JIMDOA Nail Drill Rechargeable 35000rpm Custom LOGO Portable Nail Drill Strong motor Professional electric Nail Equipments
- Category: >>>
- Supplier: Foshan Jimdoa Electric Appliance Co. Ltd.
Share on (1600550757798):
Product Overview
Description
This is a nail drill get a feminine design with a noble sense. The peaceful ocean with the
half-exposed rainbow and the crystal clear with sparkling gems represent our brand tonality. It fully expresses the brand
connotation through the feminine light luxury space.
half-exposed rainbow and the crystal clear with sparkling gems represent our brand tonality. It fully expresses the brand
connotation through the feminine light luxury space.
Portable
Feel fully Sander function
1. Small sizeeasy to carry
2. Retro dashboard display
3. Long battery life
4. Adjustable Speed And Direction
5. low noiseHigh speed
6. Low Vibration
Simple Guideline
1. SPEED
Rotate the dial to adjust the desired speed
2. Handpiece cable
3. BATTERY INDICATORS
Lighting changes with work
4. HANDPIECE HOLDER
5. CLIP
6. Forward/Reverse
7. Power/Stop
Long Press For Two Seconds To Power OnPress once to be in standby mode
8. OEMLogo
9. Handpiece
10. Bits
Convenient charging
light weight and convenient30w power, 15 hours of battery life
Back Clip Portable
Strong Clip, Not Easy To Fall OffSmall Occupied Space
Hollow Cup Motor Quiet Performance
Amazing heat dissipation with copper enameled wire inside the motor. Metal polished pen body with no paint peeling, luxury and glossy.
rechargeable Nail Polisher
Long-lasting battery life Vintage Retro Design
35000RPM Retro Dashboard Display
35000RPM Retro Dashboard Display
Feel fully Sander function
1. Small sizeeasy to carry
2. Retro dashboard display
3. Long battery life
4. Adjustable Speed And Direction
5. low noiseHigh speed
6. Low Vibration
Simple Guideline
1. SPEED
Rotate the dial to adjust the desired speed
2. Handpiece cable
3. BATTERY INDICATORS
Lighting changes with work
4. HANDPIECE HOLDER
5. CLIP
6. Forward/Reverse
7. Power/Stop
Long Press For Two Seconds To Power OnPress once to be in standby mode
8. OEMLogo
9. Handpiece
10. Bits
Convenient charging
light weight and convenient30w power, 15 hours of battery life
Back Clip Portable
Strong Clip, Not Easy To Fall OffSmall Occupied Space
Hollow Cup Motor Quiet Performance
Amazing heat dissipation with copper enameled wire inside the motor. Metal polished pen body with no paint peeling, luxury and glossy.
Ps: In order to protect the motor, please avoid overuse.
Products Description
Product Name | Nail Drill |
MODEL | JMD-168 |
Material | ABS+Aluminium |
Plugs Type | EU/US/UK/AU |
Power | 30W |
Output Voltage | AC 15V |
Input Voltage | AC 100V-240V 50/60Hz |
Speed | 0-35000RPM |
Color | White/Green/Blue |
Main Controller Size | 166*116* 66mm |
Handpiece Size | 136mm * 26mm |
Single package size | 17.8*13.8*8cm |
Single gross weight | 0.8kg |
Carton Meas | 37.7*30.3*44cm |
GW | 15.6kg |
Package Type | 16pcs/ctn |
Parts List | 1 x Main Machine 1 x Handpiece 1 x Base 4 x Drill Bits 1 x User Manual (English) 1 x USB-Type-C Fast Charge Cable |
Feature display
1. Retro Dashboard Design
Visible Speed Accurate Speed Regulator With Slight Touch
Visible Speed Accurate Speed Regulator With Slight Touch
2. Portable Charging
3 hours of charging, 15 hours of battery life Multiple Battery Protection Battery overheating protection
Overload system protection
Overload system protection
3.Adjustable Speed Retro Dashboard Design
Visible Speed Accurate Speed Regulator With Slight Touch
4. Forward/Reverse
Power/Stop
Long Press For Two Seconds To Power On Press once to be in standby mode
Long Press For Two Seconds To Power On Press once to be in standby mode
4. Forward/Reverse
Power/Stop
Long Press For Two Seconds To Power On
Long Press For Two Seconds To Power On
Press once to be in standby mode
5. High speed but low noise
High-speed motor, the maximum speed is 35000rpmThe lowest decibel is 50HZ
High-speed motor, the maximum speed is 35000rpmThe lowest decibel is 50HZ
Equipped with four grinding heads
Can be equipped with 2.35mm grinding head
1. Cuticle Cleaner Safety Bit
The cuticle cleaner bit perfect for cleaning and prepping the cuticle area to avoid lifting at the nail bed. It prepares the
cuticle area without damaging your client's nail so acrylic, gel or powder dip will last longer.
2. Ball Shape Bit
Ball shape bit is used to clean or remove any hard skin around the nail. It may even be used to remove loose cuticle around the nails.
3. Cone Bit
The cone bit has several purposes. It can clean under the nail, cuticle area and sidewalls. Although the cone bit is also used for
over the nail shaping on your toes, it’s probably best to skip shaping the fingernails with this bit.
4. Barrel Bit
Barrel bits are the best bit to backfill cutting, shorten and shape the nails! Just remember not to use this bit in the cuticle
area. It’s not fun and very damaging..
1. Cuticle Cleaner Safety Bit
The cuticle cleaner bit perfect for cleaning and prepping the cuticle area to avoid lifting at the nail bed. It prepares the
cuticle area without damaging your client's nail so acrylic, gel or powder dip will last longer.
2. Ball Shape Bit
Ball shape bit is used to clean or remove any hard skin around the nail. It may even be used to remove loose cuticle around the nails.
3. Cone Bit
The cone bit has several purposes. It can clean under the nail, cuticle area and sidewalls. Although the cone bit is also used for
over the nail shaping on your toes, it’s probably best to skip shaping the fingernails with this bit.
4. Barrel Bit
Barrel bits are the best bit to backfill cutting, shorten and shape the nails! Just remember not to use this bit in the cuticle
area. It’s not fun and very damaging..
Installation Steps
4 easy steps to replace the grinding head
Ps: In order to protect the life of the motor, please do not work for a long time. After using it for 30~60min, take a break and wait for the handle temperature to drop to normal temperature before use.
1. Rotate the pattern part to the left to loosen the chuck
2. Remove the original grinding head upwards
3. Replace the grinding head that needs to be replaced
4. Rotate the pattern part to the right, lock the grinding head, and it can be plugged in and used.
Ps: In order to protect the life of the motor, please do not work for a long time. After using it for 30~60min, take a break and wait for the handle temperature to drop to normal temperature before use.
1. Rotate the pattern part to the left to loosen the chuck
2. Remove the original grinding head upwards
3. Replace the grinding head that needs to be replaced
4. Rotate the pattern part to the right, lock the grinding head, and it can be plugged in and used.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
