China factory Cover Flux aluminum die casting manufacturer
- Category: >>>
- Supplier: Adtech Metallurigical Materials Co. Ltd.
Share on (1600586752669):
Product Overview
Description
Product Description
AdTech is dedicated to research and development, production and marketing of granular flux for aluminum alloy casting process. It solves the problem of excessive burning loss and waste gas pollution caused by the chemical reaction of traditional flux in alloy liquid. AdTech's refining flux utilizes unique technology to enhance the traditional degassing and deslagging effect, and this technology is applied to the casting process of multi-series aluminum alloy products such as micron-sized aluminum foil, PS baseboard for printing, canning material, elastic packaging material, railway transportation, aerospace products, cable & wire and other casting aluminum purifying, especially for pure aluminum and high magnesium alloys purifying.
Method of application:
Firstly, remove package, pour into dusting machine, use nitrogen,or argon gas as carrier, spray evenly into molten aluminum, next refining for 20 mins by bottom sequencing with nitrogen,or argon gas.
Secondly, after physical chemic processing, formed bubbles with oxidative slagging separated from molten aluminum, floating out slowly with hydrogen atom, the whole de-slagging and degassing process is done.
Stander Type:
Granular flux is a remelted composition granular chlorine and fluoride salt which is the best product for removing alkali metal and non-metallic's inclusions.
| Item | Type | Diameter | Application | Amount of metal liquid per ton | Refining temperature |
| Granular flux | PM02 | 1-3MM | sodium-free, it is used for refining and cleaning inside furnace for 1-8series Aluminum casting and Aluminum alloy solution. | 0.5-1.0kg | 680-710℃ |
| Granular flux | PM06 | 3-5MM | Removal of alkali metal (Na,Ca,Li),it is used for refining and cleaning inside furnace for precision casting of aluminum alloy. | 0.5-1.0kg | 680-710℃ |
Advantages:
1. Replace furnace chlorine and online refining.
2. Smokeless refining, zero emissions of fluoride, fully meet the emission standards set for environmentally air pollution.
3. Low melting point, lower than 450°C, easy dispersal.
4. Low dosage, it could control the chemical reactions of burning.
5. Effectively remove the alkali metals (Na, Ca, Li) and non-metallic inclusions.
6. Reduce the edge crack during high magnesium alloy rolling.
Instruction:
AdTech's Granular flux is a kind of white with slightly gray fine particles. The Main ingredients are chloride with other compounds. It turns to uniform size after heat treatment and screening. Under the action of nitrogen or argon as the carrier gas, refining flux injected into the melt for two times through powder spraying tank. Make sure the nozzle outlets as close to bottom layer of molten metal as possible, move the nozzle back and forth to ensure flux fully contact with molten aluminum. Then refine the molten metal with N2 or Ar gas in turns at the bottom layer for 20 minutes. After physical-chemical processing in molten aluminum, numerous small bubbles with oxidized slag are separated and formed The bubbles carrying hydrogen atoms slowly rise up and float out, so as to achieve the degassing and deslagging purpose of purification.
| Packing Specifications | |||||
| Item | Internal Packaging | Carton Packaging | Pallet Packaging | Special Packaging | Storage&Guarantee |
| Index | 5kg/bag | 20kg/carton | 1.2T/Pallet | As per requirement | Stored in ventilated and dry environment 12 months |
Company Information
AdTech was founded in 2012, and the China plant has been put into production by the end of 2013. AdTech is an international enterprise concentrating on R & D and manufacturing online degassing and filtrating equipment, ceramic foam filter, hot-top casting materials, nozzle board, repair coating material and flux.AdTech China factory has acquired the ISO 9001 and ISO 14001and SGS. So far, it has covered all the equipment, filtration and high temperature materials required by the aluminum alloy casting industry which fully meets the requirements of customers for various orders.
The Customer
Packing and Delivery
Certifications
FAQ
1.Q:Are u the factory or trading company?
A: We are factory who was founded in 2012 .
2.Q:What's your main products?
A:We are making Online degassing, Filtrating equipment, Ceramic foam filter, Hot-top casting materials, Nozzle board, Repair coating material and Flux to overseas for many years.
3.Q:How can you control your quality?
A:For each production processing, we have complete QC system for the chemical composition and Physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001/ISO14001/SGS.
4.Q:What's the payment term that you can accept?
A: We can accetp T/T , L/C , Western Union ,Cash ect.
5.Q: How can I get samples?
A: We are honor to offer you the samples.
6. Q:Does your company accept customization?
A:We accept OEM service.
7.Q:Can we visit your company?
A:Yes, for sure, you are welcome to visit our company.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
