A3 Laser Printer Scanner Copier Printer Scanner All In One Ca non IRC5250/ 5255 / IRC3320 / C 3330 / IRC5535/ 5540 / IRC5550/
- Category: >>>
- Supplier: Hunan Xinyin Qidian Media Co. Ltd.
Share on (1600540587274):
Product Overview
Description
Product Description
Product Name | Used Copier Machines for Canon ImagePRESS 710 / 810 / 910 | |
Package | Bubble bag with seal + Wodden frame | |
Advantages | Import and remanufactured directly, without middle man | |
Standards | New appearance, original parts, perfect printing quality | |
Feature | Remanufactured | |
Brands | Canon Brands All series, Need Other Brands Click Here | |
In stock Model Click Here | ||
Product Paramenters
Model Number | ImagePRESS 710 / 810 / 910 | ||||||
C910 | C810 | C710 | |||||
Print speed | up to 90 ppm | up to 80 ppm | up to 70 ppm | ||||
Recommended monthly volume | 40,000 to 167,000 pages (A4) | 30,000 to 167,000 pages (A4) | 15,000 to 125,000 pages (A4) | ||||
Maximum monthly peak volume | Up to 500,000 pages (A4) | Up to 400,000 pages (A4) | Up to 350,000 pages (A4) | ||||
Registration tolerance | Front to Back: 1.0mm or less | ||||||
Printing method | Colour Laser Beam Printing | ||||||
Print resolution | Up to 2,400 dpi x 2,400 dpi, 256 gradations | ||||||
Max paper input capacity | 7,650 sheets (A4/A3, 80 gsm) | ||||||
Max paper output capacity | 11,200 sheets (A4, 80 gsm) | ||||||
Supported media weights | Cassettes: 52 to 300 gsm Multi-purpose tray/: 52 to 350 gsm Optional paper decks Duplex: 52 to 350 gsm | ||||||
Warm-up time | Approx. 360 seconds | ||||||
Interface type | USB 2.0 Hi-speed Ethernet: 1000 BaseT/100Base -TX/10Base-T Standard: 1 x USB Host *1 on left side of PRISMAsync operation pane | ||||||
Network protocols | TCP/IP* (LPD/Port 9100/WSD/IPP/IPPS/SMB/ FTP), IPX/SPX (NDS, Bindery), AppleTalk *IPv4/IPv6 support | ||||||
Processor speed | 1.66 GHz (SOC ARM 1136JF-S 400 MHz, ARM 946 200 MHz) | ||||||
Memory | 1.5 GB (SOC 2 GB) | ||||||
Hard disk drive | Standard 1 TB Hard Disk Drive | ||||||
Dimensions (W x D x H) | 1,952 mm* x 934 mm x 1,433 mm** (W x D x H) * Includes optional Control Panel and Copy Tray-R2 * Includes Upright Control Panel-G1 (If Operating Panel-A5 and Operator Attention Light-D1 are attached, total height is 1,712 mm) | ||||||
Minimum Installation space (W x D) | 1,952 (W) x 1,524 (D) mm | ||||||
Weight | Approx 316 kg *includes ADF | ||||||
Scan resolution | Copy: 600 dpi x 600 dpi Send: 600 dpi x 600 dpi / 300 dpi x 300 dpi | ||||||
Copy resolution | Reading: 600 dpi x 600 dpi Printing: 2,400 dpi x 2,400 dpi | ||||||
FAQ
There are some common question you may want to know:
Re-manufacturing Standard:
1. Appearance
No rust, cracks, running paints, scratch, burrs or other obvious defects.
2. Toner
At least remain 30% capacity of original toner in each cartridge;
3. Cleaning
Whole machine must disassemble, clean all parts and assembly again;
4. Pick-up Roller Unit
Check each roller carefully, over-worn will be replaced. Each tray must pass 100 pages A4 plain paper test;
5. Drum Unit
Check each drum unit consumable carefully, over-worn will be replaced. Pass 30% gray color print test;
6. Developer Unit
Pass 30% gray color print test, and will be replaced the corresponding accessories if any obvious defects found.
7. Transfer Unit
Check each transfer unit consumable carefully. Pass 30% gray color print test.
8. Fuser Unit
Check each fuser unit consumable carefully, over-worn will be replaced. Pass 200g A3 size coated paper test.
What will be Meter Count ?
A: Before we debugging the copiers, we will reset the counter meter; After that, our technician have to debug and test the copier by print our quality, and test at least 100 pages for each tray.
So the final counter meter will showing around 400-500 pages around.
All consumables are new OEM or Compatible ?
A: We don't replace all consumables. Our technician will print out some pages, they will check the condition of the machine according to the printing effect. If the original part is working fine, they will keep them. If not, they will replace them by compatible type.
Re-manufacturing Standard:
1. Appearance
No rust, cracks, running paints, scratch, burrs or other obvious defects.
2. Toner
At least remain 30% capacity of original toner in each cartridge;
3. Cleaning
Whole machine must disassemble, clean all parts and assembly again;
4. Pick-up Roller Unit
Check each roller carefully, over-worn will be replaced. Each tray must pass 100 pages A4 plain paper test;
5. Drum Unit
Check each drum unit consumable carefully, over-worn will be replaced. Pass 30% gray color print test;
6. Developer Unit
Pass 30% gray color print test, and will be replaced the corresponding accessories if any obvious defects found.
7. Transfer Unit
Check each transfer unit consumable carefully. Pass 30% gray color print test.
8. Fuser Unit
Check each fuser unit consumable carefully, over-worn will be replaced. Pass 200g A3 size coated paper test.
What will be Meter Count ?
A: Before we debugging the copiers, we will reset the counter meter; After that, our technician have to debug and test the copier by print our quality, and test at least 100 pages for each tray.
So the final counter meter will showing around 400-500 pages around.
All consumables are new OEM or Compatible ?
A: We don't replace all consumables. Our technician will print out some pages, they will check the condition of the machine according to the printing effect. If the original part is working fine, they will keep them. If not, they will replace them by compatible type.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
