copper cathode 99.99% copper cathodes sheet prime quality / Brass Plate (1600547230202)

Share on:

Price:$9.00 - $18.00
Price in USD:Details


Product Overview


laminate 3mm 3080 gpu 1.5mm red yellow 20mm thickness 5mm brass 10mm thick copper plate

Brass material is called a special Brass if it is a plurality of alloys composed of two or more elements. Brass has strong wear resistance. Special Brass is also called special Brass, which has high strength, high hardness and strong chemical resistance. Also, the mechanical properties of the cutting process are also prominent. The seamless Brass tube drawn from Brass is soft and wear resistant. Manufacture of sheet, strip, bar, pipe, cast parts, etc. Containing Brass in 62%~68%, strong plasticity, manufacturing pressure-resistant equipment.

Products Description

JIS H3250-2006,ASTM B152M,GB/T2040-2008,etc
Length:1m~12m or as required.
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required
1)Further making utensil.
2)Solar reflective film
3)The appearance of the building
4)Interior decorating:ceilings,walls,etc.
5)Furniture cabinets
6)Elevator decoraction
7)Signs,nameplate,bags making.
8)Decorated inside and outside the car
9)Household appliances:refrigerators,microwave ovens,audio equipment,etc.
10)The consumer electronics:mobile phones,digital cameras,MP3,U disk,etc.
Standard export seaworthy package or as required.
Flat plate . Flat bar , Strip, Coil

The classification of the copper
Pure copper
Pure copper is called red copper, also known as red copper, it has good plasticity, excellent electrical conductivity, thermal conductivity, can be applied to hot pressing, cold pressing processing, widely used in cable, wire, electric spark special corrosion copper and other products.
The brass
Brass refers to the alloy of zinc and copper, also can be divided into ordinary brass and special brass. Ordinary brass with 39% zinc content as the dividing line, less than 39%, good plasticity, usually suitable for hot and cold compression processing. More than 39%, suitable for hot pressing.
Red copper is copper with a high content of copper, the total content of other impurities is less than 1%, the density is 8.96, melting point is 1083℃. According to the composition, Chinese copper processing materials can be divided into four categories: ordinary copper (T1, T2, T3, T4), oxygen-free copper (TU1, TU2 and high purity, vacuum oxygen-free copper), deoxidized copper (TUP, TUMn), and special copper with a small amount of alloying elements (arsenic-copper, telluric-copper, silver-copper).
Bronze refers to copper base alloy except copper nickel, copper zinc alloy, the main varieties are tin bronze, aluminum bronze, special bronze (also known as high copper alloy).
White copper, namely nickel as the main element of the copper alloy. Cu-ni binary alloy is called ordinary white copper; And white copper is divided into ordinary copper nickel binary alloy, and added iron, zinc, aluminum, manganese complex white copper.
Tungsten copper
Tungsten copper alloy has a wide range of applications, mainly used to manufacture arc ablation resistant high voltage switch contacts and rocket nozzle throat lining, tail rudder and other high temperature components, but also used for electrical processing electrode, high temperature mold and other requirements of electrical conductivity and high temperature use.

Company Profile

Product packaging

Standard export seaworthy package,suit for all kinds of transport, or as required.
Water-proof Paper + Edge protection + Wooden Pallets
1*20ft container load Max. 25 Ton, Max. length 5.8m
1*40ft container load Max. 25 Ton, Max. Length 11.8m


widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative


Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.
Q2: what is the terms of delivery?
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit. For production period,it usually takes about 15 days-30 days after receiving the deposit.
Q5: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.
Q6: How could you guarantee your products?
A: Each piece of products is manufactured by certified workshops, inspected by Lenser piece by piece
according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.

0.0131 s.