Motor oil additive OV 10L
- Category: >>>
- Supplier: Individual Entrepreneur Eremenko Oleg Eduardovich
Share on (1600564446211):
Product Overview
Description
Product Description
Engine oil additive
OV-10L designed specifically for internal combustion engines with an engine capacity of 3.9 - 6.5 liters
The product represents a suspension of mineral components (in the form of highly homogenized powders, by luminescent paint with strictly defined granulometric and moisture properties) in organic carriers (mineral and synthetic oils, viscosifiers, lubricants, etc.)
For internal combustion engines running on any type of fuel: gasoline, diesel, gas
Applications for internal combustion engines (ICEs):
The product shall be injected through the oil filler tube of a warmed-up engine at a rate of 1-2 ml per 1,000 cm³ of cubic
capacity (depending on the technical condition to be ascertained by a primary diagnostic, having preliminary been stirred in 100 ml of the oil being used in that particular ICE). After the modifier of mechanical systems has been injected, the engine must be let run idle for at least 40-45 min. to enable the formation of a modified coat. The standard treatment is when done twice.
Applications for internal combustion engines (ICEs):
The product shall be injected through the oil filler tube of a warmed-up engine at a rate of 1-2 ml per 1,000 cm³ of cubic
capacity (depending on the technical condition to be ascertained by a primary diagnostic, having preliminary been stirred in 100 ml of the oil being used in that particular ICE). After the modifier of mechanical systems has been injected, the engine must be let run idle for at least 40-45 min. to enable the formation of a modified coat. The standard treatment is when done twice.
Product Advantages
Effect after the application:
2) Increases the engine compression from 20 to 35%;
3) Reduces the burning oil consumption;
4) Increases the engine power by 3 – 5%;
5) Improves the machinery wear resistance 2 – 3 times;
6) Decreases gaps in movable interfaces of worn friction units;
7) Reduces the emission of harmful substances into the atmosphere;
8) Facilitates the engine cold start, removes the cold start wear;
9) Reduces the operation vibration and noise;
10) Restores the operating parameters of mechanisms of engines up to the level of rated values and higher.
7) Reduces the emission of harmful substances into the atmosphere;
8) Facilitates the engine cold start, removes the cold start wear;
9) Reduces the operation vibration and noise;
10) Restores the operating parameters of mechanisms of engines up to the level of rated values and higher.
THE RESULTS ATTAINED PERSISTS: OVER 100,000 – 150,000 km or 2,000 – 2,500 engine hours
Specification
item | value |
Place of Origin | Russian Federation |
Province | St. Petersburg |
Brand Name | Main Element |
Type | Greases |
General Composition | Additives |
Model Number | OV-10L |
For internal combustion engines capacity | 3.9 - 6.5 liters |
Type of fuel | Gasoline, diesel, gas |
Product name | Motor oil additive |
Kinematic viscosity (100℃) | 30-150 mm²/sec |
Density | 950 kg/m³ |
Dispersed phase mass fraction | in the range of 1.5-20% |
Mass fraction of water | no mo than 0.5% |
Pour point | not lower than -20°C |
Appearance | A suspension |
Packing & Delivery
carton boxes, stretch film, wood pallets
Recommend Products
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
