nitrite/Dissolved Oxygen/ph 3 in 1 aquarium water quality test diagmostic kit

Ammonia Nitrogen Kit Steps:

1. Take a water sample.

2. Add 7 drops of Reagent 1 liquid and shake until homogeneous.

3. Add 7 drops of reagent 2 liquid and shake until uniform.

4. Bika

1.Visual colorimetric method or titration method is used for easy operation.

2.The analysis of a water sample can be completed in 20 seconds, which is rapid and efficient.

3.The results are reliable.

4.All reagents and accessories are built-in and do not need to be prepared separately;

5.The cost of testing is low;

6.Small volume, light weight, easy to carry;

7.It is suitable for real-time field water quality detection of sea and fresh water.

8.Is the most practical, simple screening tool;

9.Instant, on-site, fast, accurate;

optical colorimetry

A. The test tube was washed with the water sample to be tested twice, and then the water sample was added to the calibration line from the test tube to the tube.;

B. According to the operation instructions on the back of the colorimetric card, the reagent was added to the test tube in turn.

C. Shake the test tube to dissolve or mix evenly;

D.After the reaction is complete, the test tube is placed on the edge of the colorimetric card (or white paper), the visual colorimetric effect is better from top to bottom (the monocular colorimetric effect is better), and the color in the tube is the same or similar to the standard color on the colorimetric card.