Quick Shine Polishing Compound Car Care Ceramic Coating Anti Corrosion Acid And Salt Resistance Graphene Coating
- Category: >>>
- Supplier: Shenzhen Haydn Electronic Technology Co. Ltd.
Share on (1600540345516):
Product Overview
Description
Ultima Graphene is 3D polysilazane modified ceramic molecular matrix structure ,graphene provide the ultra-high hardness of ceramics coating,and exhibits great advantages compared with old generation polysiloxane ceramic coatings.we specially designed using the most advanced technologies available .
Long-term Test Guidelines:
Durability and hydrophobic effect. Ultima Graphene provides protection for at least 3-5 years and super-hydrophobicity for about 2-3 years which we have long tracked test. Those who also say it last for 3-7 years are mostly deceitful ,trust that this is not truth and only We have enough strength to make i
We believe that this is THE BEST Coating on the market of the World.
Short-term Test Guidelines:
Most products on the market do not make much difference about hardness, hydrophobicity, gloss after full application in 1-2 months.
Most products on the market do not make much difference about hardness, hydrophobicity, gloss after full application in 1-2 months.
Long-term Test Guidelines:
Durability and hydrophobic effect. Ultima Graphene provides protection for at least 3-5 years and super-hydrophobicity for about 2-3 years which we have long tracked test. Those who also say it last for 3-7 years are mostly deceitful ,trust that this is not truth and only We have enough strength to make i
Product Description
Product Name | Ultima Graphene 9H |
Main Ingredient | · 9H · 36-60 months · Extremely high gloss finish · Unprecedented hydrophobic durability · Water spotting resistance · Scratch resistance · Anti-Graffiti · Super hydrophobic effect · Weather & UV resistance · Advanced chemical resistance · Oxidation & Corrosion resistance |
Function | Protect car body |
Volume | 50ML, packed with box |
Step by step instructions:
Step by step instructions:
1.Mask off areas you do not wish to coat or which may be sensitive to solvents.
6.During the curing process of the initial 24 hours, please do NOT have water spots on the surface to impact the coating performance. If you notice any water drops on the surface, please remove it at once. Within the following 5 days (optimum for 7 days) the vehicle should not cleaned as complete curing takes at least 4 days (depends on the temperature and the humidity), otherwise the finish may be damaged, especially if a drive through car wash is used.
1.Mask off areas you do not wish to coat or which may be sensitive to solvents.
2.If the target car/motor surfaces have swirl marks and micro scratches, a polishing work is needed prior to application of the coating.
3.Pre-Cleaning
First, meticulously pre-clean the car paint and the rims, for this you may use a standard cleaner (free of waxes, oils, silicones). The better you perform the pre-cleaning, the better the adhesion and subsequent longevity of the coating.
After completion of the general cleaning process, degrease the surfaces thoroughly with alcohol (e.g. at least 80% isopropyl), so that all contaminates are removed from the surface. The use of a clay bar cleaning process is also suitable. The simple message is that the coating should only be applied to surfaces which are free of contamination.
First, meticulously pre-clean the car paint and the rims, for this you may use a standard cleaner (free of waxes, oils, silicones). The better you perform the pre-cleaning, the better the adhesion and subsequent longevity of the coating.
After completion of the general cleaning process, degrease the surfaces thoroughly with alcohol (e.g. at least 80% isopropyl), so that all contaminates are removed from the surface. The use of a clay bar cleaning process is also suitable. The simple message is that the coating should only be applied to surfaces which are free of contamination.
4.Application of the coating
Use a coating sponge covered with the thin and smooth micro-fiber suede to apply the finish.
Completely moisten the cloth with ceramics coating. Apply the finish swiftly and evenly by wiping (First apply it horizontally, and then vertically, with a “#” pattern, a 50x50 cm application area is recommended).
Use a coating sponge covered with the thin and smooth micro-fiber suede to apply the finish.
Completely moisten the cloth with ceramics coating. Apply the finish swiftly and evenly by wiping (First apply it horizontally, and then vertically, with a “#” pattern, a 50x50 cm application area is recommended).
5.Buffing/Polishing the coating
Polish the coated surface 1-3 minutes after the body panel has been coated. Do not use excessive pressure. Use a medium to smooth micro-fiber cloth. Do not wait longer than 3 minutes before this first buffing action. You must ensure not to aggressively remove too much of the finish. Ensure that all streaks or smudges are removed. If for some reason you delayed the polishing process, and “high spots” occur, immediately apply another layer of the finish, this will soften the layer below, and you may polish anew. Finish the buffing with a fine soft “peach skin” texture micro-fiber towel.
In warm conditions the coating becomes dust dry after 2 hours and touch dry after 5 hours. After this, the finishing will be dry enough that you may use the vehicle again but the coating is still far from being fully cured and so avoid brushing against the surface with bags or keys.
The coating will cure faster if the surface is hot and so it will be advantageous to place the car in direct sunlight after the first 2 hours of curing.
Polish the coated surface 1-3 minutes after the body panel has been coated. Do not use excessive pressure. Use a medium to smooth micro-fiber cloth. Do not wait longer than 3 minutes before this first buffing action. You must ensure not to aggressively remove too much of the finish. Ensure that all streaks or smudges are removed. If for some reason you delayed the polishing process, and “high spots” occur, immediately apply another layer of the finish, this will soften the layer below, and you may polish anew. Finish the buffing with a fine soft “peach skin” texture micro-fiber towel.
In warm conditions the coating becomes dust dry after 2 hours and touch dry after 5 hours. After this, the finishing will be dry enough that you may use the vehicle again but the coating is still far from being fully cured and so avoid brushing against the surface with bags or keys.
The coating will cure faster if the surface is hot and so it will be advantageous to place the car in direct sunlight after the first 2 hours of curing.
6.During the curing process of the initial 24 hours, please do NOT have water spots on the surface to impact the coating performance. If you notice any water drops on the surface, please remove it at once. Within the following 5 days (optimum for 7 days) the vehicle should not cleaned as complete curing takes at least 4 days (depends on the temperature and the humidity), otherwise the finish may be damaged, especially if a drive through car wash is used.
Certificate
Certificate introduction
Certificate introduction
Certificate introduction
Packing & Delivery
Company Introduction
Shenzhen Hayden Technology Co., Ltd have 8 years of coating development experience in the industry.
Focusing on the research and development and application of high-end crystal plating, with top Chinese research team and technology.We have a complete production line, technology, sales and marketing system 7 years ago, we provided liquid and technical support to some big brands in Europe, America, Japan and South Korea. They are all very satisfied with our products and are still cooperating.
We always provide your customers with the best products and we believe we are doing the right thing.
WhatsApp/WeChat: +86-13723445791
FAQ
Q1: Do you provide samples?
A1: We can provide 1 bottle of unlabeled sample, but since this is a flammable liquid product, it is a dangerous product, and the express fee is high, and we do not pay the shipping fee. We recommend that you match by MOQ or contact our sales manager.
Q2: Can I do OEM/ODM?
A2: Yes, we will make branding, logo and packaging according to your requirements.
Q3: What other products do you have?
A3: Besides auto ceramic coating products, we also have other auto care products, and we are doing more.
Q4: Why do we choose you? What are your strengths?
A4: We have nearly 8 years of production experience in this field and are a professional supplier for well-known customers. Our facilities meet standard audit requirements and our products comply with the certification terms of different countries and regions.we have the best coating in the world .
Q5: Are you a manufacturer?
A5: Yes, we are a manufacturer and have our own factory.
Q6: What is your product packaging?
A6: For liquid products, we pack in cartons or cartons.
Q7: What is your shipping method?
A7: By sea, express or your freight forwarder.
Q8: Can I be your agent?
A8: Yes, we welcome general agents all over the world. Click "Contact Supplier" now for more details
A1: We can provide 1 bottle of unlabeled sample, but since this is a flammable liquid product, it is a dangerous product, and the express fee is high, and we do not pay the shipping fee. We recommend that you match by MOQ or contact our sales manager.
Q2: Can I do OEM/ODM?
A2: Yes, we will make branding, logo and packaging according to your requirements.
Q3: What other products do you have?
A3: Besides auto ceramic coating products, we also have other auto care products, and we are doing more.
Q4: Why do we choose you? What are your strengths?
A4: We have nearly 8 years of production experience in this field and are a professional supplier for well-known customers. Our facilities meet standard audit requirements and our products comply with the certification terms of different countries and regions.we have the best coating in the world .
Q5: Are you a manufacturer?
A5: Yes, we are a manufacturer and have our own factory.
Q6: What is your product packaging?
A6: For liquid products, we pack in cartons or cartons.
Q7: What is your shipping method?
A7: By sea, express or your freight forwarder.
Q8: Can I be your agent?
A8: Yes, we welcome general agents all over the world. Click "Contact Supplier" now for more details
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
