Professional Supply High Quality Waterproof 200 Color Flexible Waterproof Coating
- Category: Waterproofing Materials >>>
- Supplier: Tangshan Zhuozhan Trading Co. Ltd.
Share on (1600548202030):
Product Overview
Description
Product Description
Product introduction
Yuhong 200 color flexible waterproof coating is based on acrylate emulsion and various additives.
It is a two-component water-based waterproof coating with a certain proportion of inorganic powder composed of special cement and various fillers. coating.
Executive standard
JCT 2415-2017 "Waterproof Coating Film for Ceramic Tile Bonding Layer"
Proportion and dosage
Liquid material: powder material-10: 25 (weight ratio);
1mm thick coating requires about 2.1~2 3kg/m' of slurry
Coating color
Blue
Scope of application
Mainly promoted parts: backwater protection for family kitchens, renovated bathrooms in old houses, walls and basements
Tide treatment:
●Second push part: closed balcony. Waterproof construction of indoor walls.
Basic processing and requirements
●The base layer should be flat, firm, dry, free of clear water, floating ash and sand. No oil and other
Defects such as loose animals;
●Before waterproof construction, the base layer must be fully moistened with water to a saturated state, but there should be no clear water;
●Slotting parts and holes and cracks of pipelines. It is recommended to use Yuhong plugging treasure to smooth and repair the parts. reason;
●If the base layer is loose and sandy, it is recommended to use Yuhong reinforcing agent to reinforce the base layer with rubber. construction technology
●Ingredients: - bag liquid material and - bag powder material, first pour the liquid material into the mixing bucket, slow down while stirring
Slowly add the powder and mix with an electric mixer until homogeneous. There are no lumps.
●In order to improve the construction effect, this product can be added with an appropriate amount of water, and the amount of water added to the whole barrel should not exceed 500ml.
●Detailed node processing: Before painting the large surface, the leaky parts such as floor drains, yin and yang corners, and pipe roots need to be cleanedUse Yuhong plugging treasure to carry out arc-strengthening treatment (the diameter is about 30-50mm, so as not to affect the reartiling shall prevail), and then use waterproof paint for node painting and grid cloth paving;
●Large-scale painting: The waterproof coating should be painted two to three times, and the next work can be carried out after each coating is dry.sequence, the time interval is 3-6 hours (subject to touch not sticky hands), low temperature or humid environmental conditionsThe drying time should be extended appropriately. The thickness of the waterproof layer coating should not be less than 1.2 mm on the wall and 1.5 mm on the ground. The method of "cross brushing" should be used during construction;
Transportation and storage
●Stored in a cool and dry place, and insulation measures should be taken when it is lower than 5C;
Under normal storage conditions, the shelf life of unopened products is 12 months;
●This product is non-flammable and explosive material and can be transported as general cargo. Rain and sun exposure should be prevented during transportation. Freeze, avoid squeezing. bump, keep the packaging intact.
●Maintenance and closed water test: After the waterproof coating film is dry, it is recommended to carry out watering or spray maintenance.
The time should not be less than 48 hours, and the closed water test can be carried out after curing, and the closed water time should not be less than 24 hours.After the acceptance is passed, the protective isolation layer shall be constructed according to the design requirements.
Precautions
●The temperature during construction should be between 5C and 35C. In strong wind or rain and snow, outdoor construction is prohibited;The prepared paint should be used within 1 hour, and it is strictly forbidden to add water again during the brushing process; During the batching process, it is strictly forbidden to add excessive water or add any other materials;
●Unused liquid or powder after opening. It should be sealed and stored;
●During the construction process, pay attention to protect the waterproof coating film from damage;
●It is recommended to use Yuhong tile glue when laying tiles on the waterproof layer;
●This product contains alkaline substances such as cement. It may cause skin allergies. Take precautions when using it
Shi;
●In case of contact with eyes, rinse immediately with water. If you have any unpleasant reaction, you should seek medical attention immediately.
Yuhong 200 color flexible waterproof coating is based on acrylate emulsion and various additives.
It is a two-component water-based waterproof coating with a certain proportion of inorganic powder composed of special cement and various fillers. coating.
Executive standard
JCT 2415-2017 "Waterproof Coating Film for Ceramic Tile Bonding Layer"
Proportion and dosage
Liquid material: powder material-10: 25 (weight ratio);
1mm thick coating requires about 2.1~2 3kg/m' of slurry
Coating color
Blue
Scope of application
Mainly promoted parts: backwater protection for family kitchens, renovated bathrooms in old houses, walls and basements
Tide treatment:
●Second push part: closed balcony. Waterproof construction of indoor walls.
Basic processing and requirements
●The base layer should be flat, firm, dry, free of clear water, floating ash and sand. No oil and other
Defects such as loose animals;
●Before waterproof construction, the base layer must be fully moistened with water to a saturated state, but there should be no clear water;
●Slotting parts and holes and cracks of pipelines. It is recommended to use Yuhong plugging treasure to smooth and repair the parts. reason;
●If the base layer is loose and sandy, it is recommended to use Yuhong reinforcing agent to reinforce the base layer with rubber. construction technology
●Ingredients: - bag liquid material and - bag powder material, first pour the liquid material into the mixing bucket, slow down while stirring
Slowly add the powder and mix with an electric mixer until homogeneous. There are no lumps.
●In order to improve the construction effect, this product can be added with an appropriate amount of water, and the amount of water added to the whole barrel should not exceed 500ml.
●Detailed node processing: Before painting the large surface, the leaky parts such as floor drains, yin and yang corners, and pipe roots need to be cleanedUse Yuhong plugging treasure to carry out arc-strengthening treatment (the diameter is about 30-50mm, so as not to affect the reartiling shall prevail), and then use waterproof paint for node painting and grid cloth paving;
●Large-scale painting: The waterproof coating should be painted two to three times, and the next work can be carried out after each coating is dry.sequence, the time interval is 3-6 hours (subject to touch not sticky hands), low temperature or humid environmental conditionsThe drying time should be extended appropriately. The thickness of the waterproof layer coating should not be less than 1.2 mm on the wall and 1.5 mm on the ground. The method of "cross brushing" should be used during construction;
Transportation and storage
●Stored in a cool and dry place, and insulation measures should be taken when it is lower than 5C;
Under normal storage conditions, the shelf life of unopened products is 12 months;
●This product is non-flammable and explosive material and can be transported as general cargo. Rain and sun exposure should be prevented during transportation. Freeze, avoid squeezing. bump, keep the packaging intact.
●Maintenance and closed water test: After the waterproof coating film is dry, it is recommended to carry out watering or spray maintenance.
The time should not be less than 48 hours, and the closed water test can be carried out after curing, and the closed water time should not be less than 24 hours.After the acceptance is passed, the protective isolation layer shall be constructed according to the design requirements.
Precautions
●The temperature during construction should be between 5C and 35C. In strong wind or rain and snow, outdoor construction is prohibited;The prepared paint should be used within 1 hour, and it is strictly forbidden to add water again during the brushing process; During the batching process, it is strictly forbidden to add excessive water or add any other materials;
●Unused liquid or powder after opening. It should be sealed and stored;
●During the construction process, pay attention to protect the waterproof coating film from damage;
●It is recommended to use Yuhong tile glue when laying tiles on the waterproof layer;
●This product contains alkaline substances such as cement. It may cause skin allergies. Take precautions when using it
Shi;
●In case of contact with eyes, rinse immediately with water. If you have any unpleasant reaction, you should seek medical attention immediately.
Specification
Product name | 200 Color Flexible Waterproof Coating |
Warranty service | 1 year |
Application scenarios | Hotel，villa，office building，hospital，school，mall，sports venns |
Product use | Used for waterproofing of buildings |
Construction ratio | Liquid: powder =10:25 |
Executive standard | JC/T 2415-2017 |
Company Profile
Our Advantages
Certifications
Packing & Delivery
FAQ
1. What's your Minimum order quantity(MOQ) of your product?
1x20"GP, small orders can be negotiated.
2. What terms of payment you use?
We'd like you to pay us by T/T.
3. How do you guarantee the quality of your product?
We have strict QC inspection in each process. There are test reports for our products. All our products meet industry standards.
1x20"GP, small orders can be negotiated.
2. What terms of payment you use?
We'd like you to pay us by T/T.
3. How do you guarantee the quality of your product?
We have strict QC inspection in each process. There are test reports for our products. All our products meet industry standards.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
