L298n Mode H Bridge Driver Board Mode For Stepper Motor Smart Car Robot Dc Stepper Motor Driver Controller Board
- Category: >>>
- Supplier: Acebott Stem Education Tech Co. Ltd.
Share on (1600566868460):
Product Overview
Description
Products Description
L298n Mode H Bridge Driver Board Mode For Stepper Motor Smart Car Robot Dc Stepper Motor Driver Controller Board
Specification:
Mode name:dual H bridge motor drive mode
Work mode:H bridge drive (double road)
Main control chip:L298N
Packaging:electrostatic bag
Logical voltage:5V
Drive voltage:5v-35v
Logical current:0mA-36mA
Driving current:2A(MAX single bridge)
Storage temperature:- 20 ℃ to + 135 ℃
Maximum power:25W
Weight:30 g
Peripheral dimension:43*43*27mm
Features:
This mode USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.
Through this mode can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regator
chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
This mode USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Notes:
1. When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can
make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v
The power supply does not input voltage, but can yield 5V voltage for external use.
2. When the driving voltage is higher than 12V, it is less than or equal to 24V
(the chip manual proposes to support 35V, but according to the book
When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a
rated voltage of 18V shall be driven.
3.You must first remove the board 5V output to enable the jumper cap. Then 5V is accessed outside the 5V output port
The 5V enables the power to be a control signal with a level of 5V. When the signal input is valid, and when the power supply is
normal in the motor drive mode, the motor drive mode outputs the current. Otherwise, even if the power supply is normal, there is
no current on the motor.
Voltage to L298N internal logic circuit power supply. (this is a high-pressure, unconventional app!)
package includes:
1×motor drive mode
Mode name:dual H bridge motor drive mode
Work mode:H bridge drive (double road)
Main control chip:L298N
Packaging:electrostatic bag
Logical voltage:5V
Drive voltage:5v-35v
Logical current:0mA-36mA
Driving current:2A(MAX single bridge)
Storage temperature:- 20 ℃ to + 135 ℃
Maximum power:25W
Weight:30 g
Peripheral dimension:43*43*27mm
Features:
This mode USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.
Through this mode can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regator
chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
This mode USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Notes:
1. When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can
make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v
The power supply does not input voltage, but can yield 5V voltage for external use.
2. When the driving voltage is higher than 12V, it is less than or equal to 24V
(the chip manual proposes to support 35V, but according to the book
When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a
rated voltage of 18V shall be driven.
3.You must first remove the board 5V output to enable the jumper cap. Then 5V is accessed outside the 5V output port
The 5V enables the power to be a control signal with a level of 5V. When the signal input is valid, and when the power supply is
normal in the motor drive mode, the motor drive mode outputs the current. Otherwise, even if the power supply is normal, there is
no current on the motor.
Voltage to L298N internal logic circuit power supply. (this is a high-pressure, unconventional app!)
package includes:
1×motor drive mode
FAQ
Are you manufacturer ? | Yes, we are manufacturer. | ||||||
How long is your delivery time? | Normally 3-5 working days after payment; Special requirement orders, delivery time is negotiable. | ||||||
If the products can't work after receiving it, what should I do? | We will replace new items for you at once and then we make the judgement for the issue. | ||||||
What is the warranty? | 1-3 months to replace new items for free. 1-2 years repairing free according to different products. | ||||||
Do you accept OEM design? | Yes, we do. We can design according to your requirement, MOQ usually 2-10. | ||||||
Do you accept pay 30% in advance? | Yes, we do. We can start to prepare your goods when receive 30% payment, and send them after get the rest 70% payment. | ||||||
What payment terms you accept? | We accept Alibaba Trade Assuarce, T/T, PayPal, Western Union, Wechat, Alipay, in Cash (RMB or USD). | ||||||
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
