-frequency electric current, urges the cell necrosis of the epidermis, which can thoroughly
eliminate all kinds of spot on the face and the other skin surface. The effect is obvious with no bleeding or scar left.
Usage:
1. Connect the spot pen to the corresponding outlet.
2. Connect the power and spin the knob upon “SPOTS”, the indicator light will be on.
3. Adjust the working intensity with the knob.
4. Touch the spot with the pen. After treatment, coating antimicrobial for 2 or 3 days.
High Frequency Electropathy
High frequency electropathy is a good assistant of healing the acnes. The high frequency current could infiltrate into deep skin layer, generate heat, and accelerate the blood circulation, help to absorb the nutrition and expel the waste. The heat could relax the tense nerves, help the dissolvent to infiltrate the skin, and regulate sebum production. It could disinfect and accelerate the wound healing.
Usage:
1. Connect the power line and the electropathy stick.
2. Select a proper glass pipe, disinfect and plug into the stick. 3 pipes for choice. Mushroom-shaped is for large areas such as face, forehead and neck; Spoon-shaped is for middle areas and ball-shaped for small areas.
3. Spin the knob upon “HF”, the indicator light will be on.
4. Hold the stick and approach to the treating part, adjust the intensity with the knob to a suitable level.
5. Lean the pipe close to the skin, slip rotationally from up to down for about 5minutes. Low intensity and short time for dry skin but higher intensity and longer time for oily skin. Touching the skin with the pipe intermittent could generate spark to kill the bacteria, diminish inflammation and accelerate wound healing. It is an efficient way to cure the acne.
6. After the treatment, switch off.
Mode:
1. Direct therapy
The beautician holds the stick and massage on the face, adjust the intensity. While the ultraviolet light occurs, rotate for 5
minutes. The high frequency current will act on the skin epidermis, generate vibration and heat, and the ozone will kill the
bacteria. It could use to treat oily and acne skin.
2. Salutatory therapy
Touch the skin with the electrode pipe intermittently, while the pipe leaves the skin, sparks will occur. It could kill the
bacteria and diminish inflammation, accelerate the wound healing. Treat for about 30 minutes. If the patient is afraid of the sparks, cover the eyes with towel. This therapy is suitable to cure the acnes on the face.
Ultrasonic
1. By the high frequency vibration (1MHz-3MHz), generate ultrasonic with strong penetrability. It is a special instrument that could radiate an alternate wave and spread around. It is much stronger that the normal sonic wave, with high frequency, good directivity, strong penetrability and great expandability.
2. Because of the high frequency vibration, it will do soft and micro massage to the skin cells, accelerate the blood circulation, facilitate the metabolism, activated the cells and improved the absorption of nutrition.
3. High frequency micro massage could eliminate the aged cells, expel the toxin and fine the wrinkles. Accompany usage with cosmetic product or medicine, it could treat and improve the skin problems.
4. The frequency of ultrasonic could also generate resonance vibration of the cells, consume the fat and improve water absorbing capacity of cells, rejuvenate the skin and recover the elasticity.
Usage:
1. Before using this function, clean the skin where would be treated by cleanser.
2. After cleaning the skin, choose a proper couplant according to the skin condition and disease to achieve the best effect.
3. Select an ultrasonic probe and connect to the corresponding outlet. And also press the button””. Press up, it is the large
probe; press down, it is and small probe.
4. Connect the power. Spin the knob to turn on. The display frame will show the working time”15”. Adjust with the button.
5. Select continuous or pulse wave by pressing the button . Press up is continuous wave; press down is pulse wave.
6. Press “S/P” button and begin to work. Adjust the intensity with the knob.
7. While operating, the beautician should hold the probe steadily, rotate slowly and evenly, let the skin have a sufficient
ultrasonic treatment.
8. Take the probe away after finishing the treatment, keep the essence on the skin and let it penetrate thoroughly.
Vacuum & Spray
1. The glass pipes could use to vacuum the comedones, acnes, pustules and clean the dirt and oil contamination, make the skin clean and fresh.
2. The sprayer could convert the toning lotion, anti-inflammatory lotion or shrinkage water into vapor and spray.
Vacuum
1. Connect the glass pipe to the rubber tube at one end and the filter at the other and then the filter to the vacuum outlet.
2. Connect the power. Press the “POWER” button. While the indicator light is on, machine is ready to work.
3. Press the hole on the pipe, it will generate attractive force. Put the pipe on the treat part to vacuum out the blackheads, oil dirt etc.
Spray
1. Connect the sprayer to the tube, and then connect the tube to the spray outlet.
2. Connect the power, and press the “POWER” button. Hold the sprayer with thumb and long finger, and press the breather hole with forefinger. Air pressure will be engendered inside the bottle and spray out the toning lotion.
Accessories:

Sample within1-2 days
Wholesalea 3-7days
OEM 7-10days