Поликапролактон/полиморф/Поликарбонат CAS No 24980 41 4 по конкурентоспособной цене
- Category: Other Plastic Raw Materials >>>
- Supplier: T&T Industry (Shenzhen) Co. Ltd.
Share on (1600584829823):
Product Overview
Description
Product Description
PCL material
Polycaprolactone (Polycaprolactone, PCL, CAS no. 24980-41-4) [1] is also known as polygon-caprolactone (polygon-caprolactone), which is a polymer organic polymer formed by cyclic polymerization of the polygon-caprolactone monomer under the catalysis of metal anion complex catalyst.
Different molecular weights can be obtained by controlling the polymerization conditions.
Its appearance is white solid powder, non - toxic, insoluble in water, soluble in a variety of polar organic solvents.PCL has good biocompatibility, good organic polymer compatibility, and good biodegradability. It can be used as a cell growth support material and can be compatible with a variety of conventional plastics. Under natural environment, it can be completely degraded within 6-12 months.
In addition, PCL also has a good shape memory temperature control property, which is widely used in the production and processing of drug carriers, plasticizers, degradable plastics, nano-fiber spinning and plastic materials.
Molecular Weight: 50000 60000 80000
This is a new material can be arbitrary shape, will be available after Polymorph Thermoplastic pour in hot water to soften the hand DIY shape any shape.
This is environmental protection material, reusable, and light weight . Polymorph Thermoplastic about 100 in the temperature will soften, so can easily make it.
Due to heating for Polymorph Thermoplastic features rapid change, from solid white particles into a transparent soft clay.When Polymorph Thermoplastic cooling to room temperature, it become white and as hard as stone model, Polymorph Thermoplastic again after heating and cooling can be reused many times.
So you need is an idea for a start, a bowl of hot water, your hands, you can become a super built.
Product purpose:
This is an ideal new material, can be as a fixer, suitable for DIY enthusiasts, artists, creators, sculptors, machine
manufacturing experts - or anyone who likes making or repairing things!
Storage: please store in a cool and dry place, avoid high temperature drying
Recommendations: please pay attention to when using hot water temperature, should be used more than 12 years old
Special performance:
Melting point: 60 ° C (lit.)
Density: 1.146 g/mL at 25 ° C
1. Heat some water to approximately 150 degrees F.
2. Pour InstaMorph pellets into the water.
3. Wait approximately two minutes or until white InstaMorph pellets turn clear and stick together.
4. Remove from the water and get rid of any remaining liquid between the pellets.
5. Form into desired shape with your hands, tools, molds, or any other means necessary.
6. Once you’ve got your InstaMorph creation finalized, let it cool to room temperature and put it to use. It will turn an opaque
white color when it's fully cooled
It is highly compatible with biological cells, and cells can grow normally on its substrate and degrade into CO2 and H2O.
| Mold Temperature | - | |||
| Front Cylinder Temperature | 70~80℃ | |||
| Middle Cylinder Temperature | 70~80℃ | |||
| Behind Cylinder Temperature | 40~60℃ | |||
| Nozzle Temperature | 70~80℃ | |||
| Melt Temperature | 70~80℃ | |||
PCL powder available too.
Application
Surgical Medical Field
Surgical suture, orthopedic splint, radiation board, resin bandages, dental model, etc.
Polyurethane Resin Field
Coating, ink, hot melt adhesive, non-woven,adhesive, shoes materials, structural adhesive, etc.
Film and Composite Packaging Field
Blown film, laminated material, etc.
Other Field
Manual model, organic colorants, powder coatings, etc.
Related Hot Products
PEI PES PPS PA66 COC PSU PPSU LCP Resin...
Plastic Powder: PA12 / PEEK / PEI /PVDF / ECTFE Powder...
Biodegradable Material: PCL / PHA / PLA / PBAT Granular...
Packaging & Shipping
1. Waterproof Design(Dual package, Waterproof bag Inside)
2. Sealed Packaging,Impact resistant (Kraft paper bag+PE/Aluminum liner)
3. Customized package (25kg/bag or 500kg/bag)
4. Water-proof , Anti-breaking,Anti-extrusion . Anti-heavy throw
5. Transporation by sea, the sample can be shipped by air
Packing:
Sample will ship by DHL,UPS,EMS,ETC.
Company Information
T&T Industry Group Ltd is a customized engineering plastics company combining of R&D, Design, and Project Development. Currently our focus is on the project devlopement and optimal configuration of different resources, based on the actual situation of the One-Belt and One-Road industrialized countries and current new materials development, and world industrialized situation.
FAQ
1.Samples leading time : 1-2 weeks after passed our test;
2.Bulk order leading time : 2-4 weeks ( customized materials ,seldom in stock)
3.Samples are delivered by FEDEX DHL ,TNT , UPS,Samples fee will be refund when the first bulk order comes .
4.Payment Term: T/T or L/C at sight;
5.Minimum Order Quantity: 1 MT
6.Delivery Time: Lead-time is around 7-14 working days after we receive the advance payment. It varies according to different products and quantity.
7.The quality standard refers to the sample. And quality issues we provide free tech-support
Our Services
Consulting--solutions--quotation--sending samples--quality check--placing orders-- customization--deliver goods--after sell services
1.Technical backgroud Sales can provide in-time and professional responses to customers' inquiries.
2. Real-time Quality Inspection Tour in full production process;
3. Certicate of Analysis provided for each delivery of goods
4. After-sales quality tracking and feedback
5. Customers complains processing management system to guarantee the consistant improving service to each client.
Contact:
Vien Liang|Sale Engineer
T&T Industry Group Ltd
Skype:yuanyuan_vn
Phone: +86 17512098722
E-mail:vien(@)ttindustrygroup.com
We Recommend
Best Price of Urea Molding Compound (UMC)
US $935.00-$1017
PAI 4630/ 4645/ 5030/ 7130 Polymers
US $136.00-$150.00
New Arrivals
New products from manufacturers at wholesale prices
